HANDGUN

TacSol Tactical Solutions Pac-Lite Red LOW .365" Fiber Optic Front Sight will fit Ruger LITE

Tactical Solutions Front Sight LOW fits Current Generation Pac-Lite This sight will not fit older "stepped" barrel height Pac-Lites (barrel is smaller diameter than receiver)Will also fit Ruger LITE onlyThis sight is TOO SHORT for other barrels on Ruger...

TacSol Tactical Solutions Buck Mark Integral Picatinny Rail & Rear Sight

Integral Scope Base (Includes Rear Sight): 4.97"UPC: 879971001350Model: BMSR-INT

Factory Issued Ruger Instruction / Owner's Manual - Mark IV Pistols - MKIV 9/18 R4

Factory Issued Ruger Instruction / Owner's Manual - Mark IV PistolsMKIV 9/18 R4This is a Genuine Factory issued Ruger Owner’s Manual that was removed from a parted out firearm.Condition is "useable", most are very good and we toss any that we notice are...

Factory Issued Ruger Instruction / Owner's Manual - Mark IV Pistols - MKIV 1/18 R3

Factory Issued Ruger Instruction / Owner's Manual - Mark IV PistolsMKIV 1/18 R3This is a Genuine Factory issued Ruger Owner’s Manual that was removed from a parted out firearm.Condition is "useable", most are very good and we toss any that we notice are...

RUGER Smooth Rosewood Grips for SQUARE TRIGGER GUARD New Model Super Blackhawk 47

Factory Ruger Rosewood Grips For Super Blackhawk Single-Action Frame Revolvers with a SQUARE trigger guard. This includes: -Super Blackhawk-Super Blackhawk Hunter-New Model Single-Six HunterWILL NOT FIT ROUND Trigger Guard Frames.Includes one screw,...

Factory Ruger Elevation Spring for Newer Version Mark IV Rear Sight J6

This is for the newer version Rear Sight that Ruger started using On Mark IV pistols in late 2018.SEE PICTURES FOR VERIFICATION

Used Ruger Mark 2 Blued Bolt Straight Ears

SEE ALL OF OUR PARTED OUT MARK 2 STUFF HERE!THIS IS A STOCK PHOTOExpect Average condition to good conditionI will not get into grading these, If it looks new it will be listed in a different listing with actual picturesIf it looks rough it will be listed...

Factory Ruger Mark IV 4 Magazine Ejector Assist *22/45 FRAMES ONLY* *F8*

Factory Ruger Mark IV Magazine Ejector AssistWill ONLY fit MARK IV 22/45 Frames (PLASTIC)Part #42 in Ruger ManualThe Ejector Assist Spring is HERE

Custom Anodized Factory Ruger Front Sight for Ruger Mark 1 2 3 4 IV & All 22/45 Pistols with Bull, Slab or Fluted Barrels, NOT the LITE- Matte Red

Fits ALL Ruger Mark Pistols with Bull, Slab or Fluted BarrelsThis is the latest version and is Aluminum with serrations on the back (eye side)These are a special run of FACTORY Ruger front sights that we had anodized in our custom colors.Check out our...

Ruger TALO Mark IV 4 Raffir Hunter Grips 40132-1708311638

Ruger Mark IV TALO Raffir Hunter GripsThe grip set you see in this listing is THE set you get, click HERE for our other sets!ONLY FITS Mark IV Standard FramesWILL NOT FIT ANY 22/45Genuine Ruger Accessory from TALO. Take-off from parted out model #40132...

Williams 633505 Adjustable Firesight Fiber Optic Sight Set -ONLY- for Ruger Mark 3 and 4 LITE

Firesight with a dovetail rear sight and screw-on front sight for Mark III and IV LITE Uppers. Features a click adjustment design for windage and elevation adjustment, high visibility fiber optics for target shooting and hunting, and improved visibility...

Volquartsen Exact Edge Extractor for Smith & Wesson S&W Model 41 Pistol VC41EE

VC41EEThe Exact Edge Extractor is manufactured through an EDM process to produce exacting tolerances. The new extractor will not lose its edge under impact such as other extractors made from stamped steel or titanium that will have their edges roll over...

NEW/OPEN BOX Volquartsen 22/45 Mainspring for Ruger Mark 2, 3 Pistols Black

OPEN-RETURN NO ISSUES-AS NEW   These mainsprings are NEW, but are from OPEN PACKAGING. They were returned by owners of standard frame marks who mistakenly bought the wrong mainspring. Totally unused.WILL NOT FIT ANY STANDARD FRAMEComplete...

TacSol Tactical Solutions Pac-Lite Green LOW .365" Fiber Optic Front Sight will fit Ruger LITE

Tactical Solutions Front Sight LOW fits Current Generation Pac-Lite This sight will not fit older "stepped" barrel height Pac-Lites (barrel is smaller diameter than receiver)Will also fit Ruger LITE onlyThis sight is TOO SHORT for other barrels on Ruger...

TacSol Tactical Solutions Pac-Lite Red HIGH .440" Fiber Optic Front Sight will fit Ruger Steel Bull type barrels

Tactical Solutions Front Sight HIGH (.440") fits FIRST Generation Pac-Lite with step from receiver to barrel.Will also fit Ruger Bull, Slab Side and Fluted STEEL BARRELS This sight will not fit newer same barrel height Pac-Lites (barrel is same diameter...

TacSol Tactical Solutions 1/2x28 Trail-Lite Browning Buck Mark Compensator Matte OD Green

Tactical Solutions 1/2x28 Trail-Lite Compensator.900" Diameter For Browning Buck Mark Pistol

Factory Issued Ruger Instruction / Owner's Manual - Mark IV Pistols - MKIV 3/17 R2

Factory Issued Ruger Instruction / Owner's Manual - Mark IV PistolsMKIV 3/17 R2This is a Genuine Factory issued Ruger Owner’s Manual that was removed from a parted out firearm.Condition is "useable", most are very good and we toss any that we notice are...

Ruger Stainless Rear Sight Pivot Pin for most Ruger Revolvers *D1*

Stainless Rear Sight Pivot PinFits most Ruger Revolvers with Adjustable Rear SightThese typically fit;GP100Super RedhawkSuper BlackhawksBlackhawk Hunter modelsRedhawksAND MORE,,,

RUGER Smooth Black Laminated Wood Grips for Single-Action Bisleys 86

Factory Ruger Black Laminate Single-Action Bisley Laminate Wood Grips For single-action Bisleys (ie Bisley Hunter, Bisley Vaquero).Includes one screw, you get what is shown in the first picture.This is a wood product and grain/color will vary, as shown...

Factory Ruger Mark IV Hammer

As pictured,Factory Ruger Mark IV Hammer, practice doing a trigger job with no risk to your factory parts.

Factory Ruger Trigger Pivot Retainer for Mark 2, 3 Standard Frames *B23*

Factory Ruger Trigger Pivot Pin RetainerONLY FITS Mark 2 and 3 Standard Frame Pistols. These tend to get damaged with improper disassembly.Does NOT fit ANY 22/45

Factory Ruger STAINLESS Trigger Pivot Pin for Mark 2, 3, 4 (IV) Standard Frames *A21

Factory Ruger STAINLESS Trigger Pivot Pin (BLUED pin here)ONLY FITS STANDARD Frames in Mark 2, 3 and 4 Can also fit Mark 1 frames if both holes are same size. (smaller hole can be drilled size of larger hole to make work)NOT for any 22/45

Factory Ruger Hammer Strut for Mark Series 1, 2, 3 and MK 2 3 22/45 Pistols *A17

Factory Ruger Hammer Strut for ALL Mark 1, 2 and 3 Pistols including 22/45 versionsNOT FOR ANY MARK 4 PISTOLS

Factory Ruger front sight screw for Ruger Mark 3 4 IV LITE Pistols ONLY *E21*

The Ruger LITE uses a special longer front sight screw because the upper is aluminum. This longer screw gives more "bite" in the soft material. This screw is unique to the LITE. These use 5/64" Allen Driver.

Factory Ruger Sight Windage Spring for Adjustable Handgun Sights *D16*

Fits ALL Ruger Adjustable Sight Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolThis spring is also used on most Ruger Adjustable Sight RevolversThis should fit Pac-Lite rear sight alsoRuger Mark IV pistols from late 2018...

Factory Ruger Windage Screw for Adjustable Handgun Sights *D15*

Fits MOST Ruger Adjustable Sight Mark Series Pistols (see notes below)Ruger "LITE" is still a Mark series pistolRuger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above)This is...

OBSOLETE Factory Ruger Rear Sight Pivot Pin for Mark 1 2 3 4 IV Pistols *D7*

Fits ALL Ruger Mark Series PistolsRuger "LITE" is still a Mark series pistol Ruger Mark IV pistols from late 2018 on have a NEW rear sightThis part is NOT compatible with the new design sight (see pictures above)If you have an OLD EARLY Mark 1 with the...

Factory Ruger Bolt Stop Plunger Spring for Mark 2, 3 Pistols NOT 22/45 *A9*

Factory Ruger Bolt Stop Plunger Spring Fits Mark Series 2 or 3 Pistols. Will not fit any 22/45 and not needed on Mark 1 series. NOT FOR MARK 1 or 4 or ANY 22/45 or LITEIf your bolt stop is acting odd you may need a new spring

Factory Ruger 22/45 Mark 3 and MK3 LITE Bolt Stop - Release Spring *F2

Factory Ruger Bolt Stop - Release SpringONLY FITS 22/45 Mark 3 and Mark 3 LITENOT for any Standard Frame or ANY Mark 2 or Mark IVONLY FITS MARK 3 22/45 and MARK 3 LITE

Ruger SR1911 Engraved Scroll & Checker Cocobolo Grips

Ruger SR1911 Engraved Scroll & Checker Cocobolo Grips This is a natural wood product; color of wood grain varies. Made in America by Altamont.Does not fit SR1911® models equipped with an ambidextrous manual safety.

HiViz Front Sight for Ruger Mark Pistols with HEAVY Taper Barrels

This is an interchangeable style Ruger Mark Series HEAVY TAPER Barrel pistol sight. This is for HEAVY TAPER Barrels only, will NOT fit Standard Taper BarrelsIt includes six fiber optic family LitePipes, in various colors, a carrying case, and a key to...

HiViz Ruger LCR Green Front Sight for LCR and LCRx in .38, .357, and 9mm

This is a front Ruger LCR revolver sight, with resin overmolding. It fits the Ruger LCR and LCRx in .38,.357 and 9mm caliber. It does not fit the LCR 22, 22 Mag and 327 Federal.

Ruger GP100, Super Redhawk & Alaskan Hogue Rubber Combat Grip 80010

NO Finger GrovesFits;GP100Super RedhawkAlaskan

Ruger GP100, Super Redhawk & Alaskan Hogue Finger Groove Rubber Grip 80000

Rubber Finger Grove GripFits;GP100Super RedhawkAlaskan

Chiappa Charging Rhino Walnut Finger Groove Grips #9

Genuine Chiappa Rhino Walnut Finger Groove Grips THESE FIT ALL RHINO REVOLVERSThese grips vary slightly in hue and grain, as with any natural wood product, so we made a few individual listings like we do with 10/22 stocks. The grip you see in the...

Chiappa Charging Rhino Walnut Finger Groove Grips #8

Genuine Chiappa Rhino Walnut Finger Groove Grips THESE FIT ALL RHINO REVOLVERS These grips vary slightly in hue and grain, as with any natural wood product, so we made a few individual listings like we do with 10/22 stocks. The grip you see in the...

Chiappa Charging Rhino NEBULA BLUE Laminate Finger Groove Grip #9

Genuine Chiappa Rhino Laminate Finger Groove Grips THESE FIT ALL RHINO REVOLVERS The nebula grips are finally here, but there's a bit of a variation from previous grips. These grips have a GLOSS finish instead of the MATTE finish of previous stock. The...

Chiappa Charging Rhino NEBULA BLUE Laminate Finger Groove Grip #8

Genuine Chiappa Rhino Laminate Finger Groove Grips THESE FIT ALL RHINO REVOLVERS The nebula grips are finally here, but there's a bit of a variation from previous grips. These grips have a GLOSS finish instead of the MATTE finish of previous stock. The...

Birchwood Casey Synthetic Gun Oil, 2 fl. oz. Pump Spray 44123

VERY COOL PUMP SPRAY BOTTLE with SYNTHETIC OIL!!!I had been looking for such a thing for myself!Please note: This item cannot be shipped to an address within the State of California.A superior gun oil for all climates. Reduces the friction between mating...

BullsEye G10 Grips Smith & Wesson S&W SW22 Victory "Sunburst" Pattern Black

YES G10 Grips for S&W VictoryMade in USA by a small family owned company**STOCK PHOTOS** color stacking will vary someWILL NOT FIT ANY STANDARD FRAME Mark Pistols

Safety Screw for ALL Ruger Mark IV 4 Pistols 10.9 Hardness *H5*

Safety Screw for ALL Ruger Mark IV 4 Pistols 10.9 Hardness *H5* WILL NOT FIT ANYTHING BUT MARK IVFITS ALL MARK IV FRAMES These use 1.5 mm Allen Driver.Part #46 on Standard Mark IV manual, #31 on 22/45

Safety Screw for ALL Ruger Mark IV 4 Pistols 12.9 Hardness *H1*

Safety Screw for ALL Ruger Mark IV 4 Pistols 12.9 HardnessWILL NOT FIT ANYTHING BUT MARK IVFITS ALL MARK IV FRAMES These use 1.5 mm Allen Driver.Part #46 on Standard Mark IV manual, #31 on 22/45

TacSol Tactical Solutions Extractor for Ruger 10/22, Charger, Mark 1 2 3 4 and TacSol X-Ring

Tactical Solutions Hardened Tool Steel Extractor. Fits Ruger 10/22, Charger and ALL Ruger Mark Series Pistols 1, 2, 3, 4 and 22/45. Improved hook design helps ensure consistent extraction each and every time. Machined from tool steel then hardened to...

NEW/OPEN BOX Volquartsen Standard Mainspring for Ruger Mark 1, 2, 3 Pistols Black- VC3MSR-3-B

OPEN-RETURN NO ISSUES-AS NEW   WILL NOT FIT ANY 22/45 FRAME(Click Here for Mark 2, 3 22/45 frame Volquartsen mainspring)Complete mainspring assembly designed for the Ruger MKII or MKIII. Mainspring components are wire EDM-cut and CNC-machined...

Custom Anodized Factory Ruger Reversible Picatinny Rail for ALL Factory Drilled/Tapped Mark 1 2 3 4 IV Pistols, 22/45 and Tac-Sol Pac-Lite (Pac-Lite needs different screws) in Matte OD Green

Ruger Reversible Picatinny Rail for ALL Mark Series PistolsWorks on FACTORY-DRILLED Mark Series Pistols.Same rail that ships with Ruger Mark IV LITE and Tactical Series Pistols-reversible-4-3/8" long-anodized aluminumThese are a special run of FACTORY...

Volquartsen Target Front Sight for 6" LLV (Scorpion, Mamba) and LLV-4 VCSFS-6

ONLY FITS 6" LLV UPPER(here's the sight for the 4.5" upper)Replacement front sights designed specifically for either the Volquartsen Scorpion pistol or LLV Competition Upper. Drop-in sights use existing pre-drilled & tapped holes.Model:VCSFS-6UPC:...

Volquartsen Mark IV 22/45 Magazine Base Pads 2 Pack

These base pads provide more positive magazine insertion, easier removal, and lightning fast reloads. CNC-machined from billet aluminum, these base pads fit the Mark IV 22/45 mag and will convert a Mark III mag into a Mark IV 22/45 mag.Does NOT come with...

TacSol Tactical Solutions Pac-Lite REPLACEMENT 1" Diameter Thread Protector (End Cap) Matte Red 1/2"x28

ANODIZING WILL NEVER BE AN EXACT MATCH FINISHTactical Solutions Pac-Lite 1" Diameter Replacement Thread Protector Fits Pac-Lite (current version) and All Ruger LITE 1/2"x28 Threads

TacSol Tactical Solutions Pac-Lite REPLACEMENT 1" Diameter Thread Protector (End Cap) 1/2"x28 Matte Gun Metal Gray

ANODIZING WILL NEVER BE AN EXACT MATCH FINISHTactical Solutions Pac-Lite 1" Replacement Thread Protector Fits Pac-Lite (current version) and All Ruger LITE 1/2"x28 Threads

TacSol Tactical Solutions PERFORMANCE SERIES Pac-Lite 1" Compensator Bright Silver 1/2"x28

CUSTOM COLORTactical Solutions Pac-Lite 1" Compensator Fits Pac-Lite (current version) and All Ruger LITE 1/2"x28 Threads

TacSol Tactical Solutions PERFORMANCE SERIES Pac-Lite 1" Compensator MATTE RED 1/2"x28

CUSTOM COLORTactical Solutions Pac-Lite 1" Compensator Fits Pac-Lite (current version) and All Ruger LITE 1/2"x28 Threads

TacSol Tactical Solutions Pac-Lite 1" Compensator Matte Quicksand (FDE) 1/2"x28

CUSTOM COLOR Matte Quicksand (FDE) Tactical Solutions Pac-Lite 1" Compensator Fits Pac-Lite (current version) and All Ruger LITE 1/2"x28 Threads