Quick view Details Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* MSRP: Now: $6.25 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver MSRP: Now: $89.99 Get Notified Compare Quick view Details Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE MSRP: Now: $12.15 Add to Cart Compare Quick view Details Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB MSRP: Now: $11.70 Add to Cart Compare Quick view Details Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle MSRP: Now: $13.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel MSRP: Now: $84.99 Add to Cart Compare Quick view Details Ruger | sku: R-0-CF-R Ruger Chamber Flag RED MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $139.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol MSRP: Now: $12.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off MSRP: Now: $84.99 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring MSRP: Now: $9.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $14.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 MSRP: Now: $119.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 MSRP: Now: $24.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 MSRP: Now: $83.99 Add to Cart Compare Quick view Details Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE MSRP: Now: $361.00 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 MSRP: Now: $99.99 Get Notified Compare Quick view Details Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 MSRP: Now: $404.00 Add to Cart Compare Quick view Details Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 MSRP: Now: $1.59 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $144.99 Get Notified Compare SALE Quick view Details Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CH-BARE-S Factory Ruger 22 CHARGER Receiver BARE "Stainless" (Aluminum) (SAME as 10/22 but can be built as pistol OR Rifle) 4919 MSRP: Now: $164.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver MSRP: Now: $89.99 Get Notified Compare Quick view Details Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE MSRP: Now: $12.15 Add to Cart Compare Quick view Details Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB MSRP: Now: $11.70 Add to Cart Compare Quick view Details Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle MSRP: Now: $13.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel MSRP: Now: $84.99 Add to Cart Compare Quick view Details Ruger | sku: R-0-CF-R Ruger Chamber Flag RED MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $139.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol MSRP: Now: $12.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off MSRP: Now: $84.99 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring MSRP: Now: $9.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $14.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 MSRP: Now: $119.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 MSRP: Now: $24.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 MSRP: Now: $83.99 Add to Cart Compare Quick view Details Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE MSRP: Now: $361.00 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 MSRP: Now: $99.99 Get Notified Compare Quick view Details Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 MSRP: Now: $404.00 Add to Cart Compare Quick view Details Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 MSRP: Now: $1.59 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $144.99 Get Notified Compare SALE Quick view Details Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CH-BARE-S Factory Ruger 22 CHARGER Receiver BARE "Stainless" (Aluminum) (SAME as 10/22 but can be built as pistol OR Rifle) 4919 MSRP: Now: $164.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver MSRP: Now: $89.99 Get Notified Compare Quick view Details Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE MSRP: Now: $12.15 Add to Cart Compare Quick view Details Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB MSRP: Now: $11.70 Add to Cart Compare Quick view Details Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle MSRP: Now: $13.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel MSRP: Now: $84.99 Add to Cart Compare Quick view Details Ruger | sku: R-0-CF-R Ruger Chamber Flag RED MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $139.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol MSRP: Now: $12.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off MSRP: Now: $84.99 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring MSRP: Now: $9.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $14.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 MSRP: Now: $119.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 MSRP: Now: $24.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 MSRP: Now: $83.99 Add to Cart Compare Quick view Details Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE MSRP: Now: $361.00 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 MSRP: Now: $99.99 Get Notified Compare Quick view Details Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 MSRP: Now: $404.00 Add to Cart Compare Quick view Details Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 MSRP: Now: $1.59 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $144.99 Get Notified Compare SALE Quick view Details Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CH-BARE-S Factory Ruger 22 CHARGER Receiver BARE "Stainless" (Aluminum) (SAME as 10/22 but can be built as pistol OR Rifle) 4919 MSRP: Now: $164.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE MSRP: Now: $12.15 Add to Cart Compare Quick view Details Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB MSRP: Now: $11.70 Add to Cart Compare Quick view Details Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle MSRP: Now: $13.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel MSRP: Now: $84.99 Add to Cart Compare Quick view Details Ruger | sku: R-0-CF-R Ruger Chamber Flag RED MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $139.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol MSRP: Now: $12.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off MSRP: Now: $84.99 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring MSRP: Now: $9.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $14.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 MSRP: Now: $119.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 MSRP: Now: $24.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 MSRP: Now: $83.99 Add to Cart Compare Quick view Details Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE MSRP: Now: $361.00 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 MSRP: Now: $99.99 Get Notified Compare Quick view Details Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 MSRP: Now: $404.00 Add to Cart Compare Quick view Details Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 MSRP: Now: $1.59 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $144.99 Get Notified Compare SALE Quick view Details Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CH-BARE-S Factory Ruger 22 CHARGER Receiver BARE "Stainless" (Aluminum) (SAME as 10/22 but can be built as pistol OR Rifle) 4919 MSRP: Now: $164.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE MSRP: Now: $12.15 Add to Cart Compare Quick view Details Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB MSRP: Now: $11.70 Add to Cart Compare Quick view Details Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle MSRP: Now: $13.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel MSRP: Now: $84.99 Add to Cart Compare Quick view Details Ruger | sku: R-0-CF-R Ruger Chamber Flag RED MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $139.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol MSRP: Now: $12.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off MSRP: Now: $84.99 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring MSRP: Now: $9.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $14.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 MSRP: Now: $119.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 MSRP: Now: $24.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 MSRP: Now: $83.99 Add to Cart Compare Quick view Details Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE MSRP: Now: $361.00 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 MSRP: Now: $99.99 Get Notified Compare Quick view Details Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 MSRP: Now: $404.00 Add to Cart Compare Quick view Details Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 MSRP: Now: $1.59 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $144.99 Get Notified Compare SALE Quick view Details Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CH-BARE-S Factory Ruger 22 CHARGER Receiver BARE "Stainless" (Aluminum) (SAME as 10/22 but can be built as pistol OR Rifle) 4919 MSRP: Now: $164.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB MSRP: Now: $11.70 Add to Cart Compare Quick view Details Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle MSRP: Now: $13.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel MSRP: Now: $84.99 Add to Cart Compare Quick view Details Ruger | sku: R-0-CF-R Ruger Chamber Flag RED MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $139.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol MSRP: Now: $12.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off MSRP: Now: $84.99 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring MSRP: Now: $9.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $14.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 MSRP: Now: $119.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 MSRP: Now: $24.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 MSRP: Now: $83.99 Add to Cart Compare Quick view Details Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE MSRP: Now: $361.00 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 MSRP: Now: $99.99 Get Notified Compare Quick view Details Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 MSRP: Now: $404.00 Add to Cart Compare Quick view Details Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 MSRP: Now: $1.59 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $144.99 Get Notified Compare SALE Quick view Details Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CH-BARE-S Factory Ruger 22 CHARGER Receiver BARE "Stainless" (Aluminum) (SAME as 10/22 but can be built as pistol OR Rifle) 4919 MSRP: Now: $164.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle MSRP: Now: $13.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel MSRP: Now: $84.99 Add to Cart Compare Quick view Details Ruger | sku: R-0-CF-R Ruger Chamber Flag RED MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $139.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol MSRP: Now: $12.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off MSRP: Now: $84.99 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring MSRP: Now: $9.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $14.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 MSRP: Now: $119.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 MSRP: Now: $24.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 MSRP: Now: $83.99 Add to Cart Compare Quick view Details Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE MSRP: Now: $361.00 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 MSRP: Now: $99.99 Get Notified Compare Quick view Details Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 MSRP: Now: $404.00 Add to Cart Compare Quick view Details Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 MSRP: Now: $1.59 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $144.99 Get Notified Compare SALE Quick view Details Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CH-BARE-S Factory Ruger 22 CHARGER Receiver BARE "Stainless" (Aluminum) (SAME as 10/22 but can be built as pistol OR Rifle) 4919 MSRP: Now: $164.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle MSRP: Now: $13.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel MSRP: Now: $84.99 Add to Cart Compare Quick view Details Ruger | sku: R-0-CF-R Ruger Chamber Flag RED MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $139.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol MSRP: Now: $12.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off MSRP: Now: $84.99 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring MSRP: Now: $9.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $14.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 MSRP: Now: $119.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 MSRP: Now: $24.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 MSRP: Now: $83.99 Add to Cart Compare Quick view Details Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE MSRP: Now: $361.00 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 MSRP: Now: $99.99 Get Notified Compare Quick view Details Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 MSRP: Now: $404.00 Add to Cart Compare Quick view Details Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 MSRP: Now: $1.59 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $144.99 Get Notified Compare SALE Quick view Details Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CH-BARE-S Factory Ruger 22 CHARGER Receiver BARE "Stainless" (Aluminum) (SAME as 10/22 but can be built as pistol OR Rifle) 4919 MSRP: Now: $164.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel MSRP: Now: $84.99 Add to Cart Compare Quick view Details Ruger | sku: R-0-CF-R Ruger Chamber Flag RED MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $139.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol MSRP: Now: $12.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off MSRP: Now: $84.99 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring MSRP: Now: $9.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $14.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 MSRP: Now: $119.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 MSRP: Now: $24.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 MSRP: Now: $83.99 Add to Cart Compare Quick view Details Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE MSRP: Now: $361.00 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 MSRP: Now: $99.99 Get Notified Compare Quick view Details Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 MSRP: Now: $404.00 Add to Cart Compare Quick view Details Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 MSRP: Now: $1.59 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $144.99 Get Notified Compare SALE Quick view Details Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CH-BARE-S Factory Ruger 22 CHARGER Receiver BARE "Stainless" (Aluminum) (SAME as 10/22 but can be built as pistol OR Rifle) 4919 MSRP: Now: $164.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Ruger | sku: R-0-CF-R Ruger Chamber Flag RED MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $139.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol MSRP: Now: $12.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off MSRP: Now: $84.99 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring MSRP: Now: $9.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $14.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 MSRP: Now: $119.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 MSRP: Now: $24.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 MSRP: Now: $83.99 Add to Cart Compare Quick view Details Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE MSRP: Now: $361.00 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 MSRP: Now: $99.99 Get Notified Compare Quick view Details Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 MSRP: Now: $404.00 Add to Cart Compare Quick view Details Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 MSRP: Now: $1.59 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $144.99 Get Notified Compare SALE Quick view Details Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CH-BARE-S Factory Ruger 22 CHARGER Receiver BARE "Stainless" (Aluminum) (SAME as 10/22 but can be built as pistol OR Rifle) 4919 MSRP: Now: $164.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $139.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol MSRP: Now: $12.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off MSRP: Now: $84.99 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring MSRP: Now: $9.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $14.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 MSRP: Now: $119.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 MSRP: Now: $24.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 MSRP: Now: $83.99 Add to Cart Compare Quick view Details Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE MSRP: Now: $361.00 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 MSRP: Now: $99.99 Get Notified Compare Quick view Details Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 MSRP: Now: $404.00 Add to Cart Compare Quick view Details Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 MSRP: Now: $1.59 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $144.99 Get Notified Compare SALE Quick view Details Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CH-BARE-S Factory Ruger 22 CHARGER Receiver BARE "Stainless" (Aluminum) (SAME as 10/22 but can be built as pistol OR Rifle) 4919 MSRP: Now: $164.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol MSRP: Now: $12.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off MSRP: Now: $84.99 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring MSRP: Now: $9.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $14.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 MSRP: Now: $119.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 MSRP: Now: $24.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 MSRP: Now: $83.99 Add to Cart Compare Quick view Details Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE MSRP: Now: $361.00 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 MSRP: Now: $99.99 Get Notified Compare Quick view Details Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 MSRP: Now: $404.00 Add to Cart Compare Quick view Details Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 MSRP: Now: $1.59 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $144.99 Get Notified Compare SALE Quick view Details Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CH-BARE-S Factory Ruger 22 CHARGER Receiver BARE "Stainless" (Aluminum) (SAME as 10/22 but can be built as pistol OR Rifle) 4919 MSRP: Now: $164.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol MSRP: Now: $12.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off MSRP: Now: $84.99 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring MSRP: Now: $9.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $14.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 MSRP: Now: $119.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 MSRP: Now: $24.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 MSRP: Now: $83.99 Add to Cart Compare Quick view Details Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE MSRP: Now: $361.00 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 MSRP: Now: $99.99 Get Notified Compare Quick view Details Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 MSRP: Now: $404.00 Add to Cart Compare Quick view Details Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 MSRP: Now: $1.59 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $144.99 Get Notified Compare SALE Quick view Details Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CH-BARE-S Factory Ruger 22 CHARGER Receiver BARE "Stainless" (Aluminum) (SAME as 10/22 but can be built as pistol OR Rifle) 4919 MSRP: Now: $164.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off MSRP: Now: $84.99 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring MSRP: Now: $9.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $14.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 MSRP: Now: $119.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 MSRP: Now: $24.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 MSRP: Now: $83.99 Add to Cart Compare Quick view Details Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE MSRP: Now: $361.00 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 MSRP: Now: $99.99 Get Notified Compare Quick view Details Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 MSRP: Now: $404.00 Add to Cart Compare Quick view Details Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 MSRP: Now: $1.59 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $144.99 Get Notified Compare SALE Quick view Details Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CH-BARE-S Factory Ruger 22 CHARGER Receiver BARE "Stainless" (Aluminum) (SAME as 10/22 but can be built as pistol OR Rifle) 4919 MSRP: Now: $164.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off MSRP: Now: $84.99 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring MSRP: Now: $9.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $14.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 MSRP: Now: $119.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 MSRP: Now: $24.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 MSRP: Now: $83.99 Add to Cart Compare Quick view Details Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE MSRP: Now: $361.00 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 MSRP: Now: $99.99 Get Notified Compare Quick view Details Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 MSRP: Now: $404.00 Add to Cart Compare Quick view Details Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 MSRP: Now: $1.59 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $144.99 Get Notified Compare SALE Quick view Details Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CH-BARE-S Factory Ruger 22 CHARGER Receiver BARE "Stainless" (Aluminum) (SAME as 10/22 but can be built as pistol OR Rifle) 4919 MSRP: Now: $164.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring MSRP: Now: $9.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $14.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 MSRP: Now: $119.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 MSRP: Now: $24.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 MSRP: Now: $83.99 Add to Cart Compare Quick view Details Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE MSRP: Now: $361.00 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 MSRP: Now: $99.99 Get Notified Compare Quick view Details Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 MSRP: Now: $404.00 Add to Cart Compare Quick view Details Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 MSRP: Now: $1.59 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $144.99 Get Notified Compare SALE Quick view Details Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CH-BARE-S Factory Ruger 22 CHARGER Receiver BARE "Stainless" (Aluminum) (SAME as 10/22 but can be built as pistol OR Rifle) 4919 MSRP: Now: $164.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $14.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 MSRP: Now: $119.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 MSRP: Now: $24.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 MSRP: Now: $83.99 Add to Cart Compare Quick view Details Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE MSRP: Now: $361.00 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 MSRP: Now: $99.99 Get Notified Compare Quick view Details Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 MSRP: Now: $404.00 Add to Cart Compare Quick view Details Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 MSRP: Now: $1.59 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $144.99 Get Notified Compare SALE Quick view Details Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CH-BARE-S Factory Ruger 22 CHARGER Receiver BARE "Stainless" (Aluminum) (SAME as 10/22 but can be built as pistol OR Rifle) 4919 MSRP: Now: $164.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 MSRP: Now: $119.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 MSRP: Now: $24.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 MSRP: Now: $83.99 Add to Cart Compare Quick view Details Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE MSRP: Now: $361.00 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 MSRP: Now: $99.99 Get Notified Compare Quick view Details Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 MSRP: Now: $404.00 Add to Cart Compare Quick view Details Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 MSRP: Now: $1.59 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $144.99 Get Notified Compare SALE Quick view Details Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CH-BARE-S Factory Ruger 22 CHARGER Receiver BARE "Stainless" (Aluminum) (SAME as 10/22 but can be built as pistol OR Rifle) 4919 MSRP: Now: $164.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 MSRP: Now: $24.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 MSRP: Now: $83.99 Add to Cart Compare Quick view Details Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE MSRP: Now: $361.00 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 MSRP: Now: $99.99 Get Notified Compare Quick view Details Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 MSRP: Now: $404.00 Add to Cart Compare Quick view Details Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 MSRP: Now: $1.59 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $144.99 Get Notified Compare SALE Quick view Details Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CH-BARE-S Factory Ruger 22 CHARGER Receiver BARE "Stainless" (Aluminum) (SAME as 10/22 but can be built as pistol OR Rifle) 4919 MSRP: Now: $164.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 MSRP: Now: $24.95 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 MSRP: Now: $83.99 Add to Cart Compare Quick view Details Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE MSRP: Now: $361.00 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 MSRP: Now: $99.99 Get Notified Compare Quick view Details Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 MSRP: Now: $404.00 Add to Cart Compare Quick view Details Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 MSRP: Now: $1.59 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $144.99 Get Notified Compare SALE Quick view Details Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CH-BARE-S Factory Ruger 22 CHARGER Receiver BARE "Stainless" (Aluminum) (SAME as 10/22 but can be built as pistol OR Rifle) 4919 MSRP: Now: $164.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 MSRP: Now: $83.99 Add to Cart Compare Quick view Details Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE MSRP: Now: $361.00 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 MSRP: Now: $99.99 Get Notified Compare Quick view Details Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 MSRP: Now: $404.00 Add to Cart Compare Quick view Details Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 MSRP: Now: $1.59 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $144.99 Get Notified Compare SALE Quick view Details Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CH-BARE-S Factory Ruger 22 CHARGER Receiver BARE "Stainless" (Aluminum) (SAME as 10/22 but can be built as pistol OR Rifle) 4919 MSRP: Now: $164.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 MSRP: Now: $83.99 Add to Cart Compare Quick view Details Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE MSRP: Now: $361.00 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 MSRP: Now: $99.99 Get Notified Compare Quick view Details Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 MSRP: Now: $404.00 Add to Cart Compare Quick view Details Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 MSRP: Now: $1.59 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $144.99 Get Notified Compare SALE Quick view Details Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CH-BARE-S Factory Ruger 22 CHARGER Receiver BARE "Stainless" (Aluminum) (SAME as 10/22 but can be built as pistol OR Rifle) 4919 MSRP: Now: $164.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 MSRP: Now: $83.99 Add to Cart Compare Quick view Details Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE MSRP: Now: $361.00 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 MSRP: Now: $99.99 Get Notified Compare Quick view Details Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 MSRP: Now: $404.00 Add to Cart Compare Quick view Details Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 MSRP: Now: $1.59 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $144.99 Get Notified Compare SALE Quick view Details Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CH-BARE-S Factory Ruger 22 CHARGER Receiver BARE "Stainless" (Aluminum) (SAME as 10/22 but can be built as pistol OR Rifle) 4919 MSRP: Now: $164.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE MSRP: Now: $361.00 Add to Cart Compare Quick view Details Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 MSRP: Now: $99.99 Get Notified Compare Quick view Details Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 MSRP: Now: $404.00 Add to Cart Compare Quick view Details Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 MSRP: Now: $1.59 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $144.99 Get Notified Compare SALE Quick view Details Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CH-BARE-S Factory Ruger 22 CHARGER Receiver BARE "Stainless" (Aluminum) (SAME as 10/22 but can be built as pistol OR Rifle) 4919 MSRP: Now: $164.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 MSRP: Now: $99.99 Get Notified Compare Quick view Details Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 MSRP: Now: $404.00 Add to Cart Compare Quick view Details Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 MSRP: Now: $1.59 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $144.99 Get Notified Compare SALE Quick view Details Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CH-BARE-S Factory Ruger 22 CHARGER Receiver BARE "Stainless" (Aluminum) (SAME as 10/22 but can be built as pistol OR Rifle) 4919 MSRP: Now: $164.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 MSRP: Now: $99.99 Get Notified Compare Quick view Details Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 MSRP: Now: $404.00 Add to Cart Compare Quick view Details Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 MSRP: Now: $1.59 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $144.99 Get Notified Compare SALE Quick view Details Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CH-BARE-S Factory Ruger 22 CHARGER Receiver BARE "Stainless" (Aluminum) (SAME as 10/22 but can be built as pistol OR Rifle) 4919 MSRP: Now: $164.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 MSRP: Now: $404.00 Add to Cart Compare Quick view Details Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 MSRP: Now: $1.59 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $144.99 Get Notified Compare SALE Quick view Details Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CH-BARE-S Factory Ruger 22 CHARGER Receiver BARE "Stainless" (Aluminum) (SAME as 10/22 but can be built as pistol OR Rifle) 4919 MSRP: Now: $164.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 MSRP: Now: $1.59 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $144.99 Get Notified Compare SALE Quick view Details Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CH-BARE-S Factory Ruger 22 CHARGER Receiver BARE "Stainless" (Aluminum) (SAME as 10/22 but can be built as pistol OR Rifle) 4919 MSRP: Now: $164.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) MSRP: Now: $144.99 Get Notified Compare SALE Quick view Details Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view Details GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CH-BARE-S Factory Ruger 22 CHARGER Receiver BARE "Stainless" (Aluminum) (SAME as 10/22 but can be built as pistol OR Rifle) 4919 MSRP: Now: $164.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
SALE Quick view Details Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare
Quick view Details GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones MSRP: Now: $18.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-REC-CH-BARE-S Factory Ruger 22 CHARGER Receiver BARE "Stainless" (Aluminum) (SAME as 10/22 but can be built as pistol OR Rifle) 4919 MSRP: Now: $164.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Ruger | sku: R-1022-REC-CH-BARE-S Factory Ruger 22 CHARGER Receiver BARE "Stainless" (Aluminum) (SAME as 10/22 but can be built as pistol OR Rifle) 4919 MSRP: Now: $164.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-7 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #7 MSRP: Now: $259.99 Add to Cart Compare Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Volquartsen | sku: VC10BLT-G Volquartsen CNC Machined GOLD Bolt for the Ruger 10/22 and Charger Pistol VC10BLT-G MSRP: Now: $257.00 Add to Cart Compare Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Volquartsen | sku: VC10TD Volquartsen Take Down (stock, takedown) Screw for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10TD MSRP: Now: $5.85 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Tactical Solutions | sku: TS-10PR TacSol Tactical Solutions Picatinny Rail 1022SR-STD for Ruger 10/22 MSRP: Now: $35.00 Add to Cart Compare Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Tactical Solutions | sku: TS-10BF TacSol Tactical Solutions Polyurethane Bolt Shock Buffer XRACC-BF for Ruger 10/22, Charger and TacSol X-Ring MSRP: Now: $8.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Ruger | sku: R-1022-GL3 Factory Ruger Gun Lock Bracket comes with some 10/22 rifles MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Ruger | sku: R-1022-BLTP-RS Ruger Firing Pin Rebound Spring for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
SALE Quick view Details Magpul | sku: MP-1022-X22-STK-GRAY Magpul 10/22 Takedown X-22 Backpacker Stock Gray MSRP: Was: $94.99 Now: $74.99 Add to Cart Compare
Quick view Details Ruger | sku: R-1022-STK-RWD-41275-4 Factory Ruger 75th Anniversary 10/22 hardwood Stock hardwood Model 41275 #4 MSRP: Now: $149.99 Get Notified Compare Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Tactical Solutions | sku: TS-10TP-MB TacSol X-Ring Ruger 10/22 REPLACEMENT .920" Diameter Thread Protector (End Cap) 1/2"x28 Matte Black MSRP: Now: $24.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Ruger | sku: R-1022-SGT-OR-90465 Factory Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 MSRP: Now: $19.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Ruger | sku: R-1022-SGT-FS-B Ruger Blued Scope Base Filler Screws for 10/22 and Charger MSRP: Now: $5.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Ruger | sku: R-1022-RECP-VBLKSCRW Ruger *Take Off* Screw for V-Block Barrel Clamp for 10/22 Rifle and Charger Pistol B-67 MSRP: Now: $5.99 Add to Cart Compare SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
SALE Quick view Details Ruger | sku: R-1022-REC-10-BARE-RW Factory Ruger 10/22 Black BARE Receiver WITH Factory Mounted Weaver Rail (shipped this way from Ruger) MSRP: Was: $129.99 Now: $89.99 Add to Cart Compare
Quick view Details Ruger | sku: R-1022-GL2 Factory Ruger Gun Lock comes with some 10/22 rifles to work with the steel bracket. MSRP: Now: $1.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Ruger | sku: R-1022-FS-90523 Ruger SHORT Stainless Flash Suppressor .818" dia. 1/2"x28 Threads MSRP: Now: $29.99 Add to Cart Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-16ST-BL-FO Factory 10/22 Ruger 16.125" Standard Taper Hammer Forged BLUED Barrel with FIBER OPTIC Sights MSRP: Now: $109.99 Get Notified Compare Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Magpul | sku: MP-1022-X22-HUNT-GRAY Magpul 10/22 Gray Hunter X-22 Stock MAG548-GRY MSRP: Now: $123.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Ruger | sku: R-1022-BRL-10TO-STB-18ST-SS-TH-PEEP-FH Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged STAINLESS Barrel WITH Rear Peep Sight Rail model 31260 Threaded 1/2x28 with Flash Hider MSRP: Now: $264.99 Get Notified Compare Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Details Ruger | sku: R-1022-STK-RWD-21138-M1-5 Factory Ruger 10/22 Stock M1 Carbine style hardwood TALO Model 21138 - 21102 #5 MSRP: Now: $259.99 Add to Cart Compare Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Ruger | sku: R-MK-BLT-EXTRSPG Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B* Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good... MSRP: Now: $6.25 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Ruger | sku: R-1022-RECP-B5 Ruger Receiver Cross Pin Set for 10/22 Rifle and Charger Pistol Two pins are required per rifle. Sold in packs of 2.Genuine Ruger Factory Accessory MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Ruger | sku: R-1022-REC-10-BARE Factory Ruger 10/22 Black BARE Receiver NEW Take Off Factory Ruger 10/22 BARE Receiver This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your Dealer MUST get a copy of their license to us,Our email Address is WIRTHWEINGUNS@GMAIL.COMWe prefer .jpg file but .pdf is... MSRP: Now: $89.99 Get Notified Compare Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Ruger | sku: R-MK-BLT-EXTR Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3 Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start... MSRP: Now: $5.99 Add to Cart Compare Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Volquartsen | sku: VC10EE-VC2EE Volquartsen Exact Edge Extractor for Ruger 10/22, Charger and ALL Mark 1, 2, 3, 4 Pistols VC10EE - VC2EE The VC10EE and the VC2EE are IDENTICAL KitsThe 10/22 and ALL Mark pistols use the same extractor and spring.The Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under... MSRP: Now: $12.15 Add to Cart Compare Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Volquartsen | sku: VC10RB Volquartsen Recoil Buffer *NEW VERSION* for 10/22 Rifle, Charger Pistol and 10/22 Magnum VC10RB VC10RB Drop-in polyurethane bolt stop pin eliminates the metal to metal contact between bolt and receiver and eliminates vibration caused by this. The recoil buffer also provides a remarkable difference in cycling noise. Replaces factory bolt stop pin... MSRP: Now: $11.70 Add to Cart Compare Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Volquartsen | sku: VC-WG-WW Volquartsen Compensator Wave (crush, lock, spring) Washer BRAND NEW Steel VOLQUARTSEN Wave washer for Compensators or any muzzle device that uses this type washer for 1/2"-28 threads. ONLY .009" THICK (when flat) .506 ID x .749 OD. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Ruger | sku: R-1022-SGTR-60030 Ruger Adjustable Rear Sight for 10/22 Rifle Ruger Adjustable Rear Sight for 10/22 Rifle with Factory Dovetail Cut in Barrel MSRP: Now: $13.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Ruger | sku: R-1022-BRL-10TO-STB-18ST-BL Factory 10/22 Ruger 18.5" Standard Taper Hammer Forged BLUED Barrel These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Blued Steel Barrel. Fits Ruger 10/22 Rifle and Ruger Charger Pistol. Standard Taper18.5" long.22LR caliber1:16" RH twist. MSRP: Now: $84.99 Add to Cart Compare Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Ruger | sku: R-0-CF-R Ruger Chamber Flag RED Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out. MSRP: Now: $1.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Ruger | sku: R-1022-REC-CHTD-BARE Factory Ruger 22 CHARGER TAKEDOWN Receiver BARE (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 Charger TAKEDOWN BARE Receiver A Charger receiver may be built as a RIFLE or a PISTOLA 10/22 receiver can ONLY be built as a RifleWe have TacSol Takedown Charger Barrels in stockWith the Takdown Feature on this receiver it will be a... MSRP: Now: $139.99 Get Notified Compare Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Ruger | sku: R-1022-STKP-B00024 Ruger Take Down (Stock, takedown) Screw for 10/22 and Charger Ruger Take Down (Stock) Screw fits All Factory Ruger Receivers and StocksSome "Takedown" Rifles and Chargers may use a different screw for the front forearm mounting. MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Ruger | sku: R-1022-RECP-VBLKST Ruger *Take Off* V-Block Wedge Barrel Clamp & Screws Set for 10/22 Rifle and Charger Pistol Genuine Ruger parts removed from NEW UNFIRED parted out 10/22 rifles and Charger pistols MSRP: Now: $12.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Ruger | sku: R-1022-TGP-B24 Ruger Disconnector - sear Spring for 10/22 and Charger B-24 Ruger Disconnector / sear Spring for 10/22 and Charger fits All Factory Ruger Trigger Assemblies MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Ruger | sku: R-1022-BLT-TOGR Ruger 10/22 Rifle or Charger Pistol Bolt and Guide Rod New Take Off NEW Take Off Ruger 10/22 Rifle or Charger Pistol Bolt and Charging Handle / Recoil Spring MSRP: Now: $84.99 Add to Cart Compare Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Tactical Solutions | sku: TS-10EXT TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to... MSRP: Now: $9.99 Get Notified Compare Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Ruger | sku: R-1022-SGT-OR-90465-TO Factory Take Off Ruger Black Picatinny Scope Rail for 10/22 and Charger 90465 Ruger Picatinny Rail for 10/22 Rifles and Charger Pistols(Removed from New Charger pistols that were parted out)Works on FACTORY-DRILLED 10/22's and Chargers.Will accept Weaver Rings and OpticsWill Accept items that say "Picatinny"4 screws includedUPC:... MSRP: Now: $14.95 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Ruger | sku: R-1022-REC-10-BARE-S-75 Factory Ruger 10/22 75th Anniversary Silver BARE Receiver 41275 NEW Take Off Factory Ruger 10/22 BARE Receiver from 75th Anniversary Rifle Model 41275A 10/22 receiver can ONLY be built as a Rifle Ruger's "Stainless" 10/22 Rifles use a Clear Coated Aluminum ReceiverRuger has NEVER made a steel 10/22 receiver of ANY... MSRP: Now: $119.99 Add to Cart Compare Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Ruger | sku: R-1022-SGT-FSA-B Ruger Blued Scope Base Filler HEX Allen Screws for 10/22 and Charger *D12 Ruger Blued Scope Base Filler Allen Screws fits All Factory Drilled Ruger 10/22 and Charger receivers MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Ruger | sku: R-1022-TGPMR-90598 Ruger Extended Magazine Release Black Synthetic for 10/22 and Charger 90598 Magazine Latch 90598 fits All Factory Ruger Trigger GroupsThis 10/22 Extended Magazine Release is manufactured from the same rugged, heat-stabilized, glass-filled, polymer material as the trigger housing. It is compatible with all 10/22 autoloading rifle... MSRP: Now: $24.95 Add to Cart Compare Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Ruger | sku: R-1022-BLTP-FP Ruger Firing Pin for 10/22 and Charger Factory Ruger Firing Pin fits All Factory Ruger 10/22 and Charger Bolts MSRP: Now: $5.99 Add to Cart Compare Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view GUNSMITHER | sku: GST-BB Gunsmither 10/22 Bolt Bar for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to hook the Extractor Plunger and hold it BACK so you can easily remove extractor.Use it to easily push back and hold Recoil Rod Assembly to... MSRP: Now: $18.99 Add to Cart Compare Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view GSG | sku: GSG-1022-110 GSG 110 round Rotary Drum Magazine h GERMR110TEN22 German Sport Gun 110-round rotary drum magazine for Ruger 10/22 rifles.Made in Germany GERMR110TEN22By purchasing this 15 round magazine "YOU" are responsible for legalities in your location.DO NOT ORDER THIS PRODUCT if you live in these locations.The... MSRP: Now: $83.99 Add to Cart Compare Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Volquartsen | sku: VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Carbon Fiber Barrel with BLACK Ends VCTDLW-BE Volquartsen 10/22 TAKEDOWN Lightweight Barrel with BLACK Ends Designed for superior accuracy and performance with a lightweight carbon fiber design in a drop-in package! For TAKEDOWN 10/22 rifles ONLY. - .920" - 1/2" x 28 Threads- 1:16 Twist - ... MSRP: Now: $361.00 Add to Cart Compare Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Ruger | sku: R-1022-TGP-B35 Ruger Magazine Latch & Ejector Pin Set for 10/22 and Charger Ruger Magazine Latch & Ejector Pin Set fits All Factory Ruger Trigger Groups including BX MSRP: Now: $5.99 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Ruger | sku: R-1022-REC-10-BARE-31191 TAKE-OFF Factory Ruger Collector's Series 10/22 Black BARE Receiver, from model 31191 Factory model 31191 Fifth Edition Collector's Series Ruger 10/22 Black BARE ReceiverThese are Take-off receivers from NEW 31191 Ruger 10/22 rifles and feature the Collector's Series RCS#-##### serial number. Does NOT come with the peep sight rail, that... MSRP: Now: $99.99 Get Notified Compare Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Volquartsen | sku: VC10LCF-002 Volquartsen 10/22 Lightweight RED Carbon Fiber Barrel with Forward Blow Comp, VC10LCF-002 Volquartsen 10/22 Lightweight Red Carbon Fiber Barrel with Forward Blow Compensator This is a stainless steel barrel fitted with a woven carbon fiber tube. The air space between the tube and the barrel allows the barrel to stay cool under rapid-fire... MSRP: Now: $404.00 Add to Cart Compare Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Ruger | sku: R-MK-SIGHTR-WSCW Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13 Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads MSRP: Now: $1.59 Add to Cart Compare Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
Quick view Ruger | sku: R-1022-REC-CHTD-PIC Factory Ruger 22 CHARGER Takedown Receiver with Picatinny Rail Factory Mounted (SAME as 10/22 but can be built as pistol OR Rifle) NEW Take Off Ruger 22 CHARGER Takedown Receiver from NEW parted out 22 Charger Pistols (SAME as 10/22 but can be built as pistol OR Rifle)With Picatinny Rail Factory Mounted This is an FFL item***We DO NOT Hunt down FFL's without charging for it***Your... MSRP: Now: $144.99 Get Notified Compare SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view
SALE Quick view Ruger | sku: R-1022-BRL-10TO-TD-16ST-CK-TH-FO Factory Ruger 10/22 TAKEDOWN 16.4" Standard Taper Hammer Forged Dark Earth Cerakote Barrel Threaded 1/2x28 Model 31124 TAKEDOWN BARREL These are new from parted out unfired (other than at factory for proof) 10/22 Ruger riflesGenuine Ruger Cold Hammer Forged Stainless Steel Barrel. Fits Ruger TAKEDOWN 10/22 Rifle and Ruger Charger Pistol. Standard Taper16.4" longThreaded... MSRP: Was: $189.99 Now: $169.99 Add to Cart Compare
Quick view GUNSMITHER | sku: WG-GST-STT Gunsmither 10/22 Safe-T Takedown Tool for Ruger 10/22 Rifle, Charger Pistol and most Clones If you have a 10/22 or Clone you NEED this tool! (SEE PICS)I have one in my range bag and in my tool box.Use it to cage the Safety Plunger and Spring when installing or removing SafetyUse it to push pins from Trigger assemblyUse it as an aid in... MSRP: Now: $18.99 Add to Cart Compare Quick view