Magazines and Magazine Parts

Ruger NICKEL 90599 Magazine for Mark IV 4 22/45

WILL NOT FIT STANDARD FRAMES ONLY FITS 22/45 FRAMES.ALL Ruger LITE are 22/45 from the factory.Factory Ruger 90599 10 round magazine is what Ruger ships with new Mark 4 - 22/45 pistols.This magazine will also work in Mark 2 - 22/45 and Mark 3 - 22/45...

Factory Ruger Magazine (90599) Base Block 22/45 Mark IV 4

Factory Ruger magazine base to convert your older 22/45 or standard frame magazines to fit MK IV 22/45Will convert the following magazines; 90045 (MK2 22/45), 90231 (MK3, MK4 Standard Frame), 90229 (MK3 22/45) Click Here for our page on how to properly...

Ruger NICKEL 90231 Magazine for Mark 3 4 IV Standard Frame Pistols

WILL NOT FIT 22/45Factory Ruger 90231 10 round magazine is what Ruger shipped with new Mark 3 and ships with Mark 4 pistols.This magazine will also work in Mark 2 and Mark 1 pistols.For older Mark 1 (right hand follower button) you will need to swap...

Volquartsen SureFeed Magazine Follower Spring for Ruger Mark III and IV 5 PACK VC4FS-5

The SureFeed Magazine Follower Spring for the Ruger MKIII and MK IV is 25% stronger than the factory spring. The increased spring rate improves feeding in all Ruger MKIII and MK IV magazines. The SureFeed Magazine Follower Spring will eliminate feeding...

USED Ruger NICKEL 90231 Magazine for Mark 3 4 IV Standard Frame Pistols

CLEAN USED --- Have been ultrasonically cleaned and then submerged in oil WILL NOT FIT 22/45Factory Ruger 90231 10 round magazine is what Ruger shipped with new Mark 3 and ships with Mark 4 pistols.This magazine will also work in Mark 2 and Mark 1...

Volquartsen Magazine Follower Button for Ruger Mark 1, 2, 3, 4 Pistols - 2 Pack NEW style

Have a sluggish MKII, MKIII, MK IV, or 22/45 Ruger magazine? Chances are the spring is fine but the actual culprit is the metal on metal contact of the magazine button. Not only does this make magazines hard to load but it can also cause feeding...

Ruger Magazine 90231, 90046, 90062 BASE BLOCK for Ruger Mark 2 3 4 IV Standard Frame Pistols (NOT 22/45)

WILL NOT FIT 22/45Factory Ruger 90231 Base BlockThis is the base that is used on 90231 and 90046 magazinesIt is also the same as what is used on 90062 only in BlackYou can use this to change your 90229 and 90599 magazines to fit Standard frames vs...

Ruger Magazine Block Retaining Plunger for ALL Modern Ruger "Mark" Pistol Magazines 1 2 3 4 IV & all 22/45

This Plunger fits in ALL Mark series magazines with the plastic base pads (from factory)Will NOT fit old chrome base Mark 1 magazines.These can get shot into another dimension when disassembling a magazine. Click Here for our page on how to properly...

Volquartsen Magazine Follower Button for Ruger Mark 1, 2, 3, 4 Pistols - 10 Pack NEW style

Have a sluggish MKII, MKIII, MK IV, or 22/45 Ruger magazine? Chances are the spring is fine but the actual culprit is the metal on metal contact of the magazine button. Not only does this make magazines hard to load but it can also cause feeding...

USED BLUED Ruger 90231 Magazine for Mark 3 4 IV Standard Frame Pistols

WILL NOT FIT 22/45 FRAME PISTOLS UNLESS YOU CHANGE BASEI ALWAYS prefered the BLUED Mags over the Nickel Plated ones These have NOT been made in several years now CLEAN USED 90231 10 round magazines for STANDARD FRAME Mark 3 and 4 PistolsWe run these...

Ruger Magazine (90231, 90046, 90062) Silver Base Block for Ruger Mark 2 3 4 IV Standard Frame Pistols (NOT 22/45)

WILL NOT FIT 22/45Factory Ruger 90231 Base BlockThis is the base that is used on 90231 and 90046 magazines only in SilverIt is also the same as what is used on 90062You can use this to change your 90229 and 90599 magazines to fit Standard frames vs...

Volquartsen SureFeed Magazine Follower Spring for Ruger Mark III and IV 2 PACK

The SureFeed Magazine Follower Spring for the Ruger MKIII and MK IV is 25% stronger than the factory spring. The increased spring rate improves feeding in all Ruger MKIII and MK IV magazines. The SureFeed Magazine Follower Spring will eliminate feeding...

Volquartsen Mark IV Magazine Base Pads 2 Pack- VFTB-2

These base pads provide more positive magazine insertion, easier removal, and lightning fast reloads. CNC-machined from billet aluminum These base pads fit both the Mamba-TF and Ruger MK IV magazines. These are the perfect complement to our target grips...

Ruger Magazine Spring for ALL Modern Ruger "Mark" Pistol magazines 1 2 3 4 IV & all 22/45

This spring fits in ALL Mark series magazines with the plastic base pads (from factory)Will NOT fir old chrome base Mark 1 magazines.Fresh spring can help feeding issues with full mags. Click Here for our page on how to properly adjust your magazines...

Ruger Magazine Follower for ALL Modern Ruger "Mark" 10 rnd Pistol Magazines 1 2 3 4 IV & all 22/45

This Follower fits in ALL Mark series magazines with the plastic base pads (from factory) Will NOT fit old chrome base Mark 1 magazines. Click HERE for our page on how to properly adjust your magazines to feed properly *NO RUGER magazine comes from...

Ruger 10 round NICKEL 90231 Magazine with SILVER Base for Mark 3 4 IV Standard Frame Pistols

WILL NOT FIT 22/45Factory Ruger 90231 10 round magazine with SILVER BASE 90231 is what Ruger shipped with new Mark 3 and ships with Mark 4 pistols.This magazine will also work in Mark 2 and Mark 1 pistols.For older Mark 1 (right hand follower button)...

Volquartsen Mark IV 22/45 Magazine Base Pads 5 Pack

These base pads provide more positive magazine insertion, easier removal, and lightning fast reloads. CNC-machined from billet aluminum, these base pads fit the Mark IV 22/45 mag and will convert a Mark III mag into a Mark IV 22/45 mag.Does NOT come with...

Volquartsen Magazine Follower Button for Ruger Mark 1, 2, 3, 4 Pistols - 10 Pack OLD style

Have a sluggish MKII, MKIII, MK IV, or 22/45 Ruger magazine? Chances are the spring is fine but the actual culprit is the metal on metal contact of the magazine button. Not only does this make magazines hard to load but it can also cause feeding...

Volquartsen Mark IV Magazine Base Pads 5 Pack

These base pads provide more positive magazine insertion, easier removal, and lightning fast reloads. CNC-machined from billet aluminum These base pads fit both the Mamba-TF and Ruger MK IV magazines. These are the perfect complement to our target grips...

Volquartsen Mark IV 22/45 Magazine Base Pad and Extended Magazine Release Kit 5 Pack

This kit includes both the extended mag release for the Ruger Mark IV 22/45 and the new Magazine Base Pads for the Mark IV 22/45. The CNC-machined aluminum base pads make magazine insertion and removal quicker and easier-for lightning fast reloads and...

Volquartsen Mark IV 22/45 Magazine Base Pad and Extended Magazine Release Kit 2 Pack

This kit includes both the extended mag release for the Ruger Mark IV 22/45 and the new Magazine Base Pads for the Mark IV 22/45. The CNC-machined aluminum base pads make magazine insertion and removal quicker and easier-for lightning fast reloads and...

Volquartsen Magazine Follower Button for Ruger Mark 1, 2, 3, 4 Pistols - 2 Pack OLD style

Have a sluggish MKII, MKIII, MK IV, or 22/45 Ruger magazine? Chances are the spring is fine but the actual culprit is the metal on metal contact of the magazine button. Not only does this make magazines hard to load but it can also cause feeding...

Volquartsen Mark IV 22/45 Magazine Base Pads 2 Pack

These base pads provide more positive magazine insertion, easier removal, and lightning fast reloads. CNC-machined from billet aluminum, these base pads fit the Mark IV 22/45 mag and will convert a Mark III mag into a Mark IV 22/45 mag.Does NOT come with...

TacSol Tactical Solutions 10 rnd "Slam Mag" Magazine for Mark 2 3 4 22/45 Pistols PL-MKIV-MAG 90599

Tactical Solutions "Slam Mag" fits All Ruger Mark 2, 3 and 4 "22/45" models***WILL NOT FIT STANDARD FRAMES*** Impact resistant, Zytel extended length basepad aids in seating the magazine properly.

USED Ruger 90599 Magazine for Mark IV 4 22/45

USED MAGAZINEWILL NOT FIT STANDARD FRAMES ONLY FITS 22/45 FRAMES.ALL Ruger LITE are 22/45 from the factory.Factory Ruger 90599 10 round magazine is what Ruger ships with new Mark 4 - 22/45 pistols.This magazine will also work in Mark 2 - 22/45 and Mark...

USED Ruger 90231 Magazine for Mark 3 4 IV Standard Frame Pistols-1701337247

CLEAN USED 90231 10 round magazines for Mark 3 and 4 Standard frame pistols (NOT 22/45)These magazines are 10 round WILL NOT FIT ANY 22/45We run these through an ultrasonic cleaner, not saying they are 100% clean but we do clean themWe are NOT going to...