Trigger Parts and Trigger Kits

Factory Ruger Sear Spring for Mark 1 2 3 Standard Frame (NOT 22/45) *A8

Factory Ruger Mark Series Pistol Sear Spring Mark 1, 2, 3 STANDARD FRAME NOT for any 22/45 or ANY Mark IV(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)It's a good idea to keep a few of these around to...

Factory Ruger Trigger Return Spring for Mark 1 2 3 4 Pistols *B20

Trigger Return Spring is same on all Ruger Mark series pistols 1, 2, 3, 4, 22/45, LITESome shooters cut rings off to reduce power to help in getting lighter trigger takeup. Nice to have a couple to experiment with. You can find the trigger return...

Gunsmither Pistol Pal Tool for Ruger Mark 1 2 3 both Standard and 22/45 Pistols

If you have a Ruger Mark 1, 2 or 3 you NEED this tool! (SEE PICS)For Mark 4 this tool is only useful for removing Extractor from BoltI have one in my range bag and in my tool box.Use it to hook the Mainspring Latch Lever so you can unlock itUse it to...

Volquartsen Target Sear for Ruger Mark 1, 2, 3 VC2TS

Fits Ruger Mark 1, 2, 3 and 22/45 Mark 2, 3 and Mark 3 LITEThis specially designed sear provides the shooter with a shorter, faster, cleaner breaking trigger pull. The sear is wire EDM-cut from hardened A2 tool steel.   Part # VC2TS UPC 810162011680

Factory Ruger Stainless Sear Pivot Pin for Mark Series 1 2 3 4 IV Pistols (NOT 22/45) *A7

Factory Ruger Stainless Sear Pivot Pin for Mark Series 1, 2 and 3 PistolsThis is the same pin used for Mark 1 & 2 Standard Frame Magazine Latch. It can get lost and in extreme cases can be worn down. Same part as the Magazine Latch Pin. NOT FOR ANY...

Factory Ruger 22/45 Mark 2, 3 Pistol Sear Spring *F20*

Factory Ruger 22/45 Mark Series 2, 3 Pistol Sear SpringNOT for any Standard Frame or ANY Mark IV

Factory Ruger 22/45 Mark 2 3 4 (IV) & LITE Trigger Pivot Retainer *F4*

WILL NOT FIT ANYTHING BUT 22/45 PLASTIC Frames Trigger Pivot Pin Retainer Factory Ruger part Mark IV Part #4 in Exploded ViewMark 3 Part #30 in Exploded ViewMark 2 Green Circle in Exploded View

Volquartsen Hammer Bushing for Ruger Mark 1, 2, 3 and ALL 22/45 and LITE

This is the same bushing that comes in ALL Volquartsen Accurizing KitsAlthough it can be used with a Factory Ruger MK3 hammer it is NOT advised by Volquartsen (but we have done it ;)I do not know how it would work with a Factory Ruger MK4 hammer so,...

Factory Ruger Trigger Return Spring Plunger for Mark 1 2 3 4 Pistols *B21

The trigger spring plunger is same on all Ruger Mark series pistols 1, 2, 3, 4, 22/45, LITEThese can get lost pretty quick when taking a Mark apart.You can find the trigger return spring is here

Volquartsen Ruger Mark 1, 2, 3, 4 ALL 22/45 and LITE Target Trigger BLACK

Fits Mark 1, 2, 3, 4 All 22/45 All LITECNC-machined Target Trigger features both pretravel and overtravel adjustments. Made of Aluminum Other trigger colors here UPC: 810162011475Model: VC2TT

Stainless Trigger Pivot Pin RETAINER Fits Ruger A-54 and A-100 frames Mark 1 and Volquartsen Aluminum Mark 3 Frames *B16

Trigger Pivot Pin Retainer Fits Ruger Mark 1 A-54 and A-100 frames, as well as Volquartsen Aluminum Mark 3 framesMark 2 and 3 Ruger frames use a wire spring type retainer but this can be used in its place on steel frames.22/45 needs the wire retainer to...

Volquartsen Accurizing Kit Fits Mark 1 2 3 Black Trigger (Scorpion)

THIS is the kit you want for your Mark 3 to remove Magazine safety. Complete drop-in kit comes complete with:-Target Hammer-Target Sear-Target Trigger (available in a variety of colors)-Extended Bolt Release-Trigger Return Spring with...

Volquartsen Hammer and Bushing for Ruger Mark 1, 2, 3 and ALL 22/45 and LITE **READ DESCRIPTION**

This is the same Hammer and Bushing that comes in ALL MK2 and MK4 Volquartsen Accurizing KitsThis kit will work in ALL MK1, MK2, MK3 and MK4 (see notes below) Ruger Pistols (Very early MK1 may vary)You MUST have the COMPLETE "Accurizing" or...

Factory Ruger Blued Trigger Pivot Pin for Mark 2, 3, 4 (IV) Standard Frames *A22

Factory Ruger Blued Trigger Pivot Pin (STAINLESS pin here)ONLY FITS STANDARD Frames in Mark 2, 3 and 4 Can also fit Mark 1 frames if both holes are same size. (smaller hole can be drilled size of larger hole to make work)NOT for any 22/45 Part Number:...

Factory Ruger Sear Spring Stop Pin for Mark Series 1 2 3 Pistols (NOT 22/45) *A18

Factory Ruger Sear Spring Stop Pin for Mark Series 1, 2 and 3 PistolsThis is the same pin used for Mark 1 & 2 Standard Frame Magazine Latch NOT FOR ANY 22/45 or LITETHESE MAY BE BLUED OR STAINLESSNO CHOICEDEPENDS ON WHAT THEY SHIP US Part Number: A02603,...

Volquartsen Ruger Mark 1, 2, 3, 4 ALL 22/45 and LITE Target Trigger STAINLESS

Fits Mark 1, 2, 3, 4 All 22/45 All LITECNC-machined Target Trigger features both pretravel and overtravel adjustments. Made of Aluminum Other trigger colors here UPC: 810162012441Model: VC2TT-ST

Volquartsen Pistol Competition Kit for Ruger Mark 1, 2, 3 Stainless Trigger (Scorpion) VC2PCK-S-ST

Trying to figure out which parts are needed to take the Ruger MKII, MKIII and 22/45 to the next level? Look no further than the Pistol Competition Kit. This kit includes: -Accurizing Kit-Bolt Tune-Up Kit-CNC-Machined Disconnector. The Pistol Competition...

Volquartsen Pistol Competition Kit for Mark 1, 2, 3 Black Trigger (Scorpion) VC2PCK-B

Trying to figure out which parts are needed to take the Ruger MKII, MKIII and 22/45 to the next level? Look no further than the Pistol Competition Kit. This kit includes: -Accurizing Kit-Bolt Tune-Up Kit-CNC-Machined Disconnector. The Pistol Competition...

Volquartsen CNC-Machined Disconnector (trigger Bar) for MKII and MKIII - VC2DN

VC2DN CNC-Machined Disconnector is CNC-machined from 416 stainless steel. The machining process allows us to make several design changes to the the way the disconnector functions. We have added material that increases rigidity over the current design...

Volquartsen Accurizing Kit Fits Mark 1 2 3 Stainless Trigger VC2AK-S-ST

THIS is the kit you want for your Mark 3 to remove Magazine safety. Complete drop-in kit comes complete with:-Target Hammer-Target Sear-Target Trigger (available in a variety of colors)-Extended Bolt Release-Trigger Return Spring with...

Factory Ruger Hammer Pivot Pin Stainless for Mark 2, 3 (NOT 22/45) Pistols *A23

Hammer Pivot Pin Fits Ruger Mark Series 2 or 3This is the STAINLESS version, BLUED version is hereNOT FOR ANY 22/45 or any MARK 4These can provide contrast when mixing stainless in a blued frame.Part Number: KA02605

Factory Ruger Hammer Pivot Pin Blued for Mark 2, 3 (NOT 22/45) Pistols *A24

Hammer Pivot Pin Fits Ruger Mark Series 2 or 3 This is the BLUED version, STAINLESS version is hereNOT FOR ANY 22/45 or any MARK 4These can provide contrast when mixing blued in a stainless frame.Part Number: A02605

Factory Ruger Black Trigger for Mark 1 2 3 Pistols

These have the Tab on the back which was for Mark 3, some compliant thing for CA at one time I think (if you know more fill me in)That tab may need to be ground off in some installationsThis trigger is a bit different than Mark IV, have not tried to see...

Factory Ruger Trigger Pivot Retainer for Mark 2, 3 Standard Frames *B23*

Factory Ruger Trigger Pivot Pin RetainerONLY FITS Mark 2 and 3 Standard Frame Pistols. These tend to get damaged with improper disassembly.Does NOT fit ANY 22/45Part Number: KA04200

Factory Ruger STAINLESS Trigger Pivot Pin for Mark 2, 3, 4 (IV) Standard Frames *A21

Factory Ruger STAINLESS Trigger Pivot Pin (BLUED pin here)ONLY FITS STANDARD Frames in Mark 2, 3 and 4 Can also fit Mark 1 frames if both holes are same size. (smaller hole can be drilled size of larger hole to make work)NOT for any 22/45 Part Number:...

Trigger Pivot Pin RETAINER Fits Ruger A-54 and A-100 frames Mark 1 ONLY! *B17

Trigger Pivot Pin Retainer Fits Ruger Mark 1 A-54 and A-100 frames, as well as Volquartsen Aluminum Mark 3 framesMark 2 and 3 Ruger frames use a wire spring type retainer but this can be used in its place on steel frames.22/45 needs the wire retainer to...

Factory Ruger Hammer Strut Pin for Mark 1 & 2 Pistols and MK2 22/45 *A14B

Factory Ruger Hammer Strut Pin Fits Mark Series 1 and 2 Pistols and 22/45 Mark 2. This pin is for Mark 1, 2 series only BUT is the same pin as Mark 3 only LONGER. The MK3 hammer is thinner in this area due to the magazine disconnect. These are "staked"...

Volquartsen Accurizing Kit Fits Mark 1 2 3 GOLD Trigger (Scorpion)

THIS is the kit you want for your Mark 3 to remove Magazine safety. Complete drop-in kit comes complete with:-Target Hammer-Target Sear-Target Trigger (available in a variety of colors)-Extended Bolt Release-Trigger Return Spring with...

Volquartsen Pistol Competition Kit for Ruger Mark 1, 2, 3 ROSE GOLD Trigger (Scorpion) VC2PCK-RGT

Trying to figure out which parts are needed to take the Ruger MKII, MKIII and 22/45 to the next level? Look no further than the Pistol Competition Kit. This kit includes: -Accurizing Kit-Bolt Tune-Up Kit-CNC-Machined Disconnector. The Pistol Competition...

Volquartsen Pistol Competition Kit for Ruger Mark 1, 2, 3 GOLD Trigger (Scorpion) VC2PCK-GT

Trying to figure out which parts are needed to take the Ruger MKII, MKIII and 22/45 to the next level? Look no further than the Pistol Competition Kit. This kit includes: -Accurizing Kit-Bolt Tune-Up Kit-CNC-Machined Disconnector. The Pistol Competition...

Volquartsen Accurizing Kit Fits Mark 1 2 3 ROSE GOLD Trigger (Scorpion) VC2AK-RGT

THIS is the kit you want for your Mark 3 to remove Magazine safety. Complete drop-in kit comes complete with:-Target Hammer-Target Sear-Target Trigger (available in a variety of colors)-Extended Bolt Release-Trigger Return Spring with...

Factory Ruger Mark 1, 2 Target Trigger Overtravel Screw *B3

This is for the Mark 1 and 2 Pistols that came with a "Target Trigger"Pretty sure no Mark 3 ever came with this trigger and its not for Mark 4This is hidden in the Top Front of the trigger, you must remove trigger to adjust it and most likely to even see...

Factory Ruger Hammer Strut for Mark Series 1, 2, 3 and MK 2 3 22/45 Pistols *A17

Factory Ruger Hammer Strut for ALL Mark 1, 2 and 3 Pistols including 22/45 versionsNOT FOR ANY MARK 4 PISTOLSPart Number: A01000

Factory Ruger Disconnector (trigger Bar) for Mark 1, 2, 3 Pistols also MK 2 3 22/45

Disconnector Fits Ruger Mark Series 1, 2 or 3 and 22/45 and MK3 LITE Pistols. NOT FOR MARK 4

Volquartsen Ruger Mark 1, 2, 3, 4 ALL 22/45 and LITE Target Trigger GOLD

Fits Mark 1, 2, 3, 4 All 22/45 All LITECNC-machined Target Trigger features both pretravel and overtravel adjustments. Made of Aluminum Other trigger colors here UPC: 810162019549Model: VC2TT-GT