Ruger

Factory Ruger Ejector Rivet Mark 1, 2, 3 (Long Rivet) *A19

Factory Ruger Mark I, II and III Ejector Rivet (longer rivet)Fits ALL** Mark Series 1, 2 and 3 Pistols ever made. This rivet is just like the Mark IV rivet, but longer (see pics).(**The very first...

Factory Ruger Ejector Rivet Mark 4 (Short Rivet) *C5

Factory Ruger Mark IV Ejector Rivet (shorter rivet)ONLY for MARK IV Pistols.Fits ALL Mark IV Pistols. This rivet is just like the Mark I, II, III rivet, but shorter (see pics).Part #16 in Standard...

Factory Ruger Elevation Screw for Newer Version Mark IV Rear Sight J5

This is for the newer version Rear Sight that Ruger started using On Mark IV pistols in late 2018.SEE PICTURES FOR VERIFICATION

Factory Ruger Elevation Spring for Newer Version Mark IV Rear Sight J6

This is for the newer version Rear Sight that Ruger started using On Mark IV pistols in late 2018.SEE PICTURES FOR VERIFICATION

Factory Ruger EXTENDED Blued Magazine Latch / Release Button for Mark 3, 4 (IV) Standard Frame Pistols (NOT 22/45) *C24*

Factory Ruger EXTENDED Blued Magazine Latch / Button for Mark 3 and 4 Pistols.20" LONGER than standard buttonWill not fit any 22/45 and not needed on Mark 1 or 2 series. No Spring or Plunger...

Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3

Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and...

Factory Ruger Extractor Plunger Mark 1 2 3 4 IV & All 22/45 *A1

Factory Ruger Extractor Plunger fits MOST Mark Series Pistols ever made.(The early Mark 1 Bolts used a shorter plunger and this won't work in them)

Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B*

Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and...

Factory Ruger FDE Hogue TAKEDOWN Stock for Ruger 10/22 STANDARD TAPER Barrels ONLY, off Model 31172

HOGUE EQUIVELENT 21340 Factory Ruger 10/22 stock removed from New Out of Box 10/22's that we parted out. These are Model 31172 stocks made for Ruger by Hogue. For Bull barrels only.Comes with NO...

Factory Ruger Firing Pin Mark 1, 2, 3, 4 IV & All 22/45 #A12

Factory Ruger Firing Pin (Old Style, prior MK-IV version) fits ALL Mark Series Pistols ever made (including MK-IV)**. (**The very first 1949 - 1952 production years could differ, best to observe...

Factory Ruger Firing Pin Mark 4 IV *C1

Factory Ruger Mark IV 4 Firing PinWill fit anything** MARK, yes, even Mark I, II, III **however the very early years of production ('49-'52) could differ, so look closely to be certain if that is...

Factory Ruger Firing Pin Stop Mark 1, 2, 3, 4 IV & All 22/45 *A4

Factory Ruger Firing Pin Stop fits ALL Mark Series Pistols ever made (including MK-IV).(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)These are easy...

Factory Ruger Front Sight Blade ONLY for 75TH Anniversary Pistol 6-7/8" Thin Taper Barrel *J16*

Factory Ruger ONLY for 75TH Anniversary Pistol 6-7/8" Thin Taper Barrel The front sight on your pistol should use a set SCREW (not pin). Please see all pictures before buying.

Factory Ruger Front Sight for Ruger Mark 1 2 3 4 IV & All 22/45 Pistols with Bull, Slab or Fluted Barrels NOT the LITE *E6

Fits ALL Ruger Mark Pistols with Bull, Slab or Fluted BarrelsThis is the older version that was the last STEEL Mark 3 front sight and came on EARLY Mark IVWILL NOT FIT THE *LITE* (it's too tall)

Factory Ruger Front Sight for Ruger Mark 1 2 3 4 IV & All 22/45 Pistols with Bull, Slab or Fluted Barrels NOT the LITE *E24*

Fits ALL Ruger Mark Pistols with Bull, Slab or Fluted BarrelsThis is the latest version and is Aluminum with serrations on the back (eye side)WILL NOT FIT THE *LITE* (it's too tall)

Factory Ruger front sight for Ruger Mark 3 4 IV LITE Pistols ONLY *E10*

The Ruger LITE uses a special shorter front sight. We also have the new longer screw for the LITE front sight, replaces all previous screws.

Factory Ruger Front Sight Pin for Mark 1 2 3 4 IV & All 22/45 Pistols with STANDARD Taper Barrels *E15*

Factory Ruger Blued Front Sight Pin for the "Pencil Barrel" 4-3/4" and 6" barrels ONLY! These pistols typically have Non-Adjustable Rear sightNOT FOR "Heavy Taper" 5-1/4' and 6-7/8" barrels

Factory Ruger front sight Plunger/Latch for GP100 and Super Redhawk (and more) Revolvers *E8*

Factory Ruger front sight Plunger/LatchThis is for a Plunger Latch front sightThere will be a hole right above the muzzle that has a spring loaded plunger in it that holds the sight in place.If you...

Factory Ruger front sight Plunger/Latch Spring for GP100 and Super Redhawk (and more) Revolvers *E7*

Factory Ruger front sight Plunger/Latch SpringThis is for a Plunger Latch front sightThere will be a hole right above the muzzle that has a spring loaded plunger in it that holds the sight in place...

Factory Ruger front sight screw ALLEN HEAD *6-40* for PRE-OCT-2019 Ruger Mark 1 2 3 4 IV & All 22/45 (Except LITE) Pistols *E22

This is the newer Allen Driver type screw (6-40) for Front sights used on Mark Series Bull barrels.It is slightly longer than the old Flat Blade ScrewThese use 5/64" Allen Driver.In October 2019...

Factory Ruger front sight screw ALLEN HEAD *6-48* for POST-OCT-2019 Ruger Mark 4 & MK IV 22/45 (Except LITE) Pistols *D17

This is the newer 6-48 Allen Driver type screw for Front sights used on POST October 2019 Mark IV Bull barrels. These use 5/64" Allen Driver.In October 2019 Ruger changed front sight screw size in...

Factory Ruger front sight screw for Ruger Mark 3 4 IV LITE Pistols ONLY *E21*

The Ruger LITE uses a special longer front sight screw because the upper is aluminum. This longer screw gives more "bite" in the soft material. This screw is unique to the LITE. These use 5/64"...

Factory Ruger Grip Screws for Mark 1 2 3 4 IV (NOT 22/45) Pistols Standard Frame

WILL NOT FIT ANY 22/45 Factory Ruger Grip Screws fit Standard Frames Mark 1, 2, 3, 4These are 3/16" shank. These use 3/32" Allen Driver.

Factory Ruger Gun Lock

Factory Ruger gun lock from brand new, parted out Ruger firearms. Not sure what these were from???

Factory Ruger Gun Lock Bracket comes with some 10/22 rifles

Factory Ruger gun lock bracket from brand new, parted out Ruger 10/22 riflesWe have the LOCK in another listing

Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket.

Factory Ruger gun lock from brand new, parted out Ruger firearms. We have the brackets in another listing,,

Factory Ruger Hammer Pin Blued for ** Mark 1 ** ONLY!! *B1

Hammer Pivot Pin Fits Ruger A-54 and A-100 frames Mark 1 ONLY!!NOT FOR ANYTHING ELSEOBSOLETE PART

Factory Ruger Hammer Pivot Pin Blued for Mark 2, 3 (NOT 22/45) Pistols *A24

Hammer Pivot Pin Fits Ruger Mark Series 2 or 3 This is the BLUED version, STAINLESS version is hereNOT FOR ANY 22/45 or any MARK 4These can provide contrast when mixing blued in a stainless frame.

Factory Ruger Hammer Pivot Pin Stainless for Mark 2, 3 (NOT 22/45) Pistols *A23

Hammer Pivot Pin Fits Ruger Mark Series 2 or 3This is the STAINLESS version, BLUED version is hereNOT FOR ANY 22/45 or any MARK 4These can provide contrast when mixing stainless in a blued frame.

Factory Ruger Hammer Strut for Mark Series 1, 2, 3 and MK 2 3 22/45 Pistols *A17

Factory Ruger Hammer Strut for ALL Mark 1, 2 and 3 Pistols including 22/45 versionsNOT FOR ANY MARK 4 PISTOLS

Factory Ruger Hammer Strut Pin for Mark 1 & 2 Pistols and MK2 22/45 *A14B

Factory Ruger Hammer Strut Pin Fits Mark Series 1 and 2 Pistols and 22/45 Mark 2. This pin is for Mark 1, 2 series only BUT is the same pin as Mark 3 only LONGER. The MK3 hammer is thinner in this...

Factory Ruger Hammer Strut Pin for Mark 3 Pistols and MK3 22/45 *A16

Factory Ruger Hammer Strut Pin Fits Mark Series 3 Pistols and 22/45. This pin is for MK3 series only BUT is the same pin as MK1 and 2 only shorter. The MK3 hammer is thinner in this area due to the...

Factory Ruger HEX Magazine Latch Release Screw for Mark 3 and 4 (IV) Standard Frame Pistols (NOT 22/45) *B24*

Factory Ruger Magazine Latch Screw- ALLEN HEADObsolete Flathead version HEREFits Mark 3 and 4 Standard Frame PistolsWill NOT fit ANY 22/45 and not needed on Mark 1 series

Factory Ruger KA-57 Recoil Rod Spring Assembly for ALL Ruger Mark 1 2 3

Factory Ruger KA-57 Recoil Spring Assembly for Mark 1 2 3.Seen these bent, worn out and lost.

Factory Ruger Loaded Chamber Indicator (LCI) BLACK for Mark 3 Pistols and MK3 22/45

Factory Ruger Loaded Chamber Indicator BLACKNOT FOR MARK 1, 2 or 4Contrary to popular Internet gossip I actually don't follow the belief that these cause feeding issues or stovepipes.Feeding issues...

Factory Ruger Loaded Chamber Indicator (LCI) GREY for Mark 3 Pistols and MK3 22/45

Factory Ruger Loaded Chamber Indicator GREYNOT FOR MARK 1, 2 or 4Contrary to popular Internet gossip I actually don't follow the belief that these cause feeding issues or stovepipes.Feeding issues...

Factory Ruger Loaded Chamber Indicator (LCI) Pivot Pin for Mark 3 Pistols and MK3 22/45

Factory Ruger Loaded Chamber Indicator Pivot PinNOT FOR MARK 1, 2 or 4Contrary to popular Internet gossip I actually don't follow the belief that these cause feeding issues or stovepipes.Feeding...

Factory Ruger Lock Detent Plunger for Mark 3 Mainspring Housings *B4

Factroy Ruger Lock Detent Plunger for Mark 3 Mainspring HousingsThis is part of the Child Safety Lock Mechanism on Mark 3 Mainspring HousingsWorks on BOTH Standard and 22/45

Factory Ruger Lock Pin for Mark 3 Mainspring Housings *B5

Factory Ruger Lock Pin for Mark 3 Mainspring HousingsThis is part of the Child Safety Lock Mechanism on Mark 3 Mainspring HousingsWorks on BOTH Standard and 22/45

Factory Ruger Magazine (90599) Base Block 22/45 Mark IV 4

Factory Ruger magazine base to convert your older 22/45 or standard frame magazines to fit MK IV 22/45Will convert the following magazines; 90045 (MK2 22/45), 90231 (MK3, MK4 Standard Frame), 90229...

Factory Ruger Magazine Latch Release Screw for Mark 3 and 4 (IV) Standard Frame Pistols (NOT 22/45), FLATHEAD *B22*

Factory Ruger Magazine Latch Screw- FLATHEADFits Mark 3 and 4 Standard Frame PistolsWill NOT fit ANY 22/45 and not needed on Mark 1 series

Factory Ruger Magazine Latch Release Spring for All Mark 3 and 4 Pistols and 22/45 Mark 2 *J17*

Factory Ruger Magazine Latch Spring for all Mark 3 and 4 Pistols and 22/45 Mark 2NOT FOR MARK 1 or 2 Standard Frame PistolsMagazine Latch Spring Plunger (KE-61) can be found here

Factory Ruger Magazine Latch Spring Plunger for All Mark 3 and 4 Pistols and 22/45 Mark 2 *C17*

Factory Ruger Magazine Latch Spring Plunger for all Mark 3 and 4 Pistols and 22/45 Mark 2NOT FOR MARK 1 or 2 Standard Frame PistolsSee pictures for part numbers in each model's manualMagazine Latch...

Factory Ruger Mark 1 2 3 4 Mainspring also fits 22/45 MK 2 3 IV *B18

Factory Ruger MainspringFits Mark Series 1, 2, 3 and 4 Pistols Standard and 22/45Replacing a worn out mainspring can help with light strikes. With Marks 1-3, detent balls commonly get launched into...

Factory Ruger Mark 1 2 3 Mainspring (Hammer Spring) Plunger also fits 22/45 *B10

Factory Ruger Mainspring PlungerFits Mark Series 1, 2 and 3 Pistols, both Standard AND 22/45

Factory Ruger Mark 1 2 3 Mainspring Housing Detent Ball *B7

Factory Ruger Mainspring Housing Detent BallFits Mark Series 1, 2 or 3 Pistols Standard and 22/45If you ever have a pin come out of the mainspring housing or are replacing the mainspring, these can...

Factory Ruger Mark 1 2 3 Standard Frame Mainspring Housing Latch (NOT 22/45) *B8*

Factory Ruger Blued Mainspring Housing Latch Fits Mark Series 1, 2 or 3 Pistols These break now and then and can also provide contrast when mixing stainless and blued. WILL NOT WORK IN 22/45 FRAMES...

Factory Ruger Mark 1 2 3 Standard Frame Mainspring Housing Latch Stainless (NOT 22/45) *B9*

Factory Ruger Stainless Mainspring Housing Latch Fits Mark Series 1, 2 or 3 Pistols These break now and then and can also provide contrast when mixing stainless and blued. WILL NOT WORK IN 22/45...

Factory Ruger Mark 1, 2 Target Trigger Overtravel Screw *B3

This is for the Mark 1 and 2 Pistols that came with a "Target Trigger"Pretty sure no Mark 3 ever came with this trigger and its not for Mark 4This is hidden in the Top Front of the trigger, you must...

Factory RUGER Mark 2 and 3 Right Hand Thumbrest Wood grips

WILL NOT FIT ANY 22/45 or Mark I.Factory Ruger RIGHT HAND Thumbrest Laminated Checkered Wood Grips for Mark II and III. Will NOT fit Mark I or 22/45 pistols.This is a natural wood product, color of...

Factory RUGER Mark 2 Black Plastic Checkered Grips *RG2

Factory Ruger Mark II Black Plastic Checkered Grips Includes 4 grip screwsFits Mark II STANDARD Frame pistols, as well late Mark I (A-100) FramesWILL NOT FIT ANY 22/45 WILL NOT FIT EARLY MARK 1...

Factory RUGER Mark 2 Left Hand Thumbrest Wood grips

WILL NOT FIT ANY 22/45Factory Ruger Mark 2 LEFT HAND Thumbrest Laminated Checkered Wood Grips. YES they have the "SR" MedalionThis is a natural wood product, color of wood grain varies.