Magazines and Magazine Parts

Volquartsen SureFeed Magazine Follower Spring for Ruger Mark III and IV 5 PACK VC4FS-5

The SureFeed Magazine Follower Spring for the Ruger MKIII and MK IV is 25% stronger than the factory spring. The increased spring rate improves feeding in all Ruger MKIII and MK IV magazines. The SureFeed Magazine Follower Spring will eliminate feeding...

Ruger NICKEL 90229 Magazine for Mark 3 22/45

WILL NOT FIT MK-IV 22/45Factory Ruger 90229 10 round magazine is what Ruger shipped with new Mark 3 - 22/45 pistols.This magazine will also work in Mark 2 - 22/45 pistol. Click Here for our page on how to properly adjust your magazines to feed properly...

USED BLUED Ruger 90229 Magazine for 22/45 Mark 3

WILL NOT FIT MK-IV 22/45 UNLESS YOU TRIM OR CHANGE BASEI ALWAYS prefered the BLUED Mags over the Nickel Plated ones These have NOT been made in several years now CLEAN USED 90229 10 round magazines for 22/45 Mark 3 PistolsAlso fits 22/45 Mark 2These...

Ruger 90046 Magazine for Mark 2

WILL NOT FIT ANY 22/45Factory Ruger 90046 10 round magazine is what Ruger shiped with new Mark 2 Standard Frame pistols.This magazine will also work in Mark 1 pistols but is 10 rnd vs. 9 rnd.For older Mark 1 (right hand follower button) you will need...

Volquartsen Magazine Follower Button for Ruger Mark 1, 2, 3, 4 Pistols - 2 Pack NEW style

Have a sluggish MKII, MKIII, MK IV, or 22/45 Ruger magazine? Chances are the spring is fine but the actual culprit is the metal on metal contact of the magazine button. Not only does this make magazines hard to load but it can also cause feeding...

Ruger Magazine 90231, 90046, 90062 BASE BLOCK for Ruger Mark 2 3 4 IV Standard Frame Pistols (NOT 22/45)

WILL NOT FIT 22/45Factory Ruger 90231 Base BlockThis is the base that is used on 90231 and 90046 magazinesIt is also the same as what is used on 90062 only in BlackYou can use this to change your 90229 and 90599 magazines to fit Standard frames vs...

Ruger 22/45 Magazine BASE BLOCK for Ruger Mark 2, 3 (90229, 90045)

WILL NOT FIT STANDARD FRAMEFactory Ruger 90045 and 90229 Base BlockThis is the base that is used on 90045 and 90229 magazinesYou can use this to change your 90231 magazines to fit 22/45 Mark 2 and 3Click Here for our page on how to properly adjust your...

Volquartsen Magazine Follower Button for Ruger Mark 1, 2, 3, 4 Pistols - 10 Pack NEW style

Have a sluggish MKII, MKIII, MK IV, or 22/45 Ruger magazine? Chances are the spring is fine but the actual culprit is the metal on metal contact of the magazine button. Not only does this make magazines hard to load but it can also cause feeding...

Ruger Magazine Block Retaining Plunger for ALL Modern Ruger "Mark" Pistol Magazines 1 2 3 4 IV & all 22/45

This Plunger fits in ALL Mark series magazines with the plastic base pads (from factory)Will NOT fit old chrome base Mark 1 magazines.These can get shot into another dimension when disassembling a magazine. Click Here for our page on how to properly...

Ruger Magazine (90231, 90046, 90062) Silver Base Block for Ruger Mark 2 3 4 IV Standard Frame Pistols (NOT 22/45)

WILL NOT FIT 22/45Factory Ruger 90231 Base BlockThis is the base that is used on 90231 and 90046 magazines only in SilverIt is also the same as what is used on 90062You can use this to change your 90229 and 90599 magazines to fit Standard frames vs...

Ruger 9 round 90062 Magazine with SILVER Base for Mark 1

WILL NOT FIT 22/45Factory Ruger 90062 9 round magazine with SILVER BASEFor Mark 1 pistolsFor older Mark 1 (right hand follower button) you will need to swap the button to the right side. The follower can be swapped out to make it 10 round.The button...

Volquartsen SureFeed Magazine Follower Spring for Ruger Mark III and IV 2 PACK

The SureFeed Magazine Follower Spring for the Ruger MKIII and MK IV is 25% stronger than the factory spring. The increased spring rate improves feeding in all Ruger MKIII and MK IV magazines. The SureFeed Magazine Follower Spring will eliminate feeding...

Ruger Magazine Follower for ALL Modern Ruger "Mark" 10 rnd Pistol Magazines 1 2 3 4 IV & all 22/45

This Follower fits in ALL Mark series magazines with the plastic base pads (from factory) Will NOT fit old chrome base Mark 1 magazines. Click HERE for our page on how to properly adjust your magazines to feed properly *NO RUGER magazine comes from...

Ruger Magazine Spring for ALL Modern Ruger "Mark" Pistol magazines 1 2 3 4 IV & all 22/45

This spring fits in ALL Mark series magazines with the plastic base pads (from factory)Will NOT fir old chrome base Mark 1 magazines.Fresh spring can help feeding issues with full mags. Click Here for our page on how to properly adjust your magazines...

Volquartsen Magazine Follower Button for Ruger Mark 1, 2, 3, 4 Pistols - 10 Pack OLD style

Have a sluggish MKII, MKIII, MK IV, or 22/45 Ruger magazine? Chances are the spring is fine but the actual culprit is the metal on metal contact of the magazine button. Not only does this make magazines hard to load but it can also cause feeding...

Volquartsen Magazine Follower Button for Ruger Mark 1, 2, 3, 4 Pistols - 2 Pack OLD style

Have a sluggish MKII, MKIII, MK IV, or 22/45 Ruger magazine? Chances are the spring is fine but the actual culprit is the metal on metal contact of the magazine button. Not only does this make magazines hard to load but it can also cause feeding...

TacSol Tactical Solutions 10 rnd "Slam Mag" Magazine for Mark 2 3 4 22/45 Pistols PL-MKIV-MAG 90599

Tactical Solutions "Slam Mag" fits All Ruger Mark 2, 3 and 4 "22/45" models***WILL NOT FIT STANDARD FRAMES*** Impact resistant, Zytel extended length basepad aids in seating the magazine properly.

USED Ruger 10 round 90062* Magazine with SILVER Base for Mark 1

CLEAN USED 10 round magazines for Mark 1 pistolsThese magazines are 10 round and have the small magazine button that Ruger uses on the 90062 9 round Mark 1 magazineFor older Mark 1 (right hand follower button *A-54* Frame) you will need to swap the...

USED Ruger 90046 Magazine for Mark 2 with Silver Base

CLEAN USED 90046 10 round magazines for Mark 2 Standard frame pistols (NOT 22/45)These magazines are 10 round WILL NOT FIT ANY 22/45 or any Mark 3 or 4 Best if not used in Mark 1 as some may experience magazine button issues, although not commonWe...

USED Ruger 90046 Magazine for Mark 2

CLEAN USED 90046 10 round magazines for Mark 2 Standard frame pistols (NOT 22/45)These magazines are 10 round WILL NOT FIT ANY 22/45 or any Mark 3 or 4 Best if not used in Mark 1 as some may experience magazine button issues, although not commonWe...

Ruger 90045 Magazine for 22/45 Mark 2

Factory Ruger 90045 10 round magazine is what Ruger shipped with new 22/45 Mark 2 pistols.This magazine will work in Mark 3 with less drag since it has one less un-needed tooth on the top left front corner. It will work in Mark 4 with a base pad change...