Mark II

Longer Allen Head Grip Screws for Ruger Mark 1 2 3 4 IV (NOT 22/45) Pistols Standard Frame

LONGER Blued Allen head Grip screws for Ruger Mark series STANDARD frame pistols. Fits Mark 1, 2, 3 and 4 standard frame. These use 7/64" Allen Driver. These screws are little longer than factory (1/4" shank vs. 3/16" shank) to accommodate various...

Volquartsen Mark 2, 3, & 22/45 Extended Safety Stainless

Fits ALL Ruger Mark 2 and Mark 3 Pistols with STANDARD FRAMESFits 22/45 Mark 3 frames, DOES NOT FIT 22/45 MARK 2 FRAMESThe Extended Safety provides the shooter improved access to the safety on the Ruger MK2, MK3 and MK3 22/45 pistol. The ...

Factory Ruger Picatinny Base Screw for Ruger "LITE" Reversible Picatinny Rail *E17*

This is ONE single screw, buy as many as you need (only 3 are needed on a Mark Receiver) These use 3/32" Allen Driver.The "Reversible" picatinny rail used on the LITE from the factory uses a shorter screw than the standard old style Weaver rails. The old...

HiViz Fiber Optic Ruger Mark Series, Single Six and Browning Buck Mark LiteWave Front Sight HRBLW01

Improve the performance of your handgun with the new Fiber Optic LITEWAVE® sight. Bright and ultra-durable LITEWAVE® sights will enhance your confidence and shooting experience.Fits;Ruger Mark Series Bull Barrel, Fluted and Slab SidesBuck Mark Bull...

Volquartsen Ruger Mark 1, 2, 3, 4 ALL 22/45 and LITE Target Trigger BLACK

Fits Mark 1, 2, 3, 4 All 22/45 All LITECNC-machined Target Trigger features both pretravel and overtravel adjustments. Made of Aluminum Other trigger colors here UPC: 810162011475Model: VC2TT

Panhead Allen Grip Screws for Ruger Mark 1 2 3 4 IV (NOT 22/45) Pistols Standard Frame

Panhead allenhead grip screws for Ruger Mark 1, 2, 3, 4 STANDARD framesWILL NOT FIT ANY 22/45 MarksPanhead Grip Screws nice rounded head with larger surface (Allen Head) for Ruger Standard Frames Mark 1, 2, 3, 4 These are 1/4" shank (the threaded part...

TacSol Tactical Solutions Extractor & Spring for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring

Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to...

Factory Ruger Sight Elevator - Elevation Spring for Adjustable Handgun Sights *D10*

Fits ALL Ruger Adjustable Sight Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolRuger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above) This...

Volquartsen Mark IV Magazine Base Pads 2 Pack- VFTB-2

These base pads provide more positive magazine insertion, easier removal, and lightning fast reloads. CNC-machined from billet aluminum These base pads fit both the Mamba-TF and Ruger MK IV magazines. These are the perfect complement to our target grips...

Factory Ruger Firing Pin Mark 4 IV *C1

Factory Ruger Mark IV 4 Firing PinWill fit anything** MARK, yes, even Mark I, II, III **however the very early years of production ('49-'52) could differ, so look closely to be certain if that is your case We have been solving some LIGHT STRIKE issues...

Ruger Magazine Follower for ALL Modern Ruger "Mark" 10 rnd Pistol Magazines 1 2 3 4 IV & all 22/45

This Follower fits in ALL Mark series magazines with the plastic base pads (from factory) Will NOT fit old chrome base Mark 1 magazines. Click HERE for our page on how to properly adjust your magazines to feed properly *NO RUGER magazine comes from...

Volquartsen 22/45 Mainspring for Ruger Mark 2, 3 Pistols Black- VC3MSR-45-B

WILL NOT FIT ANY STANDARD FRAME(Click Here for Mark 1, 2, 3 STANDARD frame Volquartsen mainspring)Complete mainspring assembly designed for the Ruger MKII or MKIII. Mainspring components are wire EDM-cut and CNC-machined.   Mainspring does not...

Slotted Factory Ruger front sight screw 6-40 threads for Ruger Mark 1 2 3 4 IV & All 22/45 (except LITE) Pistols *E12

This is the old Flat Blade Driver type screw for Front sights used on Mark Series Bull barrels.Ruger switched to slightly longer Allen screws in maybe 2017This is 6-40 threads, NEWER post October 2019 Mark IV STEEL barrels use a 6-48 screw so PAY...

Factory Ruger Elevation Screw for Newer Version Mark IV Rear Sight J5

This is for the newer version Rear Sight that Ruger started using On Mark IV pistols in late 2018.SEE PICTURES FOR VERIFICATION

Titanium Ruger Firing Pin Mark 1, 2, 3, 4 IV & All 22/45 *J20

Titanium Ruger Firing Pin fits ALL Mark Series Pistols ever made (including MK-IV)**.(**The very first 1949 - 1952 production years could differ, best to observe closely on these**)

HiViz Ruger Mark Series 1 2 3 4 (IV), 22/45 and LITE Adjustable Fiber Optic Rear Sight MKAD211

Fits Ruger Mark I, II, III and IV pistols; 22/45 with adjustable rear sight including the 22/45 LITE.if your pistol did not come with Adjustable Rear Sight this will be TOO TALL for your Front Sight Early (1949-1951) Mark pistols had a narrow dovetail...

Ruger STAINLESS Scope Base Filler HEX Allen Screws for Mark 1 2 3 4 IV & All 22/45 with Factory Drilled Holes *D11

Ruger STAINLESS Scope Base Filler Allen Screws for Mark Series Pistols with Factory Drilled Holes6-48 NF

Volquartsen Accurizing Kit Fits Mark 1 2 3 Black Trigger (Scorpion)

THIS is the kit you want for your Mark 3 to remove Magazine safety. Complete drop-in kit comes complete with:-Target Hammer-Target Sear-Target Trigger (available in a variety of colors)-Extended Bolt Release-Trigger Return Spring with...

Volquartsen Hammer and Bushing for Ruger Mark 1, 2, 3 and ALL 22/45 and LITE **READ DESCRIPTION**

This is the same Hammer and Bushing that comes in ALL MK2 and MK4 Volquartsen Accurizing KitsThis kit will work in ALL MK1, MK2, MK3 and MK4 (see notes below) Ruger Pistols (Very early MK1 may vary)You MUST have the COMPLETE "Accurizing" or...

Volquartsen Black Extended Magazine Release for Mark 1 and 2 VC2MR-B

Provides extended length over the factory magazine release for faster, easier magazine changes. It is designed to work with oversized target style grips. Drop-in part that requires no gunsmithing. Made of Blued SteelVolquartsen implies...

Factory Ruger Bolt Stop Pivot Pin Stainless for Mark 1, 2, 3 Pistols also 22/45 MK 2 3 *B11

Bolt Stop Pivot Pin Fits Ruger Mark Series 1, 2 or 3 and 22/45 and MK3 LITE Pistols. NOT FOR MARK 4These pop out sometimes and get lost.Part Number: KA02602

Factory RUGER Mark 2 Black Plastic Checkered Grips *RG2

Factory Ruger Mark II Black Plastic Checkered Grips Includes 4 grip screwsFits Mark II STANDARD Frame pistols, as well late Mark I (A-100) FramesWILL NOT FIT ANY 22/45 WILL NOT FIT EARLY MARK 1 "A-54" FRAMEModel: 19932UPC: 736676199327Looking for the...

Factory Ruger Blued Trigger Pivot Pin for Mark 2, 3, 4 (IV) Standard Frames *A22

Factory Ruger Blued Trigger Pivot Pin (STAINLESS pin here)ONLY FITS STANDARD Frames in Mark 2, 3 and 4 Can also fit Mark 1 frames if both holes are same size. (smaller hole can be drilled size of larger hole to make work)NOT for any 22/45 Part Number:...

Factory Ruger Bolt Stop Pin Blued for Mark 1, 2, 3 Pistols also MK 2 3 22/45 *B12

Factory Ruger Bolt Stop Pin in BluedFits Mark 1, 2 or 3 and 22/45 Mark 2, 3 and Mark 3 LITE Pistols. Not something commonly needed but can provide contrast when mixing stainless and blued (stainless version found HERE)NOT FOR MARK 4Part Number: A00100

Factory Ruger Front Sight Pin for Mark 1 2 3 4 IV & All 22/45 Pistols with STANDARD Taper Barrels *E15*

Factory Ruger Blued Front Sight Pin for the "Pencil Barrel" 4-3/4" and 6" barrels ONLY! These pistols typically have Non-Adjustable Rear sightNOT FOR "Heavy Taper" 5-1/4' and 6-7/8" barrels

Factory Ruger Sear Spring Stop Pin for Mark Series 1 2 3 Pistols (NOT 22/45) *A18

Factory Ruger Sear Spring Stop Pin for Mark Series 1, 2 and 3 PistolsThis is the same pin used for Mark 1 & 2 Standard Frame Magazine Latch NOT FOR ANY 22/45 or LITETHESE MAY BE BLUED OR STAINLESSNO CHOICEDEPENDS ON WHAT THEY SHIP US Part Number: A02603,...

Volquartsen Ruger Mark 1, 2, 3, 4 ALL 22/45 and LITE Target Trigger STAINLESS

Fits Mark 1, 2, 3, 4 All 22/45 All LITECNC-machined Target Trigger features both pretravel and overtravel adjustments. Made of Aluminum Other trigger colors here UPC: 810162012441Model: VC2TT-ST

Slotted Factory Ruger Sight Elevator - Elevation Screw for Adjustable Handgun Sights *D9*

Fits ALL Ruger Adjustable Sight Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolRuger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above) This is...

Factory Ruger Rear Sight ALLEN Lock Screw Mark 1 2 3 4 IV and 22/45 *D3*

Fits most Ruger Mark Series Pistols (see notes below)Ruger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above)Very early Adjustable sights were "MICRO" brand and I'm not sure...

Ruger Chamber Flag YELLOW

Genuine Ruger Chamber FlagRemoved from NEW firearms we parted out.

Volquartsen SILVER Dovetail Picatinny Rail Mount for ALL Mark 1 2 3 4

THESE ARE SILVERThese are LONG discontinued, we just ran across some more.The Volquartsen Dovetail Scope Mount converts the sight dovetail on a Ruger Mark 1, 2, 3, 4, all 22/45 and LITE Pistols to a Picatinny style mount. This mount is the perfect...

Factory Ruger Sight Blade for Adjustable Handgun Sights .125" Black *D23

Fits ALL Ruger Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolRuger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above) .125" Blade with Black...

Volquartsen Pistol Competition Kit for Ruger Mark 1, 2, 3 Stainless Trigger (Scorpion) VC2PCK-S-ST

Trying to figure out which parts are needed to take the Ruger MKII, MKIII and 22/45 to the next level? Look no further than the Pistol Competition Kit. This kit includes: -Accurizing Kit-Bolt Tune-Up Kit-CNC-Machined Disconnector. The Pistol Competition...

Ruger Magazine Spring for ALL Modern Ruger "Mark" Pistol magazines 1 2 3 4 IV & all 22/45

This spring fits in ALL Mark series magazines with the plastic base pads (from factory)Will NOT fir old chrome base Mark 1 magazines.Fresh spring can help feeding issues with full mags. Click Here for our page on how to properly adjust your magazines...

Ruger Magazine Block Retaining Plunger for ALL Modern Ruger "Mark" Pistol Magazines 1 2 3 4 IV & all 22/45

This Plunger fits in ALL Mark series magazines with the plastic base pads (from factory)Will NOT fit old chrome base Mark 1 magazines.These can get shot into another dimension when disassembling a magazine. Click Here for our page on how to properly...

Used Ruger Mark 3 Stainless Steel Grip Frame Lower

SEE ALL OF OUR PARTED OUT MARK 3 STUFF HERE!This is NOT an FFL itemTHIS IS A STOCK PHOTOMay come with Silver or Black trigger, if this is important ASK FIRST!Expect Average condition to good conditionI will not get into grading these, If it looks new...

Volquartsen Pistol Competition Kit for Mark 1, 2, 3 Black Trigger (Scorpion) VC2PCK-B

Trying to figure out which parts are needed to take the Ruger MKII, MKIII and 22/45 to the next level? Look no further than the Pistol Competition Kit. This kit includes: -Accurizing Kit-Bolt Tune-Up Kit-CNC-Machined Disconnector. The Pistol Competition...

Volquartsen Ruger Mark 2, 3 Aluminum Target Grip Frame (Lower) Black (Scorpion)- VC3NF-B

Volquartsen TARGET frame Same as the Standard steel Ruger frames only aluminum and MUCH BETTER!!These will work with MK2 uppers also.About 5 ounces lighter than the Ruger Steel Frame.These frames will accept Ruger, Tac-Sol and most likely AMT uppers.They...

FTV 6" Volquartsen OPTICS READY Mark 2, 3 (Flat Top LLV Scorpion Upper) Black 1/2"x28 Threads with Comp

FFL REQUIREDVolquartsen OPTICS READY MK2 / MK3 FTV 6"Includes Single Port Compensator These are made to bolt a Vortex Venom Red Dot sight direct to the upperI'm not sure but I would expect some other Red Dot Sights would be compatibleThis fits on ANY...

Volquartsen Posi-Lock Bolt Latch for Ruger Mark 2 and 3

Are you tired of having to replace your factory bolt hold open latch? Volquartsen's Posi-Lock Bolt Hold Open Latch has been engineered to withstand years of use for even the most demanding shooter.Manufactured from hardened A2 tool steel this latch...

Volquartsen CNC-Machined Disconnector (trigger Bar) for MKII and MKIII - VC2DN

VC2DN CNC-Machined Disconnector is CNC-machined from 416 stainless steel. The machining process allows us to make several design changes to the the way the disconnector functions. We have added material that increases rigidity over the current design...

Volquartsen Stainless Extended Bolt Release for Ruger Mark 2 and 3 VC2BR-S

Fits Ruger Mark 2 and Mark 3 Standard frames**DOES NOT FIT ANY 22/45**Replaces the factory bolt release in minutes and provides the shooter with a .375” serrated face for an easier release of the bolt.

Volquartsen Accurizing Kit Fits Mark 1 2 3 Stainless Trigger VC2AK-S-ST

THIS is the kit you want for your Mark 3 to remove Magazine safety. Complete drop-in kit comes complete with:-Target Hammer-Target Sear-Target Trigger (available in a variety of colors)-Extended Bolt Release-Trigger Return Spring with...

TacSol Tactical Solutions Pac-Lite 1" Compensator Matte Black 1/2"x28

Tactical Solutions Pac-Lite 1" Compensator Fits Pac-Lite (current version) and All Ruger LITE 1/2"x28 Threads

Factory Ruger Tall Sight Blade for Adjustable Handgun Sights .140" High White Outline *D20

Fits ALL Ruger Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolRuger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above) .140" White Outline...

Factory Ruger Mark 1 2 3 Standard Frame Mainspring Housing Latch (NOT 22/45) *B8*

Factory Ruger Blued Mainspring Housing Latch Fits Mark Series 1, 2 or 3 Pistols These break now and then and can also provide contrast when mixing stainless and blued. WILL NOT WORK IN 22/45 FRAMES Only STANDARDPart Number: A00700

Volquartsen Ruger Mark 3 Aluminum 1911 Style (22/45) Grip Frame Black VC45NF-B

Volquartsen 1911 Style frame Same as the 22/45 Zytel (Polymer) Ruger frames only aluminum and MUCH BETTER!!Use this frame if you already shoot 1911 in something else.These will work with MK2 uppers also.These frames will accept Ruger, Tac-Sol and most...

Volquartsen SureStrike Firing Pin for Ruger Mark 1, 2, 3, 4 and ALL 22/45 and LITE

Volquartsen SureStrike Firing Pin is designed to minimize and/or eliminate light hits on the Ruger MKI, MKII and MKIII (including 22/45) pistol. The SureStrike Firing Pin is precision EDM machined from A2 tool steel. The impact section of the firing pin...

TacSol Tactical Solutions PERFORMANCE SERIES Pac-Lite 1" Compensator MATTE BLUE 1/2"x28

CUSTOM COLORTactical Solutions Pac-Lite 1" Compensator Fits Pac-Lite (current version) and All Ruger LITE 1/2"x28 Threads

Factory Ruger Hammer Pivot Pin Stainless for Mark 2, 3 (NOT 22/45) Pistols *A23

Hammer Pivot Pin Fits Ruger Mark Series 2 or 3This is the STAINLESS version, BLUED version is hereNOT FOR ANY 22/45 or any MARK 4These can provide contrast when mixing stainless in a blued frame.Part Number: KA02605

Factory Ruger Black Weaver Rail for ALL Factory Drilled/Tapped Mark 1 2 3 4 IV Pistols, 22/45 and Tac-Sol Pac-Lite (Pac-Lite needs different screws) 90228

Ruger Weaver Rail for ALL Mark Series PistolsWorks on FACTORY-DRILLED Mark Series Pistols.Same rail that shipped with most Ruger Mark 3 Blued Pistols-4.69" long-black aluminum3 screws included**6-48 threads are for FACTORY RUGER, check your thread pitch...

Factory Ruger Safety Detent Spring for Mark 1 2 3 Standard Frame (NOT 22/45) *B14

Factory Ruger Mark Series Pistol Safety Detent Spring Fits Mark I, II and III STANDARD FRAME ONLY(The very first 1949 - 1952 production years could differ, best to observe closely on these)NOT for any 22/45 or ANY Mark IV(CLICK HERE for the Mark II and...