HANDGUN

TacSol Tactical Solutions Pac-Lite 1" Compensator Matte OD Green 1/2"x28

Tactical Solutions Pac-Lite 1" Compensator Fits Pac-Lite (current version) and All Ruger LITE 1/2"x28 Threads

Ruger Red Ramp 3 Screw Front Sight for Super Redhawk Revolvers *E18*

Factory Ruger Red Ramp 3 Screw Front Sight made of steel with red plastic insert. .610" high 3-screw front sightThis red ramp front sight only fits the Super Redhawk with an existing 3-screw factory sight. Screws not included. Made in the USA.Genuine...

RUGER New Vaquero Rosewood Spanish Dymondwood Grips 72

Factory Ruger Spanish Dymondwood Grips for New Vaquero For NVB Frame revolvers with OR without internal lock. This includes New Model Vaqueros (510-XXXXX serial numbers), SAS Vaquero, 50th Anniversary (.357 and .44 Flat-Top) Blackhawks, and pre-1963...

Factory Ruger Mark IV Sear

Factory Ruger Mark IV Sear, practice doing a trigger job with no risk to your factory parts.

Factory Ruger Mark IV 4 Bolt Stop Thumb Piece *22/45 FRAMES ONLY* *C9

Factory Ruger Mark IV 22/45 Bolt Stop Thumb PieceWill ONLY fit MARK IV 22/45 Frames (Plastic)Part #40 in Ruger Manual

Factory Ruger Loaded Chamber Indicator (LCI) GREY for Mark 3 Pistols and MK3 22/45

Factory Ruger Loaded Chamber Indicator GREYNOT FOR MARK 1, 2 or 4Contrary to popular Internet gossip I actually don't follow the belief that these cause feeding issues or stovepipes.Feeding issues are almost always the magazine.Stovepipes would be...

Factory Ruger Windage Screw for Newer Version Mark IV Rear Sight J9

This is for the newer version Rear Sight that Ruger started using On Mark IV pistols in late 2018.SEE PICTURES FOR VERIFICATION

Factory Ruger Lock Detent Plunger for Mark 3 Mainspring Housings *B4

Factroy Ruger Lock Detent Plunger for Mark 3 Mainspring HousingsThis is part of the Child Safety Lock Mechanism on Mark 3 Mainspring HousingsWorks on BOTH Standard and 22/45

Used Ruger Mark 3 22/45 Mainspring Assembly

SEE ALL OF OUR PARTED OUT MARK 3 STUFF HERE!THIS IS A STOCK PHOTOExpect Average condition to good conditionI will not get into grading these, If it looks new it will be listed in a different listing with actual picturesIf it looks rough it will be...

Factory Ruger Mark III 3 Half Checkered Laminated Wood Grips

WILL NOT FIT ANY 22/45 or Mark I, II, IVONLY FITS Mark III Standard FramesLaminate grips with red Ruger medallion for Ruger Mark III™ Pistols only. Lower half of panels is checkered. Genuine Ruger Factory Accessory Includes set of four screws. Made in...

Factory Ruger Blued Magazine Latch / Release Button for Mark 3, 4 (IV) Standard Frame Pistols (NOT 22/45) *C23*

Factory Ruger Blued Magazine Latch / Button for Mark 3 and 4 PistolsWill not fit any 22/45 and not needed on Mark 1 or 2 series. No Spring or Plunger includedNOT FOR MARK 1, 2 or ANY 22/45 or LITEIf your magazine is "popping" out, this may fix it.

Hoppe's BoreSnake for .22 Caliber Pistols

Hoppe's BoreSnake in 22 cal for PISTOLSThe original one-pass bore cleaning tool uses an integrated bronze brush to scrub out carbon fouling, white the tail clears the barrel of loose debris with a surface area 160x larger than a standard patch. It also...

Chiappa Charging Rhino Walnut Finger Groove Grips #11

Genuine Chiappa Rhino Walnut Finger Groove Grips THESE FIT ALL RHINO REVOLVERS These grips vary slightly in hue and grain, as with any natural wood product, so we made a few individual listings like we do with 10/22 stocks. The grip you see in the...

Chiappa Charging Rhino NEBULA BLUE Laminate Finger Groove Grip #5

Genuine Chiappa Rhino Laminate Finger Groove Grips THESE FIT ALL RHINO REVOLVERS The nebula grips are finally here, but there's a bit of a variation from previous grips. These grips have a GLOSS finish instead of the MATTE finish of previous stock. The...

Chiappa Charging Rhino NEBULA BLUE Laminate Finger Groove Grip #2

Genuine Chiappa Rhino Laminate Finger Groove Grips THESE FIT ALL RHINO REVOLVERS The nebula grips are finally here, but there's a bit of a variation from previous grips. These grips have a GLOSS finish instead of the MATTE finish of previous stock. The...

Chiappa Charging Rhino NEBULA BLUE Laminate Finger Groove Grip #10

Genuine Chiappa Rhino Laminate Finger Groove Grips THESE FIT ALL RHINO REVOLVERS The nebula grips are finally here, but there's a bit of a variation from previous grips. These grips have a GLOSS finish instead of the MATTE finish of previous stock. The...

BullsEye G10 Grips Ruger 22/45 Mark 3 RIGHT Hand Thumbrest Black Gray

YES G10 Thumbrest Grips for Ruger Mark 3 22/45Made in USA by a small family owned company**STOCK PHOTOS** color stacking will vary someWILL NOT FIT ANY STANDARD FRAME Mark Pistols

NEW/OPEN BOX HiViz Fiber Optic Ruger 22/45 LITE Mark 3 4 IVand Tac-Sol Pac-Lite, LiteWave Front Sight

OPEN-RETURN NO ISSUES-AS NEW   Improve the performance of your Ruger 22/45 LITE with the new Fiber Optic LITEWAVE® sight. Our bright and ultra-durable LITEWAVE® sights will enhance your confidence and shooting experience. This is NOT for...

Custom Anodized Factory Ruger Reversible Picatinny Rail for ALL Factory Drilled/Tapped Mark 1 2 3 4 IV Pistols, 22/45 and Tac-Sol Pac-Lite (Pac-Lite needs different screws) in Gun Metal Gray

Ruger Reversible Picatinny Rail for ALL Mark Series PistolsWorks on FACTORY-DRILLED Mark Series Pistols.Same rail that ships with Ruger Mark IV LITE and Tactical Series Pistols-reversible-4-3/8" long-anodized aluminumThese are a special run of FACTORY...

Volquartsen Exact Edge Extractor for Smith & Wesson S&W SW22 Victory VCSWEE

VCSWEEThe Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under impact such as other extractors made from stamped steel or titanium that will have their edges roll...

Volquartsen Mark 3 LLV Scorpion Black Accessory Rail VCSN-R

This accessory rail mounts to the underside of the barrel on the Scorpion Pistol and LLV Competition Pistol Upper.NOT ALL SCORPION OR MARK 3 LLV UPPERS ARE DRILLED AND TAPPED FOR THIS RAIL!!PLEASE CHECK YOURS BEFORE ORDERINGModel: VCSN-R

Volquartsen Black Extended Bolt Release for Ruger Mark 2 and 3

New style in FIRST pictureWe still have some OLD style in 2nd pictureYou will get the NEW unless you contact us QUICKLYFits Ruger Mark 2 and Mark 3 Standard frames**DOES NOT FIT ANY 22/45**Replaces the factory bolt release in minutes and provides the...

TacSol Tactical Solutions PERFORMANCE SERIES Pac-Lite 1" Compensator Matte Gun Metal Gray 1/2"x28

CUSTOM COLORTactical Solutions Pac-Lite 1" Compensator Fits Pac-Lite (current version) and All Ruger LITE 1/2"x28 Threads

TacSol Tactical Solutions Buck Mark Standard Picatinny Rail

Standard Scope Base: 4.97"UPC: 879971001350Model: BMSR-STD

Ruger Adjustable Rear Sight High White Outline for GP100 and most Ruger Revolvers

Factory Rear Sight Assembly with High BladeFits most Ruger Revolvers with Adjustable Rear SightDo your homework on what blade you want/needTaller blade fixes shooting LowWider notch gives more light on either side of front bladeWe have other blades and...

Factory Ruger Lock Pin for Mark 3 Mainspring Housings *B5

Factory Ruger Lock Pin for Mark 3 Mainspring HousingsThis is part of the Child Safety Lock Mechanism on Mark 3 Mainspring HousingsWorks on BOTH Standard and 22/45

Birchwood Casey Synthetic Gun Oil, 2 fl. oz. Pump Spray 44123

VERY COOL PUMP SPRAY BOTTLE with SYNTHETIC OIL!!!I had been looking for such a thing for myself!Please note: This item cannot be shipped to an address within the State of California.A superior gun oil for all climates. Reduces the friction between mating...

Volquartsen Buck Mark Exact Edge Extractor

Volquartsen Exact Edge ExtratorThese have LONG since been discontinued by VolquartsenWe bought a bunch of them LOOSE PACKEDSo they will ship NOT in retail packagingThere will be no more once these are gone

Custom Anodized Factory Ruger Reversible Picatinny Rail for ALL Factory Drilled/Tapped Mark 1 2 3 4 IV Pistols, 22/45 and Tac-Sol Pac-Lite (Pac-Lite needs different screws) in Matte Blue

Ruger Reversible Picatinny Rail for ALL Mark Series PistolsWorks on FACTORY-DRILLED Mark Series Pistols.Same rail that ships with Ruger Mark IV LITE and Tactical Series Pistols-reversible-4-3/8" long-anodized aluminumThese are a special run of FACTORY...

Factory Ruger OLDER Style Front Sight for Ruger Mark 1 2 3 4 IV & All 22/45 Pistols with Standard Thin Taper Barrels *E14

OLDER Style Factory Ruger Front Sight Blade for Standard thin-tapered barrelsFits OLDER Ruger Mark Pistols with "Old School" Thin Taper Barrels in 4-3/4" and 6" ONLY. These can be Mark 1, 2, 3 and 4 standard and 22/45 frames. The front sight on your...

Custom Anodized Factory Ruger Front Sight for Ruger Mark 1 2 3 4 IV & All 22/45 Pistols with Bull, Slab or Fluted Barrels, NOT the LITE- Matte Blue

Fits ALL Ruger Mark Pistols with Bull, Slab or Fluted BarrelsThis is the latest version and is Aluminum with serrations on the back (eye side)These are a special run of FACTORY Ruger front sights that we had anodized in our custom colors.Check out our...

Ruger TALO Mark IV 4 Raffir Hunter Grips 40132-1708311636

Ruger Mark IV TALO Raffir Hunter GripsThe grip set you see in this listing is THE set you get, click HERE for our other sets!ONLY FITS Mark IV Standard FramesWILL NOT FIT ANY 22/45Genuine Ruger Accessory from TALO. Take-off from parted out model #40132...

Ruger TALO Mark IV 4 Raffir Hunter Grips 40132

Ruger Mark IV TALO Raffir Hunter GripsThe grip set you see in this listing is THE set you get, click HERE for our other sets!ONLY FITS Mark IV Standard FramesWILL NOT FIT ANY 22/45Genuine Ruger Accessory from TALO. Take-off from parted out model #40132...

Volquartsen Picatinny Scope Rail for Smith & Wesson S&W SW22 Victory- VCSWR-B

VCSWR-BPicatinny Scope Rail for the SW22 is CNC-machined from aluminum billet. It is designed to replace the plastic scope rail on the SW22.Mount will accept all rings and optics designed for a Picatinny rail.Type III black hard anodized1913 Mil-Spec...

Volquartsen Accurizing Kit Fits Mark 1 2 3 GOLD Trigger (Scorpion)

THIS is the kit you want for your Mark 3 to remove Magazine safety. Complete drop-in kit comes complete with:-Target Hammer-Target Sear-Target Trigger (available in a variety of colors)-Extended Bolt Release-Trigger Return Spring with...

TacSol Tactical Solutions Pac-Lite Adjustable Rear Sight

Tactical Solutions Pac-Lite Rear SightThis is THE factory TacSol rear sight that comes on all of their Pac-Lites! It features adjustable elevation and windage.ONLY compatible with Tactical Solutions PAC-LITES. These do not work on on any Ruger uppers...

TacSol Tactical Solutions Pac-Lite Aluminum Mark 3 Grips Matte Turquoise

CUSTOM COLOR Matte Turquoise Tactical Solutions Aluminum grips for Mark 3 but will fit Mark 2 and LATE (A-100) Mark 1Made for tac-Sol by Hogue

TacSol Tactical Solutions Pac-Lite Aluminum Mark 3 Grips Matte Orange

CUSTOM COLOR Matte OrangeTactical Solutions Aluminum grips for Mark 3 but will fit Mark 2 and LATE (A-100) Mark 1Made for tac-Sol by Hogue

TacSol Tactical Solutions PERFORMANCE SERIES Pac-Lite 1" Compensator Matte Turquoise 1/2"x28

CUSTOM COLORTactical Solutions Pac-Lite 1" Compensator Fits Pac-Lite (current version) and All Ruger LITE 1/2"x28 Threads

TacSol Tactical Solutions PERFORMANCE SERIES Pac-Lite 1" Compensator MATTE ORANGE 1/2"x28

CUSTOM COLORTactical Solutions Pac-Lite 1" Compensator Fits Pac-Lite (current version) and All Ruger LITE 1/2"x28 Threads

TacSol Tactical Solutions Trail-Lite REPLACEMENT Thread Protector (End Cap) Bright Silver 1/2"x28

Tactical Solutions Trail-Lite Replacement Thread Protector ANODIZING WILL NEVER BE AN EXACT MATCH FINISHBuy the color that matches your barrel OR set it off with another color!-for Trail-Lite (current version) and Browning Buck Mark -1/2"x28 ThreadsOther...

TacSol Tactical Solutions Trail-Lite REPLACEMENT Thread Protector (End Cap) Matte Red 1/2"x28

Tactical Solutions Trail-Lite Replacement Thread Protector ANODIZING WILL NEVER BE AN EXACT MATCH FINISHBuy the color that matches your barrel OR set it off with another color!-for Trail-Lite (current version) and Browning Buck Mark -1/2"x28 ThreadsOther...

TacSol Tactical Solutions 1/2x28 Trail-Lite Browning Buck Mark Compensator Matte Orange

*** CUSTOM COLOR ***Tactical Solutions 1/2x28 Trail-Lite Compensator.900" Diameter For Browning Buck Mark Pistol

Ruger Adjustable Rear Sight Low White Outline for GP100 and most Ruger Revolvers

Factory Rear Sight Assembly with Low BladeFits most Ruger Revolvers with Adjustable Rear SightDo your homework on what blade you want/needTaller blade fixes shooting LowWider notch gives more light on either side of front bladeWe have other blades and...

Ruger GP100, Super Redhawk, Alaskan COMPACT Rosewood Panel Grip 70084

COMPACT Ruger Laminated Rosewood Panel Rubber GripFits Super RedhawkAlaskanGP100SOME SRH AND GP100 HAVE A 3/8" HOLE IN THE GRIP FRAMETHESE GRIPS USE THE MORE COMMON 7/16" HOLECHECK YOUR HOLE SIZE BEFORE PURCHASING!Check out the COMPACT version HEREModel:...

Factory Ruger Loaded Chamber Indicator (LCI) BLACK for Mark 3 Pistols and MK3 22/45

Factory Ruger Loaded Chamber Indicator BLACKNOT FOR MARK 1, 2 or 4Contrary to popular Internet gossip I actually don't follow the belief that these cause feeding issues or stovepipes.Feeding issues are almost always the magazine.Stovepipes would be...

Used Ruger Mark 3 Stainless Bolt

THIS IS A STOCK PHOTOExpect Average condition to good conditionI will not get into grading these, If it looks new it will be listed in a different listing with actual picturesIf it looks rough it will be listed in a different listingIf any of the above...

Chiappa Charging Rhino Walnut Finger Groove Grips #5

Genuine Chiappa Rhino Walnut Finger Groove Grips THESE FIT ALL RHINO REVOLVERS These grips vary slightly in hue and grain, as with any natural wood product, so we made a few individual listings like we do with 10/22 stocks. The grip you see in the...

BullsEye G10 Grips Smith & Wesson S&W SW22 Victory RIGHT Hand Thumbrest Black

YES G10 Thumbrest Grips for S&W VictoryMade in USA by a small family owned company**STOCK PHOTOS** color stacking will vary someWILL NOT FIT ANY STANDARD FRAME Mark Pistols

"BLEM" TacSol Tactical Solutions Pac-Lite REPLACEMENT 1" Diameter Thread Protector (End Cap) 1/2"x28 MATTE Laser Green

BLEM ANODIZING WILL NEVER BE AN EXACT MATCH FINISHTactical Solutions Pac-Lite 1" Replacement Thread Protector Fits Pac-Lite (current version) and All Ruger LITE 1/2"x28 Threads

TacSol Tactical Solutions Pac-Lite REPLACEMENT 1" Diameter Thread Protector (End Cap) 1/2"x28 MATTE Laser Green

ANODIZING WILL NEVER BE AN EXACT MATCH FINISHTactical Solutions Pac-Lite 1" Replacement Thread Protector Fits Pac-Lite (current version) and All Ruger LITE 1/2"x28 Threads

TacSol Tactical Solutions Pac-Lite 1" Compensator MATTE Laser Green 1/2"x28

CUSTOM COLOR MATTE Laser GreenTactical Solutions Pac-Lite 1" Compensator Fits Pac-Lite (current version) and All Ruger LITE 1/2"x28 Threads