Ruger Pistols

Factory Ruger 22/45 Mark 3 and MK3 LITE Bolt Stop - Release *F1

Factory Ruger Bolt Stop - ReleaseONLY FITS 22/45 Mark 3 and Mark 3 LITENOT for any Standard Frame or ANY Mark 2 or Mark IVONLY FITS MARK 3 22/45 and MARK 3 LITE

Volquartsen Volthane Right Hand Target Grip for Ruger Mark 3 Pistol and Scorpion

WILL NOT FIT ANY 22/45 or MK-IVImprove your shooting scores! Its design featuring thumbrest, heelrest and finger grooves has been unchanged for nearly 30 years. Shooters constantly comment how well the grip feels and fits their hand. That...

Volquartsen Black Aluminum Forward Blow Compensator .875" for Ruger Mark II, III, IV Steel Bull Barrel Receivers, 1/2"x28 Threads Bull Barrel VC10FWC-AB-875

Volquartsen Forward Blow Compensator for Ruger Mark I, II, III, IV in BLACK ALUMINUM- .875"- 1/2" x 28 threads- 2" longVolquartsen's Mark Forward Blow Comp in lightweight ALUMINUM! This compensator is for Ruger Mark Pistols with a .875 diameter STEEL...

Custom Anodized Factory Ruger Reversible Picatinny Rail for ALL Factory Drilled/Tapped Mark 1 2 3 4 IV Pistols, 22/45 and Tac-Sol Pac-Lite in Matte Red

Ruger Reversible Picatinny Rail for ALL Mark Series PistolsWorks on FACTORY-DRILLED Mark Series Pistols.Same rail that ships with Ruger Mark IV LITE and Tactical Series Pistols-reversible-4-3/8" long-anodized aluminumThese are a special run of FACTORY...

Custom Anodized Factory Ruger Front Sight for Ruger Mark 1 2 3 4 IV & All 22/45 Pistols with Bull, Slab or Fluted Barrels, NOT the LITE- Matte Red

Fits ALL Ruger Mark Pistols with Bull, Slab or Fluted BarrelsThis is the latest version and is Aluminum with serrations on the back (eye side)These are a special run of FACTORY Ruger front sights that we had anodized in our custom colors.Check out our...

Factory Ruger front sight screw for Ruger Mark 3 4 IV LITE Pistols ONLY *E21*

The Ruger LITE uses a special longer front sight screw because the upper is aluminum. This longer screw gives more "bite" in the soft material. This screw is unique to the LITE. These use 5/64" Allen Driver.

Factory Ruger Mark 2 or 3 *22/45* Mainspring Latch Lever *F5

Factory Ruger Blued Mainspring Housing Latch Fits 22/45 ONLY Mark Series 2 or 3 Pistols (for those that do not know,, a Mark 3 LITE is a 22/45). These break or get bent from someone trying to unlatch the mainspring when a magazine is in the pistol. These...

Factory Ruger KA-57 Recoil Rod Spring Assembly for ALL Ruger Mark 1 2 3

Factory Ruger KA-57 Recoil Spring Assembly for Mark 1 2 3.Seen these bent, worn out and lost.

Factory Ruger OLDER Style Front Sight for Ruger Mark 1 2 3 4 IV & All 22/45 Pistols with Standard Thin Taper Barrels *E14

OLDER Style Factory Ruger Front Sight Blade for Standard thin-tapered barrelsFits OLDER Ruger Mark Pistols with "Old School" Thin Taper Barrels in 4-3/4" and 6" ONLY. These can be Mark 1, 2, 3 and 4 standard and 22/45 frames. The front sight on your...

Volquartsen Black Extended Magazine Release For Ruger Mark 3

Fits Ruger Mark 3 Standard frames **DOES NOT FIT ANY 22/45** The MKIII Extended Magazine Release is an 1/8” longer than the factory release providing easier access. This release has also been modified to improve insertion of the factory...

Volquartsen Mark 3 LLV -Scorpion Black Compensator- VC3CL-B

Multi-Port Scorpion Comp for Mark 2 and 3 LLV ONLYMatches the LLV profile, so works on the Volquartsen Scorpion or Black Mamba, CNC-machined from a solid billet and finished for durability. Uses a knurled nut to tighten on muzzle threads. Pin wrench for...

Volquartsen CNC-Machined Disconnector (trigger Bar) for MKII and MKIII - VC2DN

VC2DN CNC-Machined Disconnector is CNC-machined from 416 stainless steel. The machining process allows us to make several design changes to the the way the disconnector functions. We have added material that increases rigidity over the current design...

Factory Ruger Mark IV Hammer

As pictured,Factory Ruger Mark IV Hammer, practice doing a trigger job with no risk to your factory parts.

Factory Ruger Mark IV 4 Magazine Ejector Assist Pin *22/45 FRAMES ONLY* *C4*

Factory Ruger 22/45 Mark IV 4 Magazine Ejector Assist PinWill NOT fit anything but MARK IV22/45 frame (plastic) ONLYPart #43 in Ruger Manual

Factory Ruger Tall Sight Blade for Adjustable Handgun Sights .140" High White Outline *D20

Fits ALL Ruger Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolRuger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above) .140" White Outline...

Volquartsen Ruger Mark 1, 2, 3, 4 ALL 22/45 and LITE Target Trigger GOLD

Fits Mark 1, 2, 3, 4 All 22/45 All LITECNC-machined Target Trigger features both pretravel and overtravel adjustments. Made of Aluminum Other trigger colors here UPC: 810162019549Model: VC2TT-GT

TacSol Tactical Solutions PERFORMANCE SERIES Pac-Lite 1" Compensator MATTE BLUE 1/2"x28

CUSTOM COLORTactical Solutions Pac-Lite 1" Compensator Fits Pac-Lite (current version) and All Ruger LITE 1/2"x28 Threads

Factory Ruger 22/45 Mark 3 NON-Removable Panels Hammer Pivot Pin *F16*

Factory Ruger Hammer Pivot PinONLY FITS 22/45 Mark 3 with NON-Removable PanlesNOT for any Standard Frame or ANY Mark 2 or Mark IVONLY FITS MARK 3 22/45

Factory Ruger Silver Weaver Rail for ALL Factory Drilled/Tapped Mark 1 2 3 4 IV Pistols, 22/45 and Tac-Sol Pac-Lite (Pac-Lite needs different screws) 90224

Ruger Weaver Rail for ALL Mark Series PistolsWorks on FACTORY-DRILLED Mark Series Pistols.Same rail that shipped with most Ruger Mark 3 Stainless Pistols-4.69" long-black aluminum3 screws included**6-48 threads are for FACTORY RUGER, check your thread...

Factory Ruger Black Weaver Rail for ALL Factory Drilled/Tapped Mark 1 2 3 4 IV Pistols, 22/45 and Tac-Sol Pac-Lite (Pac-Lite needs different screws) 90228

Ruger Weaver Rail for ALL Mark Series PistolsWorks on FACTORY-DRILLED Mark Series Pistols.Same rail that shipped with most Ruger Mark 3 Blued Pistols-4.69" long-black aluminum3 screws included**6-48 threads are for FACTORY RUGER, check your thread pitch...

OBSOLETE Factory Ruger Rear Sight Pivot Pin for Mark 1 2 3 4 IV Pistols *D7*

Fits ALL Ruger Mark Series PistolsRuger "LITE" is still a Mark series pistol Ruger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above)If you have an OLD EARLY Mark 1 with the...

Factory Ruger Sight Blade for Adjustable Handgun Sights .090" Black *D24*

Fits ALL Ruger Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolRuger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above) .090" Blade with Black...

Factory Ruger Mark 1 2 3 Mainspring (Hammer Spring) Plunger also fits 22/45 *B10

Factory Ruger Mainspring PlungerFits Mark Series 1, 2 and 3 Pistols, both Standard AND 22/45

Ruger SR1911 Silver Black Dymondwood Grips

Silverblack Dymondwood Grips are crafted from birch composite dyed to a attractive silver/black color and include the Ruger medallion. This is a natural wood product; color of wood grain varies. Made in America by Altamont.Does not fit SR1911® models...

Safety Screw for ALL Ruger Mark IV 4 Pistols 12.9 Hardness *H1*

Safety Screw for ALL Ruger Mark IV 4 Pistols 12.9 HardnessWILL NOT FIT ANYTHING BUT MARK IVFITS ALL MARK IV FRAMES These use 1.5 mm Allen Driver.Part #46 on Standard Mark IV manual, #31 on 22/45

NEWER Style Front Sight Blade SET SCREW for Ruger Mark 4 IV Pistols with Taper Barrels *E9*

This SET SCREW is for the NEWER Style Factory Ruger Front Sight Blade for Standard tapered barrels and the 75th Anniversary 40175 Model SEE PICTURES If you have an empty hole on the right side of your Front Sight, this is the set screw that goes in there...

Volquartsen Target Front Sight for 6" LLV (Scorpion, Mamba) and LLV-4 VCSFS-6

ONLY FITS 6" LLV UPPER(here's the sight for the 4.5" upper)Replacement front sights designed specifically for either the Volquartsen Scorpion pistol or LLV Competition Upper. Drop-in sights use existing pre-drilled & tapped holes.Model:VCSFS-6UPC:...

Volquartsen Stainless Extended Magazine Release For Ruger 22/45 Mark 3

Only Fits Ruger 22/45 Mark 3 frames **DOES NOT FIT ANYTHING ELSE**Will not fit 22/45 Mark 2 The MKIII Extended Magazine Release is an 1/8” longer than the factory release providing easier access. This release has also been modified to improve...

TruGlo Red Fiber Optic Front Sight for Ruger Mark Pistols and Browning Buck Mark

Fits most RUGER® MKII™, MKIII™, 22/45 and BROWNING® BUCK MARK® Rimfire Pistols This is for standard Bull Barrels only, will NOT fit Aluminum 1" diameter uppersWill also fit Buck Mark Bull barrelsReplaces existing front sightExtremely bright in...

Factory Ruger Mark IV 4 Magazine Ejector Assist Spring *22/45 FRAMES ONLY* *C3*

Factory Ruger Mark IV 22/45 Magazine Assist SpringWill NOT fit anything other than Mark IV 22/45 (PLASTIC) Frames.Part #41 in Exploded View

Factory Ruger Mark IV 4 Bolt Stop for 22/45 Frames (DOES NOT WORK WITH STANDARD FRAMES) *F14

Factory Ruger Mark IV Bolt Stop for 22/45 FramesWILL NOT FIT ANYTHING BUT MARK IV 22/45 FRAMEDOES NOT FIT STANDARD FRAMES DOES NOT FIT MARK 1, 2 OR 3Click HERE for the STANDARD versionPart #9 in manual

Factory Ruger Hammer Strut Pin for Mark 1 & 2 Pistols and MK2 22/45 *A14B

Factory Ruger Hammer Strut Pin Fits Mark Series 1 and 2 Pistols and 22/45 Mark 2. This pin is for Mark 1, 2 series only BUT is the same pin as Mark 3 only LONGER. The MK3 hammer is thinner in this area due to the magazine disconnect. These are "staked"...

Factory Ruger Scope Mount Screw for 10/22, Charger and Mark 1, 2, 3, 4 IV Pistols *E13

Factory Ruger Scope Base ScrewYou are buying a SINGLE SCREW buy as many as you need.These fit all "Factory Drilled" (pay attention to that) scope base holes on Ruger 10/22, Charger and all Mark Pistols including MK-IV. 6-48 Threads

Factory Ruger Sight Windage Spring for Adjustable Handgun Sights *D16*

Fits ALL Ruger Adjustable Sight Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolThis spring is also used on most Ruger Adjustable Sight RevolversThis should fit Pac-Lite rear sight alsoRuger Mark IV pistols from late 2018...

Used Ruger Mark 3 22/45 Mainspring Assembly

SEE ALL OF OUR PARTED OUT MARK 3 STUFF HERE!THIS IS A STOCK PHOTOExpect Average condition to good conditionI will not get into grading these, If it looks new it will be listed in a different listing with actual picturesIf it looks rough it will be...

Volquartsen Mark 3 LLV - Scorpion Black Single Port Compensator- VC3CL-ST-SP-B

Single Port Scorpion Comp for Mark 2 and 3 LLV ONLYMatches the LLV profile, so works on the Volquartsen Scorpion or Black Mamba, CNC-machined from a solid billet and finished for durability. Uses a knurled nut to tighten on muzzle threads. Pin wrench for...

Factory Ruger Sight Blade for Adjustable Handgun Sights "V" White Post *D14*

Fits ALL Ruger Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolRuger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above)"V" Blade with White Post...

Factory Ruger Stainless Steel Bolt Stop for Mark 2, 3 Pistols *A11

Factory Ruger Stainless Steel Bolt Stop Fits Mark Series 2 or 3 Pistols. NOT FOR MARK 1 (not needed) or 4 or ANY 22/45 or LITE

Pachmayr G10 Tan/Black Tactical Pistol Grips for Mark IV 22/45 Frame

Pachmayr G10 Grips for Mark IV 22/45 FRAME pistols. These grips WILL NOT work for STANDARD frames.These are new take-off grips from model 40167 Davidson's exclusive Mark IV 22/45 Tactical Davidson's Dark Earth. They're made by Pachmayr for FACTORY...

TacSol Tactical Solutions Pac-Lite Red LOW .365" Fiber Optic Front Sight will fit Ruger LITE

Tactical Solutions Front Sight LOW fits Current Generation Pac-Lite This sight will not fit older "stepped" barrel height Pac-Lites (barrel is smaller diameter than receiver)Will also fit Ruger LITE onlyThis sight is TOO SHORT for other barrels on Ruger...

Factory Issued Ruger Instruction / Owner's Manual - Mark IV Pistols - MKIV 9/18 R4

Factory Issued Ruger Instruction / Owner's Manual - Mark IV PistolsMKIV 9/18 R4This is a Genuine Factory issued Ruger Owner’s Manual that was removed from a parted out firearm.Condition is "useable", most are very good and we toss any that we notice are...

Factory Issued Ruger Instruction / Owner's Manual - Mark IV Pistols - MKIV 1/18 R3

Factory Issued Ruger Instruction / Owner's Manual - Mark IV PistolsMKIV 1/18 R3This is a Genuine Factory issued Ruger Owner’s Manual that was removed from a parted out firearm.Condition is "useable", most are very good and we toss any that we notice are...

Factory Ruger Elevation Spring for Newer Version Mark IV Rear Sight J6

This is for the newer version Rear Sight that Ruger started using On Mark IV pistols in late 2018.SEE PICTURES FOR VERIFICATION

Used Ruger Mark 2 Blued Bolt Straight Ears

SEE ALL OF OUR PARTED OUT MARK 2 STUFF HERE!THIS IS A STOCK PHOTOExpect Average condition to good conditionI will not get into grading these, If it looks new it will be listed in a different listing with actual picturesIf it looks rough it will be listed...

Factory Ruger Mark IV 4 Magazine Ejector Assist *22/45 FRAMES ONLY* *F8*

Factory Ruger Mark IV Magazine Ejector AssistWill ONLY fit MARK IV 22/45 Frames (PLASTIC)Part #42 in Ruger ManualThe Ejector Assist Spring is HERE

Ruger TALO Mark IV 4 Raffir Hunter Grips 40132-1708311638

Ruger Mark IV TALO Raffir Hunter GripsThe grip set you see in this listing is THE set you get, click HERE for our other sets!ONLY FITS Mark IV Standard FramesWILL NOT FIT ANY 22/45Genuine Ruger Accessory from TALO. Take-off from parted out model #40132...

Williams 633505 Adjustable Firesight Fiber Optic Sight Set -ONLY- for Ruger Mark 3 and 4 LITE

Firesight with a dovetail rear sight and screw-on front sight for Mark III and IV LITE Uppers. Features a click adjustment design for windage and elevation adjustment, high visibility fiber optics for target shooting and hunting, and improved visibility...

NEW/OPEN BOX Volquartsen 22/45 Mainspring for Ruger Mark 2, 3 Pistols Black

OPEN-RETURN NO ISSUES-AS NEW   These mainsprings are NEW, but are from OPEN PACKAGING. They were returned by owners of standard frame marks who mistakenly bought the wrong mainspring. Totally unused.WILL NOT FIT ANY STANDARD FRAMEComplete...

TacSol Tactical Solutions Pac-Lite REPLACEMENT 1" Diameter Thread Protector (End Cap) Matte Red 1/2"x28

ANODIZING WILL NEVER BE AN EXACT MATCH FINISHTactical Solutions Pac-Lite 1" Diameter Replacement Thread Protector Fits Pac-Lite (current version) and All Ruger LITE 1/2"x28 Threads

TacSol Tactical Solutions Pac-Lite Green LOW .365" Fiber Optic Front Sight will fit Ruger LITE

Tactical Solutions Front Sight LOW fits Current Generation Pac-Lite This sight will not fit older "stepped" barrel height Pac-Lites (barrel is smaller diameter than receiver)Will also fit Ruger LITE onlyThis sight is TOO SHORT for other barrels on Ruger...

TacSol Tactical Solutions Pac-Lite Red HIGH .440" Fiber Optic Front Sight will fit Ruger Steel Bull type barrels

Tactical Solutions Front Sight HIGH (.440") fits FIRST Generation Pac-Lite with step from receiver to barrel.Will also fit Ruger Bull, Slab Side and Fluted STEEL BARRELS This sight will not fit newer same barrel height Pac-Lites (barrel is same diameter...

Factory Issued Ruger Instruction / Owner's Manual - Mark IV Pistols - MKIV 3/17 R2

Factory Issued Ruger Instruction / Owner's Manual - Mark IV PistolsMKIV 3/17 R2This is a Genuine Factory issued Ruger Owner’s Manual that was removed from a parted out firearm.Condition is "useable", most are very good and we toss any that we notice are...