Sights, Optics, Rails and Scope Rings

Ruger Blued Scope Base Filler HEX Allen Screws for Mark 1 2 3 4 IV & All 22/45 with Factory Drilled Holes *D12

Ruger Blued Scope Base Filler Allen Screws for Mark Series Pistols with Factory Drilled Holes6-48 NF

Factory Ruger Reversible Picatinny Rail for ALL Factory Drilled/Tapped Mark 1 2 3 4 IV Pistols, 22/45 and Tac-Sol Pac-Lite (Pac-Lite needs different screws) 90623

Ruger Reversible Picatinny Rail for ALL Mark Series PistolsWorks on FACTORY-DRILLED Mark Series Pistols.Same rail that ships with Ruger Mark IV LITE and Tactical Series Pistols-reversible-4-3/8" long-black aluminum-3 screws included (6-48 threads)3...

Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13

Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads

Factory Ruger Elevation Screw for Newer Version Mark IV Rear Sight J5

This is for the newer version Rear Sight that Ruger started using On Mark IV pistols in late 2018.SEE PICTURES FOR VERIFICATION

Volquartsen Target Rear Sight for Mark 2, 3, 4 Series- VC2TL

Fits Ruger Mark Uppers (the sight for the LLV is here)Replacement Rear sight designed specifically for Mark 2, 3, and 4 uppers with 0.875" bull barrels. The sight for LLV is a little higher and will NOT work for these. Drop-in sights use existing...

Factory Ruger front sight screw ALLEN HEAD *6-48* for POST-OCT-2019 Ruger Mark 4 & MK IV 22/45 (Except LITE) Pistols *D17

This is the newer 6-48 Allen Driver type screw for Front sights used on POST October 2019 Mark IV Bull barrels. These use 5/64" Allen Driver.In October 2019 Ruger changed front sight screw size in all of the steel Mark Pistol barrels to 6-48.PAY...

Factory Ruger Front Sight for Ruger Mark 1 2 3 4 IV & All 22/45 Pistols with Bull, Slab or Fluted Barrels NOT the LITE *E24*

Fits ALL Ruger Mark Pistols with Bull, Slab or Fluted BarrelsThis is the latest version and is Aluminum with serrations on the back (eye side)WILL NOT FIT THE *LITE* (it's too tall)

Blued Front Sight Filler Screw for Pre October 2019 Mark 1 2 3 4 IV & All 22/45 with **6-40 Holes *E23

Blued Front Sight Filler Screw for Mark 1 2 3 4 IV & All 22/45 with **6-40 Holes6-40 NCIn October 2019 Ruger switched the old 6-40 front sight threads for 6-48This screw will not fit the newer pistols, will only fit the older ones.BE CAREFUL AND CHECK...

Williams Adjustable Fiber Optic Firesight for Mark 3 and 4 LITE -ONLY-

Firesight with a dovetail rear sight and screw-on front sight for Mark III and IV LITE Uppers. Features a click adjustment design for windage and elevation adjustment, high visibility fiber optics for target shooting and hunting, and improved visibility...

Volquartsen Target Rear Sight for LLV (Scorpion, Mamba) and LLV-4 (Mamba) VC2TL-H

ONLY FITS LLV UPPERS. (the sight for Ruger Mark Uppers is here)Replacement Rear sight designed specifically for Volquartsen Uppers. Will NOT work for Ruger uppers as its too tall for factory Ruger front sights.Model: VC2TL-HUPC: 810162014711

Ruger Blued Scope Base Filler Screws for Mark 1 2 3 4 IV & All 22/45 with Factory Drilled Holes *E19

Ruger Blued Scope Base Filler Screws for Mark Series Pistols with Factory Drilled Holes6-48 NF

Factory Ruger front sight screw ALLEN HEAD *6-40* for PRE-OCT-2019 Ruger Mark 1 2 3 4 IV & All 22/45 (Except LITE) Pistols *E22

This is the newer Allen Driver type screw (6-40) for Front sights used on Mark Series Bull barrels.It is slightly longer than the old Flat Blade ScrewThese use 5/64" Allen Driver.In October 2019 Ruger changed front sight screw size in all of the steel...

Factory Ruger Front Sight Pin for Mark 1 2 3 4 IV & All 22/45 Pistols with STANDARD Taper Barrels *E15*

Factory Ruger Blued Front Sight Pin for the "Pencil Barrel" 4-3/4" and 6" barrels ONLY! These pistols typically have Non-Adjustable Rear sightNOT FOR "Heavy Taper" 5-1/4' and 6-7/8" barrels

Factory Ruger Sight Blade for Adjustable Handgun Sights .140" White Outline *D21

Fits ALL Ruger Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolRuger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above) .140" Blade with White...

HiViz Ruger Mark Series 1 2 3 4 (IV), 22/45 and LITE Adjustable Fiber Optic Rear Sight MKAD211

Fits Ruger Mark I, II, III and IV pistols; 22/45 with adjustable rear sight including the 22/45 LITE.if your pistol did not come with Adjustable Rear Sight this will be TOO TALL for your Front Sight Early (1949-1951) Mark pistols had a narrow dovetail...

Custom Anodized Factory Ruger Reversible Picatinny Rail for ALL Factory Drilled/Tapped Mark 1 2 3 4 IV Pistols, 22/45 and Tac-Sol Pac-Lite (Pac-Lite needs different screws) in Matte Blue

Ruger Reversible Picatinny Rail for ALL Mark Series PistolsWorks on FACTORY-DRILLED Mark Series Pistols.Same rail that ships with Ruger Mark IV LITE and Tactical Series Pistols-reversible-4-3/8" long-anodized aluminumThese are a special run of FACTORY...

Factory Ruger OLDER Style Front Sight for Ruger Mark 1 2 3 4 IV & All 22/45 Pistols with Standard Thin Taper Barrels *E14

OLDER Style Factory Ruger Front Sight Blade for Standard thin-tapered barrelsFits OLDER Ruger Mark Pistols with "Old School" Thin Taper Barrels in 4-3/4" and 6" ONLY. These can be Mark 1, 2, 3 and 4 standard and 22/45 frames. The front sight on your...

Volquartsen SILVER Dovetail Picatinny Rail Mount for ALL Mark 1 2 3 4

THESE ARE SILVERThese are LONG discontinued, we just ran across some more.The Volquartsen Dovetail Scope Mount converts the sight dovetail on a Ruger Mark 1, 2, 3, 4, all 22/45 and LITE Pistols to a Picatinny style mount. This mount is the perfect...

TacSol Tactical Solutions Pac-Lite Red LOW .365" Fiber Optic Front Sight will fit Ruger LITE

Tactical Solutions Front Sight LOW fits Current Generation Pac-Lite This sight will not fit older "stepped" barrel height Pac-Lites (barrel is smaller diameter than receiver)Will also fit Ruger LITE onlyThis sight is TOO SHORT for other barrels on Ruger...

Factory Ruger Black Weaver Rail for ALL Factory Drilled/Tapped Mark 1 2 3 4 IV Pistols, 22/45 and Tac-Sol Pac-Lite (Pac-Lite needs different screws) 90228

Ruger Weaver Rail for ALL Mark Series PistolsWorks on FACTORY-DRILLED Mark Series Pistols.Same rail that shipped with most Ruger Mark 3 Blued Pistols-4.69" long-black aluminum3 screws included**6-48 threads are for FACTORY RUGER, check your thread pitch...

Ruger Stainless Scope Base Filler Screws for Mark 1 2 3 4 IV & All 22/45 Pistols with Factory Drilled Holes *E20*

Ruger Stainless Scope Base Filler Screws for Mark Series Pistols with Factory Drilled Holes6-48 NF

Slotted Factory Ruger front sight screw 6-40 threads for Ruger Mark 1 2 3 4 IV & All 22/45 (except LITE) Pistols *E12

This is the old Flat Blade Driver type screw for Front sights used on Mark Series Bull barrels.Ruger switched to slightly longer Allen screws in maybe 2017This is 6-40 threads, NEWER post October 2019 Mark IV STEEL barrels use a 6-48 screw so PAY...

Factory Ruger Sight Elevator - Elevation Spring for Adjustable Handgun Sights *D10*

Fits ALL Ruger Adjustable Sight Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolRuger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above) This...

Factory Ruger Elevation Spring for Newer Version Mark IV Rear Sight J6

This is for the newer version Rear Sight that Ruger started using On Mark IV pistols in late 2018.SEE PICTURES FOR VERIFICATION

HiViz Fiber Optic Ruger 22/45 LITE Mark 3 4 IVand Tac-Sol Pac-Lite, LiteWave Front Sight

Improve the performance of your Ruger 22/45 LITE with the new Fiber Optic LITEWAVE® sight. Our bright and ultra-durable LITEWAVE® sights will enhance your confidence and shooting experience. This is NOT for standard Bull Barrels, only Aluminum 1"...

HiViz Fiber Optic Ruger Mark Series, Single Six and Browning Buck Mark LiteWave Front Sight HRBLW01

Improve the performance of your handgun with the new Fiber Optic LITEWAVE® sight. Bright and ultra-durable LITEWAVE® sights will enhance your confidence and shooting experience.Fits;Ruger Mark Series Bull Barrel, Fluted and Slab SidesBuck Mark Bull...

Ruger STAINLESS Scope Base Filler HEX Allen Screws for Mark 1 2 3 4 IV & All 22/45 with Factory Drilled Holes *D11

Ruger STAINLESS Scope Base Filler Allen Screws for Mark Series Pistols with Factory Drilled Holes6-48 NF

Custom Anodized Factory Ruger Reversible Picatinny Rail for ALL Factory Drilled/Tapped Mark 1 2 3 4 IV Pistols, 22/45 and Tac-Sol Pac-Lite (Pac-Lite needs different screws) in Matte Red

Ruger Reversible Picatinny Rail for ALL Mark Series PistolsWorks on FACTORY-DRILLED Mark Series Pistols.Same rail that ships with Ruger Mark IV LITE and Tactical Series Pistols-reversible-4-3/8" long-anodized aluminumThese are a special run of FACTORY...

Custom Anodized Factory Ruger Reversible Picatinny Rail for ALL Factory Drilled/Tapped Mark 1 2 3 4 IV Pistols, 22/45 and Tac-Sol Pac-Lite (Pac-Lite needs different screws) in Matte Purple

Ruger Reversible Picatinny Rail for ALL Mark Series PistolsWorks on FACTORY-DRILLED Mark Series Pistols.Same rail that ships with Ruger Mark IV LITE and Tactical Series Pistols-reversible-4-3/8" long-anodized aluminumThese are a special run of FACTORY...

Custom Anodized Factory Ruger Reversible Picatinny Rail for ALL Factory Drilled/Tapped Mark 1 2 3 4 IV Pistols, 22/45 and Tac-Sol Pac-Lite (Pac-Lite needs different screws) in Matte OD Green

Ruger Reversible Picatinny Rail for ALL Mark Series PistolsWorks on FACTORY-DRILLED Mark Series Pistols.Same rail that ships with Ruger Mark IV LITE and Tactical Series Pistols-reversible-4-3/8" long-anodized aluminumThese are a special run of FACTORY...

Custom Anodized Factory Ruger Reversible Picatinny Rail for ALL Factory Drilled/Tapped Mark 1 2 3 4 IV Pistols, 22/45 and Tac-Sol Pac-Lite (Pac-Lite needs different screws) in Gun Metal Gray

Ruger Reversible Picatinny Rail for ALL Mark Series PistolsWorks on FACTORY-DRILLED Mark Series Pistols.Same rail that ships with Ruger Mark IV LITE and Tactical Series Pistols-reversible-4-3/8" long-anodized aluminumThese are a special run of FACTORY...

Factory Ruger NEWER Style Front Sight for Ruger Mark 1 2 3 4 IV & All 22/45 Pistols with Standard Thin Taper Barrels *E4

NEWER Style Factory Ruger Front Sight Blade for Standard thin-tapered barrelsFits NEWER Ruger Mark Pistols with "Old School" Thin Taper Barrels in 4-3/4" and 6" ONLY. These can be Mark 1, 2, 3 and 4 standard and 22/45 frames. The front sight on your...

Custom Anodized Factory Ruger front sight for Ruger Mark 3 4 IV LITE Pistols ONLY in Matte Turquoise

The Ruger LITE uses a special shorter front sight. We also have the new longer screw for the LITE front sight, replaces all previous screws. These are a special run of FACTORY Ruger front sights that we had anodized in our custom colors.

Custom Anodized Factory Ruger Front Sight for Ruger Mark 1 2 3 4 IV & All 22/45 Pistols with Bull, Slab or Fluted Barrels, NOT the LITE- Matte Turquoise

Fits ALL Ruger Mark Pistols with Bull, Slab or Fluted BarrelsThis is the latest version and is Aluminum with serrations on the back (eye side)These are a special run of FACTORY Ruger front sights that we had anodized in our custom colors.Check out our...

Custom Anodized Factory Ruger Front Sight for Ruger Mark 1 2 3 4 IV & All 22/45 Pistols with Bull, Slab or Fluted Barrels, NOT the LITE- Matte Raspberry Pink

Fits ALL Ruger Mark Pistols with Bull, Slab or Fluted BarrelsThis is the latest version and is Aluminum with serrations on the back (eye side)These are a special run of FACTORY Ruger front sights that we had anodized in our custom colors.Check out our...

Custom Anodized Factory Ruger Front Sight for Ruger Mark 1 2 3 4 IV & All 22/45 Pistols with Bull, Slab or Fluted Barrels, NOT the LITE- Matte Purple

Fits ALL Ruger Mark Pistols with Bull, Slab or Fluted BarrelsThis is the latest version and is Aluminum with serrations on the back (eye side)These are a special run of FACTORY Ruger front sights that we had anodized in our custom colors.Check out our...

Custom Anodized Factory Ruger Front Sight for Ruger Mark 1 2 3 4 IV & All 22/45 Pistols with Bull, Slab or Fluted Barrels, NOT the LITE- Matte OD Green

Fits ALL Ruger Mark Pistols with Bull, Slab or Fluted BarrelsThis is the latest version and is Aluminum with serrations on the back (eye side)These are a special run of FACTORY Ruger front sights that we had anodized in our custom colors.Check out our...

Custom Anodized Factory Ruger Front Sight for Ruger Mark 1 2 3 4 IV & All 22/45 Pistols with Bull, Slab or Fluted Barrels, NOT the LITE- Matte Blue

Fits ALL Ruger Mark Pistols with Bull, Slab or Fluted BarrelsThis is the latest version and is Aluminum with serrations on the back (eye side)These are a special run of FACTORY Ruger front sights that we had anodized in our custom colors.Check out our...

Custom Anodized Factory Ruger Front Sight for Ruger Mark 1 2 3 4 IV & All 22/45 Pistols with Bull, Slab or Fluted Barrels, NOT the LITE- Gun Metal Gray

Fits ALL Ruger Mark Pistols with Bull, Slab or Fluted BarrelsThis is the latest version and is Aluminum with serrations on the back (eye side)These are a special run of FACTORY Ruger front sights that we had anodized in our custom colors.Check out our...

Factory Ruger Front Sight for Ruger Mark 1 2 3 4 IV & All 22/45 Pistols with Bull, Slab or Fluted Barrels NOT the LITE *E6

Fits ALL Ruger Mark Pistols with Bull, Slab or Fluted BarrelsThis is the older version that was the last STEEL Mark 3 front sight and came on EARLY Mark IVWILL NOT FIT THE *LITE* (it's too tall)

Williams Adjustable Fiber Optic Firesight for Mark II and Mark IV with HEAVY TAPERED Barrel

Fiber Optic Firesight for Mark II and IV pistols features a click adjustment design for windage and elevation adjustment, high visibility fiber optics for target shooting and hunting, and improved visibility in low light conditions. CNC machined out of...

Viridian RFX35 Reflex GREEN Dot Sight 3 MOA

Viridian Optics- RFX35 GREEN Dot Reflex Sight- RMR FootprintEYES SEE GREEN BETTER! - 3 MOA Green Dot - 22x26 mm viewing window - RMR Mounting Footprint & Picatinny mount included - Auto shut off and INSTANT-ON® technology - High grade...

Volquartsen Mark 3 LLV Scorpion Black Accessory Rail VCSN-R

This accessory rail mounts to the underside of the barrel on the Scorpion Pistol and LLV Competition Pistol Upper.NOT ALL SCORPION OR MARK 3 LLV UPPERS ARE DRILLED AND TAPPED FOR THIS RAIL!!PLEASE CHECK YOURS BEFORE ORDERINGModel: VCSN-R

Volquartsen Target Front Sight for 6" LLV (Scorpion, Mamba) and LLV-4 VCSFS-6

ONLY FITS 6" LLV UPPER(here's the sight for the 4.5" upper)Replacement front sights designed specifically for either the Volquartsen Scorpion pistol or LLV Competition Upper. Drop-in sights use existing pre-drilled & tapped holes.Model:VCSFS-6UPC:...

Volquartsen Target Front Sight for 4.5" LLV (Scorpion, Mamba) and LLV-4 VCSFS-4

ONLY FITS 4.5" LLV UPPER(here's the sight for the 6" upper)Replacement front sights designed specifically for either the Volquartsen Scorpion pistol or LLV Competition Upper. Drop-in sights use existing pre-drilled & tapped holes.Model:VCSFS-4 UPC:...

Ultradot L/T Mini Red Dot Sight Rail Mount 4 moa

* Heads Up Display for Fastest Target Acquisition* Super Bright Red Dot in 4 MOA with 10 Manual Brightness Settings* 1 MOA Click Adjustments for Windage and Elevation Featuring a Positive Locking Screw* Removable Battery Tray Eliminates Re-Zeroing When...

TacSol Tactical Solutions Pac-Lite Green LOW .365" Fiber Optic Front Sight will fit Ruger LITE

Tactical Solutions Front Sight LOW fits Current Generation Pac-Lite This sight will not fit older "stepped" barrel height Pac-Lites (barrel is smaller diameter than receiver)Will also fit Ruger LITE onlyThis sight is TOO SHORT for other barrels on Ruger...

TacSol Tactical Solutions Pac-Lite Red HIGH .440" Fiber Optic Front Sight will fit Ruger Steel Bull type barrels

Tactical Solutions Front Sight HIGH (.440") fits FIRST Generation Pac-Lite with step from receiver to barrel.Will also fit Ruger Bull, Slab Side and Fluted STEEL BARRELS This sight will not fit newer same barrel height Pac-Lites (barrel is same diameter...

TacSol Tactical Solutions Pac-Lite Green HIGH .440" Fiber Optic Front Sight will fit Ruger Steel Bull type barrels

Tactical Solutions Front Sight HIGH (.440") fits FIRST Generation Pac-Lite with step from receiver to barrel.Will also fit Ruger Bull, Slab Side and Fluted STEEL BARRELS This sight will not fit newer same barrel height Pac-Lites (barrel is same diameter...

TruGlo Red Fiber Optic Front Sight for Ruger Mark Pistols and Browning Buck Mark

Fits most RUGER® MKII™, MKIII™, 22/45 and BROWNING® BUCK MARK® Rimfire Pistols This is for standard Bull Barrels only, will NOT fit Aluminum 1" diameter uppersWill also fit Buck Mark Bull barrelsReplaces existing front sightExtremely bright in...

TruGlo Green Fiber Optic Front Sight for Ruger Mark Pistols and Browning Buck Mark

Fits most RUGER® MKII™, MKIII™, 22/45 and BROWNING® BUCK MARK® Rimfire Pistols This is for standard Bull Barrels only, will NOT fit Aluminum 1" diameter uppersWill also fit Buck Mark Bull barrelsReplaces existing front sightExtremely bright in...

USED Factory Ruger Silver Weaver Rail for ALL Factory Drilled/Tapped Mark 1 2 3 4 IV Pistols, 22/45 and Tac-Sol Pac-Lite (Pac-Lite needs different screws) 90224

Ruger Weaver Rail for ALL Mark Series PistolsWorks on FACTORY-DRILLED Mark Series Pistols.Same rail that shipped with most Ruger Mark 3 Stainless Pistols-4.69" long-black aluminum3 screws included**6-48 threads are for FACTORY RUGER, check your thread...