Mark II

Factory Ruger Mark Series Pistol Rebound Spring Mark 1, 2, 3, 4 IV & All 22/45 *A6

Factory Ruger Rebound Spring (firing pin spring) fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)Have seen these mangled before but I think the firing pin was...

Volquartsen SureFeed Magazine Follower Spring for Ruger Mark III and IV 5 PACK VC4FS-5

The SureFeed Magazine Follower Spring for the Ruger MKIII and MK IV is 25% stronger than the factory spring. The increased spring rate improves feeding in all Ruger MKIII and MK IV magazines. The SureFeed Magazine Follower Spring will eliminate feeding...

Volquartsen VS3 Recoil Rod Spring and Assembly Kit for Ruger Mark 1, 2, 3, 4 and ALL 22/45 and LITE VC3RS

Recoil spring assembly is designed for a variety of pistols: Volquartsen: Scorpion, Mamba, Habu, Ruger: MKI, MKII, MKIII, MKIV and ALL Ruger 22/45And ALL TacSol Pac-LiteThis innovative design makes it quick and easy to match your spring weight to your...

Factory Ruger Rebound Spring Support for Mark 1 2 3 4 IV & All 22/45 Pistols *A5

Factory Ruger Rebound Spring Support (firing pin spring support) fits ALL Mark Series Pistols ever made**.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)This holds the rebound spring (firing pin spring)...

Ruger Blued Scope Base Filler HEX Allen Screws for Mark 1 2 3 4 IV & All 22/45 with Factory Drilled Holes *D12

Ruger Blued Scope Base Filler Allen Screws for Mark Series Pistols with Factory Drilled Holes6-48 NF

Factory Ruger Safety Detent Plunger for Mark 1 2 3 & 22/45 Mark 2 3 & Mark 3 LITE Pistols *B13

Factory Ruger Safety Detent Plunger Fits ALL Mark Series PRIOR Mark IV.(The very first 1949 - 1952 production years could differ, best to observe closely on these)These are THE most commonly lost part when taking the pistol apart. If your safety is not...

Factory Ruger Extractor Spring Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A1B*

Factory Ruger Extractor Spring fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's a good...

Factory Ruger Extractor Plunger Mark 1 2 3 4 IV & All 22/45 *A1

Factory Ruger Extractor Plunger fits MOST Mark Series Pistols ever made.(The early Mark 1 Bolts used a shorter plunger and this won't work in them)Part Number: A02501

Ruger Magazine 90231, 90046, 90062 BASE BLOCK for Ruger Mark 2 3 4 IV Standard Frame Pistols (NOT 22/45)

WILL NOT FIT 22/45Factory Ruger 90231 Base BlockThis is the base that is used on 90231 and 90046 magazinesIt is also the same as what is used on 90062 only in BlackYou can use this to change your 90229 and 90599 magazines to fit Standard frames vs...

Factory Ruger Grip Screws for Mark 1 2 3 4 IV (NOT 22/45) Pistols Standard Frame

WILL NOT FIT ANY 22/45 Factory Ruger Grip Screws fit Standard Frames Mark 1, 2, 3, 4These are 3/16" shank. These use 3/32" Allen Driver.

Volquartsen 22/45 Mainspring for Ruger Mark 2, 3 Pistols Black- VC3MSR-45-B

WILL NOT FIT ANY STANDARD FRAME(click here Mark 1, 2, 3 standard frame Volquartsen mainspring)Complete mainspring assembly designed for the Ruger MKII or MKIII. Mainspring components are wire EDM-cut and CNC-machined.Mainspring does not feature the lock...

Volquartsen Bolt Tune-up Kit for Ruger Mark 1, 2, 3, 4 and ALL 22/45 and LITE

Ruger Magazine Block Retaining Plunger for ALL Modern Ruger "Mark" Pistol Magazines 1 2 3 4 IV & all 22/45

This Plunger fits in ALL Mark series magazines with the plastic base pads (from factory)Will NOT fit old chrome base Mark 1 magazines.These can get shot into another dimension when disassembling a magazine. Click Here for our page on how to properly...

Ruger NICKEL 90229 Magazine for Mark 3 22/45

WILL NOT FIT MK-IV 22/45Factory Ruger 90229 10 round magazine is what Ruger shipped with new Mark 3 - 22/45 pistols.This magazine will also work in Mark 2 - 22/45 pistol. Click Here for our page on how to properly adjust your magazines to feed properly...

Factory Ruger Take Off Mark IV 4 Bolt *Stripped*

Factory Ruger Mark 4 Bolt removed from NEW unfired PistolsALL INTERNAL PARTS REMOVEDThese will work in Mark 2 pistols and in Mark 3 IF the LCI is removed

Volquartsen Magazine Follower Button for Ruger Mark 1, 2, 3, 4 Pistols - 10 Pack NEW style

Have a sluggish MKII, MKIII, MK IV, or 22/45 Ruger magazine? Chances are the spring is fine but the actual culprit is the metal on metal contact of the magazine button. Not only does this make magazines hard to load but it can also cause feeding...

TacSol Tactical Solutions Heavy Duty Ejector for Ruger Mark series pistols and Pac-Lite

Tactical Solutions HEAVY DUTY Ejector for Tac-Sol Pac-Lite AND ALL Mark Series Pistols (1, 2, 3, 4, 22/45, LITE) from 1949 till present. Replacement for factory ejector is precision machined from hardened 416 stainless steel billet for extra strength and...

Factory Ruger Reversible Picatinny Rail for ALL Factory Drilled/Tapped Mark 1 2 3 4 IV Pistols, 22/45 and Tac-Sol Pac-Lite (Pac-Lite needs different screws) 90623

Ruger Reversible Picatinny Rail for ALL Mark Series PistolsWorks on FACTORY-DRILLED Mark Series Pistols.Same rail that ships with Ruger Mark IV LITE and Tactical Series Pistols-reversible-4-3/8" long-black aluminum-3 screws included (6-48 threads)3...

Factory Ruger Bolt Stop Pivot Pin Stainless for Mark 1, 2, 3 Pistols also 22/45 MK 2 3 *B11

Bolt Stop Pivot Pin Fits Ruger Mark Series 1, 2 or 3 and 22/45 and MK3 LITE Pistols. NOT FOR MARK 4These pop out sometimes and get lost.Part Number: KA02602

Factory Ruger Bolt Stop Pin Blued for Mark 1, 2, 3 Pistols also MK 2 3 22/45 *B12

Factory Ruger Bolt Stop Pin in BluedFits Mark 1, 2 or 3 and 22/45 Mark 2, 3 and Mark 3 LITE Pistols. Not something commonly needed but can provide contrast when mixing stainless and blued (stainless version found HERE)NOT FOR MARK 4Part Number: A00100

Volquartsen Standard Mainspring for Ruger Mark 1, 2, 3 Pistols Black- VC3MSR-3-B

WILL NOT FIT ANY 22/45 FRAME(click here Mark II, III 22/45 frame Volquartsen mainspring)Complete mainspring assembly designed for the Ruger MKII or MKIII. Mainspring components are wire EDM-cut and CNC-machined.Mainspring does not feature the lock...

Volquartsen Hammer and Bushing for Ruger Mark 1, 2, 3 and ALL 22/45 and LITE **READ DESCRIPTION**

This is the same Hammer and Bushing that comes in ALL MK2 and MK4 Volquartsen Accurizing KitsThis kit will work in ALL MK1, MK2, MK3 and MK4 (see notes below) Ruger Pistols (Very early MK1 may vary)You MUST have the COMPLETE "Accurizing" or...

Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13

Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads

Factory Ruger Elevation Screw for Newer Version Mark IV Rear Sight J5

This is for the newer version Rear Sight that Ruger started using On Mark IV pistols in late 2018.SEE PICTURES FOR VERIFICATION

Ruger 90046 Magazine for Mark 2

WILL NOT FIT ANY 22/45Factory Ruger 90046 10 round magazine is what Ruger shiped with new Mark 2 Standard Frame pistols.This magazine will also work in Mark 1 pistols but is 10 rnd vs. 9 rnd.For older Mark 1 (right hand follower button) you will need...

Factory Ruger Take Off Mark IV 4 Bolt

Factory Ruger Mark 4 Bolt removed from NEW unfired PistolsIncludes;Recoil Spring AssemblyFiring Pin & Stop PinRebound Spring & SupportExtractor & Extractor Spring and PlungerThese will work in Mark 2 pistols and in Mark 3 IF the LCI is removed

Factory Ruger Take Off Mark IV 4 ALL BLACK Bolt

Factory Ruger Mark 4 Bolt removed from NEW unfired PistolsIncludes;Recoil Spring AssemblyFiring Pin & Stop PinRebound Spring & SupportExtractor & Extractor Spring and PlungerThese will work in Mark 2 pistols and in Mark 3 IF the LCI is removed

Volquartsen Mark 4 IV and Mark 2 DLC Black Competition Bolt (Mamba, Scorpion)- VC4BT-B

Fits ALL Mark 2 and ALL Mark 4 ALL Standard and 22/45 and LITE Will fit ALL Mark 3 if LCI is removed from receiver or replaced by a filler.Are you a competitive shooter looking to eliminate stovepipes, failures to fire and improve the overall performance...

Volquartsen Mark 2, 3, & 22/45 Extended Safety Stainless

Fits ALL Ruger Mark 2 and Mark 3 Pistols with STANDARD FRAMESFits 22/45 Mark 3 frames, DOES NOT FIT 22/45 MARK 2 FRAMESThe Extended Safety provides the shooter improved access to the safety on the Ruger MK2, MK3 and MK3 22/45 pistol. The ...

Volquartsen Accurizing Kit Fits Mark 1 2 3 Stainless Trigger (Scorpion)

THIS is the kit you want for your Mark 3 to remove Magazine safety. Complete drop-in kit comes complete with:-Target Hammer-Target Sear-Target Trigger (available in a variety of colors)-Extended Bolt Release-Trigger Return Spring with...

TacSol Tactical Solutions Extractor XRACC-EXT for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring

Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to...

Factory Ruger Front Sight for Ruger Mark 1 2 3 4 IV & All 22/45 Pistols with Bull, Slab or Fluted Barrels NOT the LITE *E24*

Fits ALL Ruger Mark Pistols with Bull, Slab or Fluted BarrelsThis is the latest version and is Aluminum with serrations on the back (eye side)WILL NOT FIT THE *LITE* (it's too tall)

Factory Ruger Bolt Stop Pin Stainless for Mark 1, 2, 3 Pistols also MK 2 3 22/45 *B6

Factory Ruger Bolt Stop Pin in Stainless Fits Mark 1, 2 or 3 and 22/45 Mark 2, 3 and Mark 3 LITE Pistols. Not something commonly needed but can provide contrast when mixing stainless and blued (blued version found HERE)NOT FOR MARK 4Part Number: KA00100

Factory Ruger Extractor Mark 1, 2, 3, 4 IV & All 22/45 and 10/22 Rifle *A3

Factory Ruger Extractor fits ALL Mark Series Pistols ever made.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)ALSO fits ALL 10/22 Rifles and ChargersIf you're having extraction issues, it's good to start...

Used Ruger Mark 3 Bolt

SEE ALL OF OUR PARTED OUT MARK 3 STUFF HERE!THIS IS A STOCK PHOTOExpect Average condition to good conditionI will not get into grading these, If it looks new it will be listed in a different listing If it looks rough it will be listed in a different...

Factory Ruger Take Off Mark IV 4 Stainless 75th ANNIVERSARY Bolt

75th ANNIVERSRY Factory Ruger Mark 4 Bolt removed from NEW unfired PistolsIncludes;Recoil Spring AssemblyFiring Pin & Stop PinRebound Spring & SupportExtractor & Extractor Spring and PlungerThese will work in Mark 2 pistols and in Mark 3 IF...

Ruger Mark 1 2 3 TacSol Tactical Solutions Upper Pac-Lite 6" NON-Fluted DARK OD Green 1/2"x28 threads

MARK 1-2-3 Pac-LitePac-Lite 6", 1/2"x28 threadsThis is a one-off color and we won't be getting more, if you like it, buy it! This is a VERY dark green, it almost looks black to very dark gray in typical indoor lighting and you can pick up the green...

Blued Front Sight Filler Screw for Pre October 2019 Mark 1 2 3 4 IV & All 22/45 with **6-40 Holes *E23

Blued Front Sight Filler Screw for Mark 1 2 3 4 IV & All 22/45 with **6-40 Holes6-40 NCIn October 2019 Ruger switched the old 6-40 front sight threads for 6-48This screw will not fit the newer pistols, will only fit the older ones.BE CAREFUL AND CHECK...

Volquartsen *GOLD* VC2BT-G Mark 4 IV and Mark 2 Competition Bolt (Mamba, Scorpion)

Fits ALL Mark 2 and ALL Mark 4 ALL Standard and 22/45 and LITEThis Titanium Nitride (TiN) PVD Coating offers the same benefits of the black DLC Will fit ALL Mark 3 if LCI is removed from receiver or replaced by a filler.Are you a competitive shooter...

Volquartsen Ruger Mark 3 Aluminum 1911 Style (22/45) Grip Frame (Lower) OD Green (Scorpion) VC45NF-OD

Volquartsen 1911 Style frame Same as the 22/45 Zytel (Polymer) Ruger frames only aluminum and MUCH BETTER!!Use this frame if you already shoot 1911 in something else.These will work with MK2 uppers also.These frames will accept Ruger, Tac-Sol and most...

Volquartsen Ruger Mark 2, 3 Aluminum Target Grip Frame (Lower) Black (Scorpion)- VC3NF-B

Volquartsen TARGET frame Same as the Standard steel Ruger frames only aluminum and MUCH BETTER!!These will work with MK2 uppers also.About 5 ounces lighter than the Ruger Steel Frame.These frames will accept Ruger, Tac-Sol and most likely AMT uppers.They...

Volquartsen Magazine Follower Button for Ruger Mark 1, 2, 3, 4 Pistols - 2 Pack NEW style

Have a sluggish MKII, MKIII, MK IV, or 22/45 Ruger magazine? Chances are the spring is fine but the actual culprit is the metal on metal contact of the magazine button. Not only does this make magazines hard to load but it can also cause feeding...

Volquartsen Target Sear for Ruger Mark 1, 2, 3 VC2TS

Fits Ruger Mark 1, 2, 3 and 22/45 Mark 2, 3 and Mark 3 LITEThis specially designed sear provides the shooter with a shorter, faster, cleaner breaking trigger pull. The sear is wire EDM-cut from hardened A2 tool steel.

Volquartsen Pistol Competition Kit for Mark 1, 2, 3 Black Trigger (Scorpion) VC2PCK-B

Trying to figure out which parts are needed to take the Ruger MKII, MKIII and 22/45 to the next level? Look no further than the Pistol Competition Kit. This kit includes: -Accurizing Kit-Bolt Tune-Up Kit-CNC-Machined Disconnector. The Pistol Competition...

Factory Ruger Sear Spring Stop Pin for Mark Series 1 2 3 Pistols (NOT 22/45) *A18

Factory Ruger Sear Spring Stop Pin for Mark Series 1, 2 and 3 PistolsThis is the same pin used for Mark 1 & 2 Standard Frame Magazine Latch NOT FOR ANY 22/45 or LITETHESE MAY BE BLUED OR STAINLESSNO CHOICEDEPENDS ON WHAT THEY SHIP US Part Number: A02603,...

Ruger Blued Scope Base Filler Screws for Mark 1 2 3 4 IV & All 22/45 with Factory Drilled Holes *E19

Ruger Blued Scope Base Filler Screws for Mark Series Pistols with Factory Drilled Holes6-48 NF

Factory Ruger front sight screw ALLEN HEAD *6-40* for PRE-OCT-2019 Ruger Mark 1 2 3 4 IV & All 22/45 (Except LITE) Pistols *E22

This is the newer Allen Driver type screw (6-40) for Front sights used on Mark Series Bull barrels.It is slightly longer than the old Flat Blade ScrewThese use 5/64" Allen Driver.In October 2019 Ruger changed front sight screw size in all of the steel...

Factory Ruger Front Sight Pin for Mark 1 2 3 4 IV & All 22/45 Pistols with STANDARD Taper Barrels *E15*

Factory Ruger Blued Front Sight Pin for the "Pencil Barrel" 4-3/4" and 6" barrels ONLY! These pistols typically have Non-Adjustable Rear sightNOT FOR "Heavy Taper" 5-1/4' and 6-7/8" barrels

Factory Ruger Sight Blade for Adjustable Handgun Sights .140" White Outline *D21

Fits ALL Ruger Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolRuger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above) .140" Blade with White...

Factory Ruger Mark 1 2 3 Mainspring Housing Detent Ball *B7

Factory Ruger Mainspring Housing Detent BallFits Mark Series 1, 2 or 3 Pistols Standard and 22/45If you ever have a pin come out of the mainspring housing or are replacing the mainspring, these can launch a long way into "Never find it Land"Part Number:...

Ruger Magazine Follower for ALL Modern Ruger "Mark" 10 rnd Pistol Magazines 1 2 3 4 IV & all 22/45

This Follower fits in ALL Mark series magazines with the plastic base pads (from factory) Will NOT fit old chrome base Mark 1 magazines. Click HERE for our page on how to properly adjust your magazines to feed properly *NO RUGER magazine comes from...

Factory RUGER Mark 2 Black Plastic Checkered Grips *RG2

Factory Ruger Mark II Black Plastic Checkered Grips Includes 4 grip screwsFits Mark II STANDARD Frame pistols, as well late Mark I (A-100) FramesWILL NOT FIT ANY 22/45 WILL NOT FIT EARLY MARK 1 "A-54" FRAMEModel: 19932UPC: 736676199327Looking for the...