Sights, Optics, Rails and Scope Rings

Ruger Mark IV Rear Sight Lock/Set Screws for all later MK 4, LITE & 22/45 *D5*

Ruger Mark IV Rear Sight Lock/Set Screws for all later MK 4, LITE & 22/4. These screws have a more aggressive tip and will hold much better than factory screws. SET OF 2 SCREWS. Fits ALL later Ruger Mark 4 with adjustable rear sight (SEE PICTURES)...

Factory Ruger NEWER Style Front Sight for Ruger Mark 1 2 3 4 IV & All 22/45 Pistols with Standard Thin Taper Barrels *E4

NEWER Style Factory Ruger Front Sight Blade for Standard thin-tapered barrelsFits NEWER Ruger Mark Pistols with "Old School" Thin Taper Barrels in 4-3/4" and 6" ONLY. These can be Mark 1, 2, 3 and 4 standard and 22/45 frames. The front sight on your...

NEW VERSION Factory Ruger TAKE OFF Adjustable Rear Sight Black Outline for Mark 1 2 3 4 IV Pistols *D18*

REMOVED FROM NEW UNFIRED PISTOLSFits ALL Ruger Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolI think it's a decent upgrade over previous version,Serated finish on backTwo set screwsStraight blade screwdriver adjustment...

HiViz Fiber Optic Ruger Mark Series, Single Six and Browning Buck Mark LiteWave Front Sight HRBLW01

Improve the performance of your handgun with the new Fiber Optic LITEWAVE® sight. Bright and ultra-durable LITEWAVE® sights will enhance your confidence and shooting experience.Fits;Ruger Mark Series Bull Barrel, Fluted and Slab SidesBuck Mark Bull...

New Factory Ruger Fixed Rear Sight for Mark 1 2 3 4 IV *D4*

Fits ALL Ruger Mark Series Pistols (see notes below)Very early "Standard" pistols had a narrower rear sight dovetail, it is obviously smaller than later models, no measuring should be required to verify if comparing any MK2, MK3 or MK4

Factory Ruger Front Sight for Ruger Mark 1 2 3 4 IV & All 22/45 Pistols with Bull, Slab or Fluted Barrels NOT the LITE *E24*

Fits ALL Ruger Mark Pistols with Bull, Slab or Fluted BarrelsThis is the latest version and is Aluminum with serrations on the back (eye side)WILL NOT FIT THE *LITE* (it's too tall)

Factory Ruger Elevation Screw for Newer Version Mark IV Rear Sight J5

This is for the newer version Rear Sight that Ruger started using On Mark IV pistols in late 2018.SEE PICTURES FOR VERIFICATION

Williams 602588 Adjustable Firesight Fiber Optic Sight Set for Ruger Mark 1 2 3 4 IV & All 22/45 Pistols with Bull, Slab or Fluted Barrels *NOT the LITE Models*

Fits ALL Ruger Mark 1, 2, 3, 4 Pistols with Bull, Slab or Fluted BarrelsThis is the latest version and is Aluminum with serrations on the back (eye side)WILL NOT FIT THE *LITE* (Front sight is too tall)

HiViz Ruger Mark Series 1 2 3 4 (IV), 22/45 and LITE Adjustable Fiber Optic Rear Sight MKAD211

Fits Ruger Mark I, II, III and IV pistols; 22/45 with adjustable rear sight including the 22/45 LITE.if your pistol did not come with Adjustable Rear Sight this will be TOO TALL for your Front Sight Early (1949-1951) Mark pistols had a narrow dovetail...

Factory Ruger Sight Elevator - Elevation Spring for Adjustable Handgun Sights *D10*

Fits ALL Ruger Adjustable Sight Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolRuger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above) This...

Slotted Factory Ruger front sight screw 6-40 threads for Ruger Mark 1 2 3 4 IV & All 22/45 (except LITE) Pistols *E12

This is the old Flat Blade Driver type screw for Front sights used on Mark Series Bull barrels.Ruger switched to slightly longer Allen screws in maybe 2017This is 6-40 threads, NEWER post October 2019 Mark IV STEEL barrels use a 6-48 screw so PAY...

Factory Ruger Front Sight Pin for Mark 1 2 3 4 IV & All 22/45 Pistols with STANDARD Taper Barrels *E15*

Factory Ruger Blued Front Sight Pin for the "Pencil Barrel" 4-3/4" and 6" barrels ONLY! These pistols typically have Non-Adjustable Rear sightNOT FOR "Heavy Taper" 5-1/4' and 6-7/8" barrels

Slotted Factory Ruger Sight Elevator - Elevation Screw for Adjustable Handgun Sights *D9*

Fits ALL Ruger Adjustable Sight Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolRuger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above) This is...

Factory Ruger Sight Blade for Adjustable Handgun Sights .125" Black *D23

Fits ALL Ruger Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolRuger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above) .125" Blade with Black...

Factory Ruger Sight Blade for Adjustable Handgun Sights .140" White Outline *D21

Fits ALL Ruger Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolRuger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above) .140" Blade with White...

Factory Ruger Rear Sight ALLEN Lock Screw Mark 1 2 3 4 IV and 22/45 *D3*

Fits most Ruger Mark Series Pistols (see notes below)Ruger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above)Very early Adjustable sights were "MICRO" brand and I'm not sure...

Volquartsen SILVER Dovetail Picatinny Rail Mount for ALL Mark 1 2 3 4

THESE ARE SILVERThese are LONG discontinued, we just ran across some more.The Volquartsen Dovetail Scope Mount converts the sight dovetail on a Ruger Mark 1, 2, 3, 4, all 22/45 and LITE Pistols to a Picatinny style mount. This mount is the perfect...

Williams 616319 Adjustable Firesight Fiber Optic Sight Set for Mark 1, 2, 3, 4 with HEAVY TAPERED Barrel

Fiber Optic Firesight for Mark II and IV pistols features a click adjustment design for windage and elevation adjustment, high visibility fiber optics for target shooting and hunting, and improved visibility in low light conditions. CNC machined out of...

TruGlo Green Fiber Optic Front Sight for Ruger Mark Pistols and Browning Buck Mark

Fits most RUGER® MKII™, MKIII™, 22/45 and BROWNING® BUCK MARK® Rimfire Pistols This is for standard Bull Barrels only, will NOT fit Aluminum 1" diameter uppersWill also fit Buck Mark Bull barrelsReplaces existing front sightExtremely bright in...

Factory Ruger front sight screw ALLEN HEAD *6-40* for PRE-OCT-2019 Ruger Mark 1 2 3 4 IV & All 22/45 (Except LITE) Pistols *E22

This is the newer Allen Driver type screw (6-40) for Front sights used on Mark Series Bull barrels.It is slightly longer than the old Flat Blade ScrewThese use 5/64" Allen Driver.In October 2019 Ruger changed front sight screw size in all of the steel...

Factory Ruger Tall Sight Blade for Adjustable Handgun Sights .140" High White Outline *D20

Fits ALL Ruger Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolRuger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above) .140" White Outline...

Factory Ruger Sight Blade for Adjustable Handgun Sights .090" Black *D24*

Fits ALL Ruger Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolRuger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above) .090" Blade with Black...

C-More SlideRide Red Dot Poly Standard Switch Black (NO DOT MODULE SEE DESCRIPTION)

*****THIS PRICE IS WITH NO DOT MODULE*****To not VOID the Factory 1 Year Warranty (SEE BELOW) you must purchase the module below of your choice for us to install PRIOR shipping.C-More will service ALL of their products for minimal fee if you choose to...

Factory Ruger Front Sight Blade ONLY for 75TH Anniversary Pistol 6-7/8" Thin Taper Barrel *J16*

Factory Ruger ONLY for 75TH Anniversary Pistol 6-7/8" Thin Taper Barrel The front sight on your pistol should use a set SCREW (not pin). Please see all pictures before buying.

NEWER Style Front Sight Blade SET SCREW for Ruger Mark 4 IV Pistols with Taper Barrels *E9*

This SET SCREW is for the NEWER Style Factory Ruger Front Sight Blade for Standard tapered barrels and the 75th Anniversary 40175 Model SEE PICTURES If you have an empty hole on the right side of your Front Sight, this is the set screw that goes in there...

TruGlo Red Fiber Optic Front Sight for Ruger Mark Pistols and Browning Buck Mark

Fits most RUGER® MKII™, MKIII™, 22/45 and BROWNING® BUCK MARK® Rimfire Pistols This is for standard Bull Barrels only, will NOT fit Aluminum 1" diameter uppersWill also fit Buck Mark Bull barrelsReplaces existing front sightExtremely bright in...

Factory Ruger Sight Blade for Adjustable Handgun Sights "V" White Post *D14*

Fits ALL Ruger Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolRuger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above)"V" Blade with White Post...

TacSol Tactical Solutions Pac-Lite Red LOW .365" Fiber Optic Front Sight will fit Ruger LITE

Tactical Solutions Front Sight LOW fits Current Generation Pac-Lite This sight will not fit older "stepped" barrel height Pac-Lites (barrel is smaller diameter than receiver)Will also fit Ruger LITE onlyThis sight is TOO SHORT for other barrels on Ruger...

Factory Ruger Elevation Spring for Newer Version Mark IV Rear Sight J6

This is for the newer version Rear Sight that Ruger started using On Mark IV pistols in late 2018.SEE PICTURES FOR VERIFICATION

Custom Anodized Factory Ruger Front Sight for Ruger Mark 1 2 3 4 IV & All 22/45 Pistols with Bull, Slab or Fluted Barrels, NOT the LITE- Matte Red

Fits ALL Ruger Mark Pistols with Bull, Slab or Fluted BarrelsThis is the latest version and is Aluminum with serrations on the back (eye side)These are a special run of FACTORY Ruger front sights that we had anodized in our custom colors.Check out our...

TacSol Tactical Solutions Pac-Lite Green LOW .365" Fiber Optic Front Sight will fit Ruger LITE

Tactical Solutions Front Sight LOW fits Current Generation Pac-Lite This sight will not fit older "stepped" barrel height Pac-Lites (barrel is smaller diameter than receiver)Will also fit Ruger LITE onlyThis sight is TOO SHORT for other barrels on Ruger...

TacSol Tactical Solutions Pac-Lite Red HIGH .440" Fiber Optic Front Sight will fit Ruger Steel Bull type barrels

Tactical Solutions Front Sight HIGH (.440") fits FIRST Generation Pac-Lite with step from receiver to barrel.Will also fit Ruger Bull, Slab Side and Fluted STEEL BARRELS This sight will not fit newer same barrel height Pac-Lites (barrel is same diameter...

Factory Ruger Sight Windage Spring for Adjustable Handgun Sights *D16*

Fits ALL Ruger Adjustable Sight Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolThis spring is also used on most Ruger Adjustable Sight RevolversThis should fit Pac-Lite rear sight alsoRuger Mark IV pistols from late 2018...

Factory Ruger Windage Screw for Adjustable Handgun Sights *D15*

Fits MOST Ruger Adjustable Sight Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolRuger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above)This is...

OBSOLETE Factory Ruger Rear Sight Pivot Pin for Mark 1 2 3 4 IV Pistols *D7*

Fits ALL Ruger Mark Series PistolsRuger "LITE" is still a Mark series pistol Ruger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above)If you have an OLD EARLY Mark 1 with the...

HiViz Front Sight for Ruger Mark Pistols with HEAVY Taper Barrels

This is an interchangeable style Ruger Mark Series HEAVY TAPER Barrel pistol sight. This is for HEAVY TAPER Barrels only, will NOT fit Standard Taper BarrelsIt includes six fiber optic family LitePipes, in various colors, a carrying case, and a key to...

C-More SlideRide Red Dot Poly Standard Switch RED (NO DOT MODULE SEE DESCRIPTION)

*****THIS PRICE IS WITH NO DOT MODULE*****To not VOID the Factory 1 Year Warranty (SEE BELOW) you must purchase the module below of your choice for us to install PRIOR shipping.C-More will service ALL of their products for minimal fee if you choose to...

Volquartsen Target Front Sight for 6" LLV (Scorpion, Mamba) and LLV-4 VCSFS-6

ONLY FITS 6" LLV UPPER(here's the sight for the 4.5" upper)Replacement front sights designed specifically for either the Volquartsen Scorpion pistol or LLV Competition Upper. Drop-in sights use existing pre-drilled & tapped holes.Model:VCSFS-6UPC:...

Factory Ruger Windage Screw for Newer Version Mark IV Rear Sight J9

This is for the newer version Rear Sight that Ruger started using On Mark IV pistols in late 2018.SEE PICTURES FOR VERIFICATION

C-More SlideRide Red Dot Poly Standard Switch BLUE (NO DOT MODULE SEE DESCRIPTION)

*****THIS PRICE IS WITH NO DOT MODULE*****To not VOID the Factory 1 Year Warranty (SEE BELOW) you must purchase the module below of your choice for us to install PRIOR shipping.C-More will service ALL of their products for minimal fee if you choose to...

C-More RTS2B-V5 Mini Red Dot Sight 6 moa

* V5 Hardened Electronics with Motion Sensing System and Auto Off* Heads Up Display for Fastest Target Acquisition* Super Bright Red Dot Available in 3, 6, 8, 10 and 12 MOA with 10 Manual Brightness Settings* 1 MOA Click Adjustments for Windage and...

Volquartsen Mark 3 LLV Scorpion Black Accessory Rail VCSN-R

This accessory rail mounts to the underside of the barrel on the Scorpion Pistol and LLV Competition Pistol Upper.NOT ALL SCORPION OR MARK 3 LLV UPPERS ARE DRILLED AND TAPPED FOR THIS RAIL!!PLEASE CHECK YOURS BEFORE ORDERINGModel: VCSN-R

Factory Ruger OLDER Style Front Sight for Ruger Mark 1 2 3 4 IV & All 22/45 Pistols with Standard Thin Taper Barrels *E14

OLDER Style Factory Ruger Front Sight Blade for Standard thin-tapered barrelsFits OLDER Ruger Mark Pistols with "Old School" Thin Taper Barrels in 4-3/4" and 6" ONLY. These can be Mark 1, 2, 3 and 4 standard and 22/45 frames. The front sight on your...

Custom Anodized Factory Ruger Front Sight for Ruger Mark 1 2 3 4 IV & All 22/45 Pistols with Bull, Slab or Fluted Barrels, NOT the LITE- Matte Blue

Fits ALL Ruger Mark Pistols with Bull, Slab or Fluted BarrelsThis is the latest version and is Aluminum with serrations on the back (eye side)These are a special run of FACTORY Ruger front sights that we had anodized in our custom colors.Check out our...

C-More RTS2B-V5 Mini Red Dot Sight 6 moa WITH PICATINNY BASE

This version includes removable Picatinny Base   * V5 Hardened Electronics with Motion Sensing System and Auto Off* Heads Up Display for Fastest Target Acquisition* Super Bright Red Dot Available in 3, 6, 8, 10 and 12 MOA with 10 Manual Brightness...

C-More RTS2B-V5 Mini Red Dot Sight 8 moa WITH PICATINNY BASE

This version includes removable Picatinny Base   * V5 Hardened Electronics with Motion Sensing System and Auto Off* Heads Up Display for Fastest Target Acquisition* Super Bright Red Dot Available in 3, 6, 8, 10 and 12 MOA with 10 Manual Brightness...

C-More RTS2B-V5 Mini Red Dot Sight 12 moa WITH PICATINNY BASE

This version includes removable Picatinny Base   * V5 Hardened Electronics with Motion Sensing System and Auto Off* Heads Up Display for Fastest Target Acquisition* Super Bright Red Dot Available in 3, 6, 8, 10 and 12 MOA with 10 Manual Brightness...

C-More RTS2B-V5 Mini Red Dot Sight 10 moa WITH PICATINNY BASE

This version includes removable Picatinny Base   * V5 Hardened Electronics with Motion Sensing System and Auto Off* Heads Up Display for Fastest Target Acquisition* Super Bright Red Dot Available in 3, 6, 8, 10 and 12 MOA with 10 Manual Brightness...

C-More RTS2B-V5 Mini Red Dot Sight 12 moa

* V5 Hardened Electronics with Motion Sensing System and Auto Off* Heads Up Display for Fastest Target Acquisition* Super Bright Red Dot Available in 3, 6, 8, 10 and 12 MOA with 10 Manual Brightness Settings* 1 MOA Click Adjustments for Windage and...

Custom Anodized Factory Ruger Front Sight for Ruger Mark 1 2 3 4 IV & All 22/45 Pistols with Bull, Slab or Fluted Barrels, NOT the LITE- Matte Turquoise

Fits ALL Ruger Mark Pistols with Bull, Slab or Fluted BarrelsThis is the latest version and is Aluminum with serrations on the back (eye side)These are a special run of FACTORY Ruger front sights that we had anodized in our custom colors.Check out our...

Custom Anodized Factory Ruger Front Sight for Ruger Mark 1 2 3 4 IV & All 22/45 Pistols with Bull, Slab or Fluted Barrels, NOT the LITE- Matte Raspberry Pink

Fits ALL Ruger Mark Pistols with Bull, Slab or Fluted BarrelsThis is the latest version and is Aluminum with serrations on the back (eye side)These are a special run of FACTORY Ruger front sights that we had anodized in our custom colors.Check out our...

Custom Anodized Factory Ruger Front Sight for Ruger Mark 1 2 3 4 IV & All 22/45 Pistols with Bull, Slab or Fluted Barrels, NOT the LITE- Matte Purple

Fits ALL Ruger Mark Pistols with Bull, Slab or Fluted BarrelsThis is the latest version and is Aluminum with serrations on the back (eye side)These are a special run of FACTORY Ruger front sights that we had anodized in our custom colors.Check out our...