Sights, Optics, Rails and Scope Rings

Ruger Blued Scope Base Filler HEX Allen Screws for Mark 1 2 3 4 IV & All 22/45 with Factory Drilled Holes *D12

Ruger Blued Scope Base Filler Allen Screws for Mark Series Pistols with Factory Drilled Holes6-48 NF

Ruger Mark IV Rear Sight Lock/Set Screws for all later MK 4, LITE & 22/45 *D5*

Ruger Mark IV Rear Sight Lock/Set Screws for all later MK 4, LITE & 22/4. These screws have a more aggressive tip and will hold much better than factory screws. SET OF 2 SCREWS. Fits ALL later Ruger Mark 4 with adjustable rear sight (SEE PICTURES)...

Factory Ruger Reversible Picatinny Rail for ALL Factory Drilled/Tapped Mark 1 2 3 4 IV Pistols, 22/45 and Tac-Sol Pac-Lite (Pac-Lite needs different screws) 90623

Ruger Reversible Picatinny Rail for ALL Mark Series PistolsWorks on FACTORY-DRILLED Mark Series Pistols.Same rail that ships with Ruger Mark IV LITE and Tactical Series Pistols-reversible-4-3/8" long-black aluminum-3 screws included (6-48 threads)3...

Factory Ruger NEWER Style Front Sight for Ruger Mark 1 2 3 4 IV & All 22/45 Pistols with Standard Thin Taper Barrels *E4

NEWER Style Factory Ruger Front Sight Blade for Standard thin-tapered barrelsFits NEWER Ruger Mark Pistols with "Old School" Thin Taper Barrels in 4-3/4" and 6" ONLY. These can be Mark 1, 2, 3 and 4 standard and 22/45 frames. The front sight on your...

Ruger Blued Scope Base Filler Screws for Mark 1 2 3 4 IV & All 22/45 with Factory Drilled Holes *E19

Ruger Blued Scope Base Filler Screws for Mark Series Pistols with Factory Drilled Holes6-48 NF

NEW VERSION Factory Ruger TAKE OFF Adjustable Rear Sight Black Outline for Mark 1 2 3 4 IV Pistols *D18*

REMOVED FROM NEW UNFIRED PISTOLSFits ALL Ruger Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolI think it's a decent upgrade over previous version,Serated finish on backTwo set screwsStraight blade screwdriver adjustment...

Blued Front Sight Filler Screw for Pre October 2019 Mark 1 2 3 4 IV & All 22/45 with **6-40 Holes *E23

Blued Front Sight Filler Screw for Mark 1 2 3 4 IV & All 22/45 with **6-40 Holes6-40 NCIn October 2019 Ruger switched the old 6-40 front sight threads for 6-48This screw will not fit the newer pistols, will only fit the older ones.BE CAREFUL AND CHECK...

Ruger Stainless Scope Base Filler Screws for Mark 1 2 3 4 IV & All 22/45 Pistols with Factory Drilled Holes *E20*

Ruger Stainless Scope Base Filler Screws for Mark Series Pistols with Factory Drilled Holes6-48 NF

Factory Ruger Front Sight for Ruger Mark 1 2 3 4 IV & All 22/45 Pistols with Bull, Slab or Fluted Barrels NOT the LITE *E24*

Fits ALL Ruger Mark Pistols with Bull, Slab or Fluted BarrelsThis is the latest version and is Aluminum with serrations on the back (eye side)WILL NOT FIT THE *LITE* (it's too tall)

HiViz Fiber Optic Ruger Mark Series, Single Six and Browning Buck Mark LiteWave Front Sight HRBLW01

Improve the performance of your handgun with the new Fiber Optic LITEWAVE® sight. Bright and ultra-durable LITEWAVE® sights will enhance your confidence and shooting experience.Fits;Ruger Mark Series Bull Barrel, Fluted and Slab SidesBuck Mark Bull...

New Factory Ruger Fixed Rear Sight for Mark 1 2 3 4 IV *D4*

Fits ALL Ruger Mark Series Pistols (see notes below)Very early "Standard" pistols had a narrower rear sight dovetail, it is obviously smaller than later models, no measuring should be required to verify if comparing any MK2, MK3 or MK4

Williams 602588 Adjustable Firesight Fiber Optic Sight Set for Ruger Mark 1 2 3 4 IV & All 22/45 Pistols with Bull, Slab or Fluted Barrels *NOT the LITE Models*

Fits ALL Ruger Mark 1, 2, 3, 4 Pistols with Bull, Slab or Fluted BarrelsThis is the latest version and is Aluminum with serrations on the back (eye side)WILL NOT FIT THE *LITE* (Front sight is too tall)

Factory Ruger Elevation Screw for Newer Version Mark IV Rear Sight J5

This is for the newer version Rear Sight that Ruger started using On Mark IV pistols in late 2018.SEE PICTURES FOR VERIFICATION

HiViz Ruger Mark Series 1 2 3 4 (IV), 22/45 and LITE Adjustable Fiber Optic Rear Sight MKAD211

Fits Ruger Mark I, II, III and IV pistols; 22/45 with adjustable rear sight including the 22/45 LITE.if your pistol did not come with Adjustable Rear Sight this will be TOO TALL for your Front Sight Early (1949-1951) Mark pistols had a narrow dovetail...

Factory Ruger Picatinny Base Screw for Ruger "LITE" Reversible Picatinny Rail *E17*

This is ONE single screw, buy as many as you need (only 3 are needed on a Mark Receiver) These use 3/32" Allen Driver.The "Reversible" picatinny rail used on the LITE from the factory uses a shorter screw than the standard old style Weaver rails. The old...

Ruger STAINLESS Scope Base Filler HEX Allen Screws for Mark 1 2 3 4 IV & All 22/45 with Factory Drilled Holes *D11

Ruger STAINLESS Scope Base Filler Allen Screws for Mark Series Pistols with Factory Drilled Holes6-48 NF

Factory Ruger Sight Elevator - Elevation Spring for Adjustable Handgun Sights *D10*

Fits ALL Ruger Adjustable Sight Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolRuger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above) This...

Factory Ruger Front Sight Pin for Mark 1 2 3 4 IV & All 22/45 Pistols with STANDARD Taper Barrels *E15*

Factory Ruger Blued Front Sight Pin for the "Pencil Barrel" 4-3/4" and 6" barrels ONLY! These pistols typically have Non-Adjustable Rear sightNOT FOR "Heavy Taper" 5-1/4' and 6-7/8" barrels

Slotted Factory Ruger front sight screw 6-40 threads for Ruger Mark 1 2 3 4 IV & All 22/45 (except LITE) Pistols *E12

This is the old Flat Blade Driver type screw for Front sights used on Mark Series Bull barrels.Ruger switched to slightly longer Allen screws in maybe 2017This is 6-40 threads, NEWER post October 2019 Mark IV STEEL barrels use a 6-48 screw so PAY...

Factory Ruger front sight screw ALLEN HEAD *6-40* for PRE-OCT-2019 Ruger Mark 1 2 3 4 IV & All 22/45 (Except LITE) Pistols *E22

This is the newer Allen Driver type screw (6-40) for Front sights used on Mark Series Bull barrels.It is slightly longer than the old Flat Blade ScrewThese use 5/64" Allen Driver.In October 2019 Ruger changed front sight screw size in all of the steel...

Slotted Factory Ruger Sight Elevator - Elevation Screw for Adjustable Handgun Sights *D9*

Fits ALL Ruger Adjustable Sight Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolRuger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above) This is...

Factory Ruger Sight Blade for Adjustable Handgun Sights .125" Black *D23

Fits ALL Ruger Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolRuger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above) .125" Blade with Black...

Factory Ruger Rear Sight ALLEN Lock Screw Mark 1 2 3 4 IV and 22/45 *D3*

Fits most Ruger Mark Series Pistols (see notes below)Ruger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above)Very early Adjustable sights were "MICRO" brand and I'm not sure...

Factory Ruger Sight Blade for Adjustable Handgun Sights .140" White Outline *D21

Fits ALL Ruger Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolRuger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above) .140" Blade with White...

Factory Ruger Front Sight Blade ONLY for 75TH Anniversary Pistol 6-7/8" Thin Taper Barrel *J16*

Factory Ruger ONLY for 75TH Anniversary Pistol 6-7/8" Thin Taper Barrel The front sight on your pistol should use a set SCREW (not pin). Please see all pictures before buying.

Volquartsen SILVER Dovetail Picatinny Rail Mount for ALL Mark 1 2 3 4

THESE ARE SILVERThese are LONG discontinued, we just ran across some more.The Volquartsen Dovetail Scope Mount converts the sight dovetail on a Ruger Mark 1, 2, 3, 4, all 22/45 and LITE Pistols to a Picatinny style mount. This mount is the perfect...

Williams 616319 Adjustable Firesight Fiber Optic Sight Set for Mark 1, 2, 3, 4 with HEAVY TAPERED Barrel

Fiber Optic Firesight for Mark II and IV pistols features a click adjustment design for windage and elevation adjustment, high visibility fiber optics for target shooting and hunting, and improved visibility in low light conditions. CNC machined out of...

TruGlo Green Fiber Optic Front Sight for Ruger Mark Pistols and Browning Buck Mark

Fits most RUGER® MKII™, MKIII™, 22/45 and BROWNING® BUCK MARK® Rimfire Pistols This is for standard Bull Barrels only, will NOT fit Aluminum 1" diameter uppersWill also fit Buck Mark Bull barrelsReplaces existing front sightExtremely bright in...

Custom Anodized Factory Ruger Reversible Picatinny Rail for ALL Factory Drilled/Tapped Mark 1 2 3 4 IV Pistols, 22/45 and Tac-Sol Pac-Lite in Matte Red

Ruger Reversible Picatinny Rail for ALL Mark Series PistolsWorks on FACTORY-DRILLED Mark Series Pistols.Same rail that ships with Ruger Mark IV LITE and Tactical Series Pistols-reversible-4-3/8" long-anodized aluminumThese are a special run of FACTORY...

Volquartsen Target Rear Sight for Mark 2, 3, 4 Series- VC2TL

Fits Ruger Mark Uppers (the sight for the LLV is here)Replacement Rear sight designed specifically for Mark 2, 3, and 4 uppers with 0.875" bull barrels. The sight for LLV is a little higher and will NOT work for these. Drop-in sights use existing...

Factory Ruger Tall Sight Blade for Adjustable Handgun Sights .140" High White Outline *D20

Fits ALL Ruger Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolRuger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above) .140" White Outline...

Factory Ruger Silver Weaver Rail for ALL Factory Drilled/Tapped Mark 1 2 3 4 IV Pistols, 22/45 and Tac-Sol Pac-Lite (Pac-Lite needs different screws) 90224

Ruger Weaver Rail for ALL Mark Series PistolsWorks on FACTORY-DRILLED Mark Series Pistols.Same rail that shipped with most Ruger Mark 3 Stainless Pistols-4.69" long-black aluminum3 screws included**6-48 threads are for FACTORY RUGER, check your thread...

Factory Ruger Black Weaver Rail for ALL Factory Drilled/Tapped Mark 1 2 3 4 IV Pistols, 22/45 and Tac-Sol Pac-Lite (Pac-Lite needs different screws) 90228

Ruger Weaver Rail for ALL Mark Series PistolsWorks on FACTORY-DRILLED Mark Series Pistols.Same rail that shipped with most Ruger Mark 3 Blued Pistols-4.69" long-black aluminum3 screws included**6-48 threads are for FACTORY RUGER, check your thread pitch...

Factory Ruger Sight Blade for Adjustable Handgun Sights .090" Black *D24*

Fits ALL Ruger Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolRuger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above) .090" Blade with Black...

C-More SlideRide Red Dot Poly Standard Switch Black (NO DOT MODULE SEE DESCRIPTION)

*****THIS PRICE IS WITH NO DOT MODULE*****To not VOID the Factory 1 Year Warranty (SEE BELOW) you must purchase the module below of your choice for us to install PRIOR shipping.C-More will service ALL of their products for minimal fee if you choose to...

NEWER Style Front Sight Blade SET SCREW for Ruger Mark 4 IV Pistols with Taper Barrels *E9*

This SET SCREW is for the NEWER Style Factory Ruger Front Sight Blade for Standard tapered barrels and the 75th Anniversary 40175 Model SEE PICTURES If you have an empty hole on the right side of your Front Sight, this is the set screw that goes in there...

TruGlo Red Fiber Optic Front Sight for Ruger Mark Pistols and Browning Buck Mark

Fits most RUGER® MKII™, MKIII™, 22/45 and BROWNING® BUCK MARK® Rimfire Pistols This is for standard Bull Barrels only, will NOT fit Aluminum 1" diameter uppersWill also fit Buck Mark Bull barrelsReplaces existing front sightExtremely bright in...

Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13

Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads

Factory Ruger Sight Blade for Adjustable Handgun Sights "V" White Post *D14*

Fits ALL Ruger Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolRuger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above)"V" Blade with White Post...

TacSol Tactical Solutions Pac-Lite Red LOW .365" Fiber Optic Front Sight will fit Ruger LITE

Tactical Solutions Front Sight LOW fits Current Generation Pac-Lite This sight will not fit older "stepped" barrel height Pac-Lites (barrel is smaller diameter than receiver)Will also fit Ruger LITE onlyThis sight is TOO SHORT for other barrels on Ruger...

Factory Ruger Elevation Spring for Newer Version Mark IV Rear Sight J6

This is for the newer version Rear Sight that Ruger started using On Mark IV pistols in late 2018.SEE PICTURES FOR VERIFICATION

Custom Anodized Factory Ruger Front Sight for Ruger Mark 1 2 3 4 IV & All 22/45 Pistols with Bull, Slab or Fluted Barrels, NOT the LITE- Matte Red

Fits ALL Ruger Mark Pistols with Bull, Slab or Fluted BarrelsThis is the latest version and is Aluminum with serrations on the back (eye side)These are a special run of FACTORY Ruger front sights that we had anodized in our custom colors.Check out our...

TacSol Tactical Solutions Pac-Lite Green LOW .365" Fiber Optic Front Sight will fit Ruger LITE

Tactical Solutions Front Sight LOW fits Current Generation Pac-Lite This sight will not fit older "stepped" barrel height Pac-Lites (barrel is smaller diameter than receiver)Will also fit Ruger LITE onlyThis sight is TOO SHORT for other barrels on Ruger...

TacSol Tactical Solutions Pac-Lite Red HIGH .440" Fiber Optic Front Sight will fit Ruger Steel Bull type barrels

Tactical Solutions Front Sight HIGH (.440") fits FIRST Generation Pac-Lite with step from receiver to barrel.Will also fit Ruger Bull, Slab Side and Fluted STEEL BARRELS This sight will not fit newer same barrel height Pac-Lites (barrel is same diameter...

Factory Ruger Sight Windage Spring for Adjustable Handgun Sights *D16*

Fits ALL Ruger Adjustable Sight Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolThis spring is also used on most Ruger Adjustable Sight RevolversThis should fit Pac-Lite rear sight alsoRuger Mark IV pistols from late 2018...

Factory Ruger Windage Screw for Adjustable Handgun Sights *D15*

Fits MOST Ruger Adjustable Sight Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolRuger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above)This is...

OBSOLETE Factory Ruger Rear Sight Pivot Pin for Mark 1 2 3 4 IV Pistols *D7*

Fits ALL Ruger Mark Series PistolsRuger "LITE" is still a Mark series pistol Ruger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above)If you have an OLD EARLY Mark 1 with the...

HiViz Front Sight for Ruger Mark Pistols with HEAVY Taper Barrels

This is an interchangeable style Ruger Mark Series HEAVY TAPER Barrel pistol sight. This is for HEAVY TAPER Barrels only, will NOT fit Standard Taper BarrelsIt includes six fiber optic family LitePipes, in various colors, a carrying case, and a key to...

C-More SlideRide Red Dot Poly Standard Switch RED (NO DOT MODULE SEE DESCRIPTION)

*****THIS PRICE IS WITH NO DOT MODULE*****To not VOID the Factory 1 Year Warranty (SEE BELOW) you must purchase the module below of your choice for us to install PRIOR shipping.C-More will service ALL of their products for minimal fee if you choose to...

Custom Anodized Factory Ruger Reversible Picatinny Rail for ALL Factory Drilled/Tapped Mark 1 2 3 4 IV Pistols, 22/45 and Tac-Sol Pac-Lite (Pac-Lite needs different screws) in Matte OD Green

Ruger Reversible Picatinny Rail for ALL Mark Series PistolsWorks on FACTORY-DRILLED Mark Series Pistols.Same rail that ships with Ruger Mark IV LITE and Tactical Series Pistols-reversible-4-3/8" long-anodized aluminumThese are a special run of FACTORY...

Volquartsen Target Front Sight for 6" LLV (Scorpion, Mamba) and LLV-4 VCSFS-6

ONLY FITS 6" LLV UPPER(here's the sight for the 4.5" upper)Replacement front sights designed specifically for either the Volquartsen Scorpion pistol or LLV Competition Upper. Drop-in sights use existing pre-drilled & tapped holes.Model:VCSFS-6UPC:...

Factory Ruger Windage Screw for Newer Version Mark IV Rear Sight J9

This is for the newer version Rear Sight that Ruger started using On Mark IV pistols in late 2018.SEE PICTURES FOR VERIFICATION